Replace Cells With Numbers In With Other Cells Value
Nov 5, 2011
Have been searching the forums for an answer but to no luck very new to excel. What i hope to try and do is change amount in numbers in cell range E4 to L23 which might include a decimal place to the text value in cell F1 leaving all blank cells blank.
I would if possible like to apply this macro to many sheets with lots of different titles in the same workbook
These are 2 examples of is the sort of thing i have been playing around with the bits in red are what i think i need to fill out hopefully i will be able to find some code to appy it to all sheets and add it on. Am I going down the right route
Sub replace1()
Dim rep As String
Dim newrep As String
rep = Dont know what to put here to make it apply to ant number
newrep = Dont know what to put here to make it contents of cell F1
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
Macro to clear cells with numbers but no cells with formulas with in this macro:
Dim i As Long i = Range("E3") If i > 0 Then ' Copy range Range(Cells(6, 10 + i), Cells(500, 17)).Copy Range(Cells(6, 10), Cells(500, 17)).Select ' Paste special ActiveSheet.PasteSpecial Format:=2, Link:=1, _ DisplayAsIcon:=False, IconFileName:=False ' Clear i columns on the right Range(Cells(6, 18 - i), Cells(500, 17)).ClearContents End If End Sub
The range is where the cells with numbers need to be cleared but not the ones with formulas.
In one of my worsheets in the excel document, I have data as shown below:
Name Description Minimum Values Maximum Values ABC test desc {0.0, 0.0, 0.0} {1.0, 1.0, 1.0} DEF test desc {{0.0, 0.0, 0.0},{0.0,0.0,0.0}} {{1.0, 1.0, 1.0}, {1.0, 1.0, 1.0}}
Basically for a 1D array, the minimum and maximum values are within one set of brackets, whereas for 2D array (as shown in the second row), there would be nested brackets with comma after every closing bracket being a row separator.
My requirement is to write a macro to replace the minimum and maximum values in every row of the worksheet (I do not know the exact number of rows as it could vary) with just one value instead of repeated values depending on the size of the array. In other words, I am looking at the below output:
Name Description Minimum Values Maximum Values ABC test desc 0.0 1.0 DEF test desc 0.0 1.0
1. I have an original list of IP addresses which contain many duplicates. 2. I used "The Duplicate Finder" Add-in and created a unique list of IP addresses from the original list. 3. I did proprietary search on the unique IP list to get an approximate geographic location of each IP address.
Now I want to match all the IP search information to all the duplicates in the original list.
It's difficult for me to craft an exact question without knowing the proper terminology, so I'll "illustrate" a few point below.
Original List of IP addresses in a single column (IP Address)
Unique list of IP address with additional info in 3 more columns (4 columns total)
IP Address Country State City 12.34.56.78 USA CA SomeName 98.76.54.32 USA NY AnotherName 95.62.84.37 GB England Ye OldeName 55.11.99.225 MX EL SmokyCity 23.56.89.14 USA WA RainyCity 78.56.12.43 USA FL ViceCity
What I want to do is if an IP address in the original list matches the IP address in the unique list, the original IP row is replaced with the matching IP row in the unique list.
I have a list that looks like the list on my sample file. You will see ME28A16 at the top and the bottom of the list. I want to fill the Cells inbetween with that value. In my real file It may start ME or it may start PE
Here is the Script that I am using but I can not get it to work:
Dim CurrentRow As Long Dim LastRow As Long Dim CurrentText
LastRow = Range("A65000").End(xlUp).Row
For CurrentRow = 1 To LastRow If InStr(4, Cells(CurrentRow, 4).Value, "M", vbTextCompare) > 0 Or _ InStr(4, Cells(CurrentRow, 4).Value, "P", vbTextCompare) > 0 Then CurrentText = Cells(CurrentRow, 4).Value Else Cells(CurrentRow, 4).Value = CurrentText End If Next CurrentRow
I would like to create a macro to search all blank cells within a certain range in multiple worksheets to replace it with a certain blank cell. Essentially i would like to use a special values function to do this.
I have a macro that imports results from a website. I want the macro to continue working but every now and then when the format of the webpage changes I get the message 'Do you want to replace the contents of the destination cells?'. Is there anyway I can get my macro to not show the pop up box and to automatically choose OK (I do want to replace the contents of the destination cells) instead?
Is there a formula where it will find all that reads 07-06 and be able to change it to 08-06? Below are samples of formulas where I am looking to change 07-06 to 08-06 without having to go into each cell and manually changing 07-06 to 08-06:
I use an old accounting program to download sales history into excel. For sales where there is only one line item and therefore 1 row, there is no problem. Sales with multiple items show a summary of the sale in the first row and the line item details in rows after.
On multiple item sales (shaded in yellow), the total postage is shown in the summary row (shaded in orange). The postage fields in the line items are blank (shown shaded in blue). I need to split the total postage by number if line items and put the value in the line items. i.e. if the total postage is $10 for two items, I need to show $5 for each line item.
The summary row identifies the number of line items in the "Qty" column ( cells in green). This cell could be used to divide into the postage (in orange) and also count how many rows below to put the answer in
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I have a excel which contains 5 columns in which 5th column data cells has to be replaced with another set of data which have relationship with other 4 columns data.
