i noticed that when i have a formula that refers to a table, such as:
= sumifs(table1[heading4],table1[heading1],"A",table1[heading2],true)
i can copy-paste it, i also can fill (right or left) a selected range with it,
but, i cannot copy it (right or left) by dragging.
is it possible to concatenate in such a way that formatting is retained? For example, my =CONCATENATE formula refers to a cell containing 0.065, but which is formatted as a % so that the cell shows 6.5%. Concatenating that with text, however, produces "0.065 [text]"
View 4 Replies View RelatedI'm working with a multi-page workbook I use for work scheduling purposes.
This is how Sheet1 is set-up:
A
B
1
Name
[Code]....
In the cells in Column D I have used the following formula =IF('Sheet1'!B2="Yes","Holiday",""). What I have realized is that this formula is quite limited. For example not all 12 colleagues work everyday and they work different shifts on different days- each day's data is sorted so that the colleagues are organized primarily by Shift start time and then alphabetically by name- consequently if I used this formula across the entire workbook the Sheet1B2 data may not be consistently referencing the same colleague.
I was wondering if there was a way to amend the formula so that if a colleague is marked as 'Yes' in Sheet1, 'Holiday' could be inserted in Column D in the rows corresponding to where the colleague's name appears?
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
View 4 Replies View RelatedI have a Pivot Table on which I am unable to drag the row items (Salesperson Names) to a different position. What am I doing wrong? Attached Sample
View 9 Replies View RelatedOn the 'Total' sheet I'm wanting subsequent sheets to fill in on the rows. Do I have to redo the formulas for each row because it will correlate to a different sheet? I only know how to drag the formula down, but that doesn't seem to work right!
View 11 Replies View RelatedI have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A
Row2 56
Row3 44
Row4 65
AllData is a named range that refers to the range A2:A65536
AllData_UsedRange refers to A2:A4 by way of this formula.
=OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work...
ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address
Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A1:C2)
If I simply drag the above formula down I end up with
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A2:C3)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A3:C4)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A4:C5)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A5:C6)
I am trying to drag the above formula so that it copies in the following manner:
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A3:C4)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A5:C6)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A7:C8)
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A9:C10)
How can I achieve this result?
I am trying to link the cells up in a new workbook the problem is the data I need is setup in a way the formula needs to skip every other row.
For example:
I have tried absolute and relative on the formula in A5 of this sample data below to get A6 to equal D2 and so forth down the sheet. Nothing works except typing in the formula for each cell....
View 9 Replies View Relatedi have a formula that needs to be dragged down 65,000 rows in excel is there a quicker way of do it than with the mouse?
View 3 Replies View RelatedI have sheets with over 40000 rows. I grouped them in 60 and I need the average for every group on the 61st (which is blank). For example, when collapsed I have visible the following blank cells:
A61
A122
A183
A244
and so on.
What I want is to enter a formula in A61 for the average of A1:A60 then drag down and have the correct values in all the rest (average of A62:A121 in A122, etc.).
I want the range to stay as i put it without it +1 when i drag the formula down my spreadsheet, below is the formula im using (for a creche in case your wondering)
=IF(G5<A8,"Baby",IF(G5<A16,"Wobbler", IF(G5<A24,"Toddler",IF(G5<A30,"Playschool","Please use DD/MM/YYYY FORMAT"))))
G5, A16, is taken from a list of dates down the side so i need these to remain constant otherwise my formula goes out.
i wanna to put check boxes in colums d4:d41 with a formula inside which beginning with this formula (=Sheet1!$D$4) in cell d4.how to copy and drag down this formula into d5:d41?
View 8 Replies View RelatedI have data in every cell within a column. I want to pull data from every 7th Cell.
Ex.
Cell CP7 needs to reference AG10
Cell CP8 needs to reference AG11
This is my formula:
=DCOUNT(timeg15w!$A$1:$F$3909, "WPC",Criteria!A1:C2)
My question concentrates on this part of the formula:...Criteria!A1:C2
When I drag down the formula, it changes, as usually, adding 1 to the cells address, like this:
Criteria!A1:C2
Criteria!A2:C3
Criteria!A3:C4
BUT, I want the formula dragged down, adding 2 instead of 1, changing like this:
Criteria!A1:C2
Criteria!A3:C4
Criteria!A5:C6
How can I achieve this result?
I want to put in cell I3 the value from cell C1, to I4 the value of C49 and so on. How can I do it?
View 5 Replies View RelatedIs there an easy way to drag all the references to a cell in a formula quickly e.g If i have a formula like this is;
=IF(A1>0, A1+1,A1-1)
and want to drag all the references to the cell A1 to another cell in one go as opposed to one at a time?
In my worksheet i have pairs of data from A2:A18. cell A2 is paired with A3, cell A5 to A6.
In cell C2, I have the formula =IF(A2>A3,A2,A3). then in C3 I have =IF(A5>A6,A5,A6).
I would then like to be able to drag these formulas down to C7 and take the appropriate data.
So another example, cell C4 should be =IF(A8>A9,A8,A9).
I have seen many formulas for how to drag skipping a row, but couldn't find anything on pairs of data while skipping a row as well.
