I have a macro that imports results from a website. I want the macro to continue working but every now and then when the format of the webpage changes I get the message 'Do you want to replace the contents of the destination cells?'. Is there anyway I can get my macro to not show the pop up box and to automatically choose OK (I do want to replace the contents of the destination cells) instead?
View 2 RepliesI am writting code that copys a range and then pastes the values back over the same range, which gets rid of the functions in the cells. I am doing this for multiple sheets. When the code pastes the copied selection back over the same range the code is interrupted by a message box that asks me wether I want to replace the contents of the destination cells or not. I do, how do I get my code to answer yes to this message box?
View 4 Replies View RelatedI want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
I used to write macros in 123 and compile and sell them. Now working in VBA I feel like a pre-schooler. I'm just trying to do a simple macro that will look at a cell (say D4) and evaluate the formulat there which might result ing a new location (like G10), and put a "Y" in G10, , then, after I enter a few more bits of information, it will, upon my keystroke (like CTRL-F) do it again, enter the "Y" in the new cell, whatever D4 says now. I know that this isn't hard--but I sure can't figure out how to do it!
View 6 Replies View RelatedI want to have a macro that will look at a few cells say A1 & A2 and then use the contents of the cells say 1Q07 & 2Q07 respectively to do a find and replace find 1Q07 and replace it with 2Q07. I want it to use the contents of the cell and not just the text because the contents of the cell will change each time used. I tride to do it here but I dont have it yet. It doesnt seem to pass the value to the variable and the variable doesnt seem to do the find and replace.
Private Sub Update_Click()
Application. ScreenUpdating = False
Dim quarter As String
quarter = CStr(txtquarter.Text)
txtquarter.Text = CStr(quarter)
Sheets("Income Statement").Select
Dim oneq As Single
Dim twoq As Single
Dim threeq As Single
Dim fourq As Single
Dim fiveq As Single
oneq = ActiveSheet.Range("A2").Value
twoq = oneq - 1
threeq = twoq - 1
fourq = oneq - 4
fiveq = oneq - 5
I want to set up a sheet macro that will replace the contents of a cell (when a specific number is typed in) with a specific formula.
For instance, when "43" is typed into any cell within specified columns (say columns C and H), it changes to the following formula: =IF(D47="",43,IF(D47<=3030,408,43))(WHERE D47 WOULD REPRESENT THE CELL ADJACENT TO THE CELL WHERE "43" WAS TYPED.)
IE:
If "43" was typed into cell C1, then it would change to the formula: =IF(D1="",43,IF(D1<=3030,408,43))
If "43" was typed into cell C50, then it would change to the formula: =IF(D50="",43,IF(D50<=3030,408,43))
I have created a desk planning spreadsheet in excel. Each week a mailmerge sends out an email to everyone in the office asking them to confirm when they will need a desk in the next week.
As the normal employee doesnt get involved in desk planning I want them simply to state whether they will be in the building or not by entering "GH" (our building) in a cell under each day in the email they get sent.
When the reply comes in we select the cells from the email and then paste them into the desk planning spreadsheet.
-----
WHAT I NEED TO DO:
Select some cells (must be in the same row - that we have just pasted in).
Press a button on the Worksheet labelled "Auto Assign Desk", which does this:-
For each cell that contains "GH", replace with the right-most cell to the left of the selection that starts "GH_"... (this is the start of a unique desk reference (GH_1_1, GH_1_2,etc.)
-----
This will assign the employee to the desk they were sat at last, when they are in the office next week.
I am trying to create a destination cell by concatenating several cells and text together. A1 = Folder Name, B1 = File Name, C1 = Tab and Cell. In D1, I am creating a formula that concatenates all the cells to create a destination. This obviously doesn't work so I run a macro to copy, paste special values which displays this in E1, ='FolderName[File Name]Tab'!Cell. The pasted formula works but only after you click on the cell and hit the enter key. Is there a better way to do this?
View 2 Replies View RelatedI need vba code to flash the destination cells when hyperlink is clicked.......
View 3 Replies View RelatedI am trying to combine the contents of two cells depending on the contents of another, I have tried to use the If function but am coming up stuck!
I have provided a link to the example file below:
[URL]
I have a column in my .XLS whose contents I want to change depending on what the contents of the cells of a different column are. However, I only want two cells from the same row to be dependent on each other. So, for example, if $A$1 reads "1" then $B$1 should read "apple" and if $A$2 reads "1" then $B$2 should read "apple"; if $A$12 reads "3" then $B$12 should read "pavement" etc.
View 11 Replies View RelatedI am working with a spreadsheet that has our user data; User(First) Name, User(Last) name, Computer Name, MAC address, Phone Number, Seating Position and Network Port Number.
I have let this get horribly out of sync, moved computers around, and moved them while the MAC address column was hidden, As a result, I have a bunch of users listed as being at the wrong computer. I have a second spreadsheet I generated that gives me the logged in user for about 2/3 of my computers, with the computer name(Just 2 columns, 'A' and 'B'. I would like to have Excel match the computer name and then overwrite the user name. For example, if the first computer in my correct user list is DELL-99945ty2, and the user name is "Jimbo Jones", I would like it to search the first Excel doc(The one with all of the user data), and replace the user name with "Jimbo Jones". Is this simple and straightforward?