The worksheet is attached : TEST.xlsx
1. I have data A1, A2, A3....down a column.
2. I have one value on C2 ( constant value)
3. the formula is a very simple multiplication formula. I want to multiply every single value of column A to C2. But it needs to be in across a row that starts in
D4. So,formula needs to be in (D4, E4, F4) there are other datas in the worksheet
4. So when I input =$A1*$C$2 in D4 it calculates it fine but when i try to drag the formula across the row so [E4=$A2*$C$2, F4=$A3*$C$2...]
it repeates the same fomula as D4 and does not adjust for the increase in column number.
I am making a sheet that has many colums of data that I want to sumup colum wise. I am doing is using this macro ..
=============================================
Sub Add_Totals()
For Each NumRange In Columns("C").SpecialCells(xlConstants, xlNumbers).Areas
SumAddr = NumRange.Address(False, False)
NumRange.Offset(NumRange.Count, 0).Resize(1, 1).Formula = "=SUM(" & SumAddr & ")"
NumRange.Offset(NumRange.Count, -1).Resize(1, 1).Value = "TOTAL="
Next NumRange
End Sub...........
I have the following formulae in seperate cells were A1, A2 and A3 are the cells
A1 =MAX(Data!C2:C3)
A2 =MAX(Data!C4:C5)
A3 =MAX(Data!C6:C7)
I would like to drag the cells so that automatically the cells below A3 are updated as follows
A4 =MAX(Data!C8:C9)
A5 =MAX(Data!C10:C11)
etc up to 600 rows
Unfortunately it is not being updated in that order. Do you have any suggestions how it can be done.
I have a formula in the Name Define part of excel in workbook that refers to another workbook. =IF(COUNTIF([DaysWorking.xls]Sunday!$A:$A,'2009'!I1)>0,1,"")
The DaysWorking.xls workbook is a data workbook, users may change the data and after they are done, they may exit the program but not save it. The DaysWorking.xls workbook should always revert back to the original form. I've put a read only property on it, but the problem lies when the user saves the file under Save/As function. Excel then updates the link to whatever the user saves the file as. Is there a way to make sure that the formula never get's changed?
In the attached workbook, see the "P & L" tab, cells I30 to I48. The idea of the formula I have placed into these cells is to drag out the figures from column I in the "Trial Balance" tab of the workbook. A similar formula is used succesfully in the "balance sheet" tab in Column B. I don't understand why the formula doesn't work in the cells i've specified in in the " P & L" tab it seems to work for I8 and the rows immediately below it "revenue".
UK Trial Balance May 2014 V2.xlsx
I am trying to drag down a formula (see below). the cell reference A6 and E6 is not updating to A7 and E7 etc etc when i drag the formula down using the corner thing. it remains constant at A6 and E6.
=HYPERLINK("#INDEX('Shipping Tracker Week X'!$F$4:$F$3000,MATCH(1,('Shipping Tracker Week X'!$B$4:$B$3000=A6)*('Shipping Tracker Week X'!$D$4:$D$3000=E6),0))","Link 1")
im pretty sure the problem comes down to the hashtag and quotation marks that i added, as the formula properly increased the cell references when i drag down without the hashtag and quotations. however, i sort of need it because adding those seems to be the only way i can get the hyperlink to link me over to the other sheet and to the correct cell containing the hyperlink.
part 2 of problem: the hashtag and quotations is currently a workaround method for me. the original intention was for the hyperlink to directly link me to a website, which is referenced from a separate sheet. however, without the hashtag and quotations, i get a "Cannot open specified file" error.
I can drag it down to fill a series of cells within a column.
Let's say the formula in cell A1 is:
I am using a VLOOKUP formula, but when I drag it down it doesn't keep the same array selection. Is there a way so that I can drag it and it relates to the cell to the left, but the array selected stays the same. I don't really want to type the same thig out for every cell as there are 6000. I am using: =VLOOKUP(D2,Working!A2:C23,2,FALSE) and want D2 to change accordingly but for working!A2:C23 to stay the same.
View 2 Replies View RelatedI have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
View 1 Replies View RelatedI have set up a formula to sum data from specific columns in multiple sheets in the same file. The simple formula had worked perfectly until I needed the data from the last sheet. In all of the other sheets the data that I need to pull is all in consecutive rows but in the last sheet the data that I need pulled and added is in every 4th row. The sheet looks like this:
All of the columns I've filled in work fine. The ones blank are the ones I am running into issues with. When I drag down the formulas excel pulls the next consecutive rows, which is perfect for the first four sheets I am summing, but for the fifth sheet (I'll ref the Test1 column) I need it to pull 'Wayne 2014'!C6 and then 'Wayne 2014'!C10 in the next row and so forth.
Date
All Test
Test1
Test2
Test3
Test4
$ Amt.
Jan.16
=SUM(C2+D2+E2+F2)
[Code] ........
The first four sheets look like this, which is why they work fine:
Date
All Test
Test1
Test2
Test3
$ Amt.
Jan. 16
=SUM(C2:E2)
[Code] ........
The fifth sheet looks like this: I only want the formulas from the first sheet to pull the data from the dated rows in this sheet.
Date
All Test
Test1
Test2
Test3
$ Amt.
Jan. 16
=SUM(C2:E2)
=SUM(C3:C5)
[Code] ......
Is there any way in Excel 2010 to get it do what I want? (I am not sure how that one cell became outlined and I do not know how to fix it.)
I need a formula to drag down the attached that will place zeros infront of any numbers that don't have 9 digits. so if a part number consists of 6 digits then i need 3 zeros in front of it, if a part number consists of 9 digits then i dont need any zeros proceeding it.
View 2 Replies View Related