In my main spreadsheet, the user name is in column B and the computer name is in column G, So I want to use the values from Column B in my second document to find its match in Column G of the first spreadsheet, and then replace the data in Column B with Column A in the first spreadsheet.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I am referring to the post made by NBVC at http://www.excelforum.com/excel-gene...xcel-help.html, Try: =IF($A1="",INDIRECT("A"&ROW()-ROW($A$2)+COLUMN(B1)),"") in B2, copied across and down
I have a similar case but there are no empty rows between lists, what would be the formula to get the same results? (The transposed address should appear next to each first line of each block).
Earlier, I posted at http://www.excelforum.com/excel-gene...-one-cell.html and I got brilliant answers, I also would like to get benefit of the above mentioned formula but in cases when there are no empty rows between lists.
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedI have written this code to clear the contents of certain cells, lock the content of others and protect the sheet again it works on sheet1 but not on sheet 7. This is suppose to happen when the Print button on my sheet is clicked.
View 4 Replies View RelatedI have a spreadsheet that has columns stating both status and then further to the right in the row, currency totals. There are only two status options, Stocked and On Order. I need to add the total currency amounts based on this other column's listing and it must change if status changes.
(Put simpler:
Column A lists Stocked or On Order and Column B is the currency tied up in that row.
I need to make totals for the cells in column B based on the status listed in Column A and it must change when Column A is changed. This should result in two totals, one for Stock Status Currency and one for On Order Curreny)
I want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
About half of the time when I move the contents of a cell I get the message "The Clipboard cannot be emptied. Another program might be using the Clipboard"
View 14 Replies View RelatedIs there a way using a macro to check each row in Column D and Column F for "0", so that when both columns in the same row have "0" and only when both columns in the same row have "0" the contents "0" in that row of Column D and F will be deleted?
View 2 Replies View RelatedI am doing a "text to columns" in a VBA script and each time it runs I get a "Do you wnat to replace contents of the destination cells" prompt. I will always say yes to this prompt. Is there something I can put into the code to avoid this prompt all together, again the answer will always be yes to the prompt.
View 3 Replies View RelatedMy computer runs on Excel 2003 but my Laptop is on Excel 2000, the problem is I have the below code on a spreadsheet I wrote on my Computer which runs fine but when I open it on my Laptop it comes up with a run time error it doesn’t like the clear contents line. If some one could explain to me why it is happening and how to get round the problem so it will work in Excel 2003 and 2000.
Private Sub Workbook_Open()
Application. ScreenUpdating = False
Sheets("data").Visible = xlVeryHidden
Sheets("Incidents").Visible = xlVeryHidden
Sheets("Front Sheet").Select
Range("A17:S17").Select
Selection.ClearContents
Open1.Show
Range("A17").Select
Application.ScreenUpdating = True
End Sub
Have been searching the forums for an answer but to no luck very new to excel. What i hope to try and do is change amount in numbers in cell range E4 to L23 which might include a decimal place to the text value in cell F1 leaving all blank cells blank.
I would if possible like to apply this macro to many sheets with lots of different titles in the same workbook
These are 2 examples of is the sort of thing i have been playing around with the bits in red are what i think i need to fill out hopefully i will be able to find some code to appy it to all sheets and add it on. Am I going down the right route
Sub replace1()
Dim rep As String
Dim newrep As String
rep = Dont know what to put here to make it apply to ant number
newrep = Dont know what to put here to make it contents of cell F1
[Code]....
In column A, i have cities.
In column B, i have dates.
I would like column D to have both the city and its corresponding date e.g. "paris (12/06/2013)"
However, I am getting "paris (41437)". Is there anyway to make the date appear properly?
I cannot "BOLD" the contents of cells in my spreadsheet by clicking "B" on the menu bar. However I can do so by clicking on "Format - Cell - Font" and then using the selecting the Bold option. I wonder why this happens.
View 2 Replies View RelatedCell A3: Abbott, Robert M.,MD
Cell A4: Bussiere, Laura P., ARNP
Cell A5: Bradford, Melinda ARNP
I have this data in Column A and I'd like each person's last name to appear in Column A and the first name to appear in Column B and the credentials to appear in Column C like this:
A3 B3 C3
Abbott Robert MD
A4 B4 C4
Bussiere Laura P. ARNP
A5 B5 C5
Bradford Melinda ARNP
Also I'd like to be able to do the same with addresses:
In Row Q I have:
Q35: Jacksonville, FL 33204
Q37: St Augustine, FL 32092-1850
I would like this to appear in the sheet as follows:
Q35 R35
Jacksonville 33204
Q37 R37
St Augustine 32092-1850
I don't need the state in any cell. It can disappear as well as any commas. Is any of this possible?
How can I let cell F5 for example contain both the texts or contents of cells A1 and B1? Is there a function that can do that purpose?
View 5 Replies View RelatedI am working on a sheet where I want the contents of cells D1:D10 appear if cell A1 has a text in it and the contents of cells D1:D10 disappear if cell A1 is blank. What is the right conditional formatting formula for this.
View 3 Replies View RelatedI have a dropdown list in the range E17:E91 containing a list, and two of the values in the list are "DI" and "LTC". What I need to happen is if either of these are selected, the corresponding cell in column F needs to have it's contents cleared. Ex. if in E17 the value is ever either DI or LTC, cell F17 gets contents cleared. if column E contains ANYTHING ELSE, nothing happens. That's all, I've taken care of conditional formatting and data validation already. So even if data is pasted in the worksheet into column E it needs to recognize that and always act in real time.
View 14 Replies View RelatedI would like to do now would be to only copy the rows that also contain the word sold in column C. I guess that I could do this in two stages, first copying the rows based on the year then copy again based on the word sold in column C. It would be nicer to make a slight modification to my code and do it all in one step.
View 2 Replies View Related