I have many sheets in my workbook with many filled or unfilled cells... I want that any cell in my whole workbook should be filled with " " ie a space if it is currently blank (ie don't touch the cells which have some data) and as there are many cells in a sheet .. I don't want to fill them with spaces as the file size will increase... I just want to do this for cells A-1 to AB-200.
What is the way of doing this with a formula or programming ie without macros... (or is macro the only way?) What if I just want to do this to a sheet and not to the whole workbook.
I am looking to Find and Replace (via ctr-F) but I need to replace it only within a range of selected cells. Each time I try to do this it replaces everything even though I have tried selecting each cell and replacing only that. Is there a way to select a certain amount of cells and replace?
I have a macro which will search a document in specific range and find specific cells if found = replaced to data from my list ...
I want to change it to: if found = delete cell + delete 4 cells on left... + At the end I want to see msg bog saying how many time it find the spec cells... (not how many cells has been deleted.
Sub Find() Dim myList, myRange Set myList = Sheets("sheet3").Range("A1:A10") Set myRange = Sheets("sheet3").Range("D1:F100") For Each cel In myList.Columns(1).Cells myRange.Replace what:=cel.Value, replacement:=cel.Offset(0, 1).Value Next cel End Sub
In cell M32 there will either be an O or the cell will be blank. In cell T51 I had placed an IF statment like this:
=IF(M32="O","","X")
Now that works ok but there is a glitch on my part. If T51 is blank because of M32 containing an "O" then the user will also enter a number into T51. Because I was using an IF formula in the cell it gets overwritten because of the user needing to enter data in the cell because of M32 containing a O. How do I write a macro so that a similar formula is used but still able to enter data manually without overwritting the formula?
This worksheet has around 40,000 records, and I need to create a Macro that will ask the user for a date, and when the user enters a date the macro goes through column A and finds all of the matching dates and then replaces the numbers (along with the formulas) in the corresponding Add Returns cells (column E) with 0's.
I have only been able to create an inputbox, but I am completely lost regarding the criteria due to being very new to VBA.
Sub ClearData() Dim EnterDate As Date Dim msg As String
I have a list of values of sheet titled "exclusives" column B Row 2 to Row 250.
Hence, if any of these values are found in sheets "1", "2", "3" and "4" in column C (of each sheet) replace the existing value with "Brand".
In addition after this bit I then need it to look up every new "Brand" and for the eight columns preceding (after) the new value I need to be cleared (any entries in those columns in that specific row of the "Brand" value deleted).
I would like to be able to replace all cell values in a range of 20c by 20r (i.e. 400 cells). In all cases the condition would be the same (find all cells with a value greater than than zero), but then replace with different values.
e.g. Cells with value >0 in range CX119:DQ138 replace with "NT", then cells with value of >0 in range DR119:EK138 replace with "NU"
I thought you could do it with find and replace by just selecting that range of cells but can't see how to set the conditional >0 bit.
I need to make sure that splited cells do not replace content of other cells. For example, if A1 has "SDR232, SDR634", this code will split them and put A1 to be "SDR232" and A2 to be "SDR634". BUT what it does is that it actually replaces whatever I have in A2. Is ther anyway to avoid replacing the content of A2?
Sub tst() Dim X As Variant X = Split(Range("A1").Value, ",") Range("A1").Resize(UBound(X) - LBound(X) + 1).Value = Application.Transpose(X) End Sub
I've written a very simple script to replace carriage return characters with <br> tags (so I can use the output in html pages) - however for some reason when I loop the script down the cells, it ignores certain cells and works perfectly on the rest.
The only 'variable' I can spot is that the ones it misses tend to be longer cells with more text (the one's that failed were 938 characters and 910 I think).
Can anyone tell me if there is a limit on how big a cell VBA can process and if so, how I can work around this? Is it possible to load and parse each character one by one in VBA or something?
Private Sub CommandButton1_Click() For Each cl In Worksheets("CREDIT (GENERAL)").Cells.SpecialCells(xlCellTypeConstants, 23) cl.Replace What:=Chr(10), Replacement:="<br>", SearchOrder:=xlByColumns Next cl End Sub
I need some sort of code to check through a selection of cells in a column and make those cells "zero" whose value is equal to the first cell in the selection. e.g., let's say I have a key value entered in cell e6 = "2.99".
E6 F6 G6 H6 I6 J6 2.99 5.25 2.99 2.00 2.99 5.00
So the macro should be able to check the value in cell E6 (i.e. = 2.99) against values in cells from F6: J6 and any cell having the same value as cell E6 (2.99) should be made = 0. So, in the above example cells G6 & I6 will have "0" value after the code has been executed. I have close to 50 rows going down starting from cell E6. For example, E7 has a value which has to be checked against the range starting from F7 to J7 and so on and so forth.
On the worksheet, I need to find wherever the cell value begins '2 X 4 ...' in column L, and then replace the cell value in the same row, in column K, with '113010'. In my attempts, my code just changes the first occurrence, not all occurrences.
I want to use VBA to do this.
Here's my code so far:
Sub Update_Product_IDs()
Application. ScreenUpdating = False Dim i As Integer, iCount As Integer Dim numberOfPMDs As Integer Dim PMD_Name As Integer Dim worksheetName As String Dim worksheets_in_file As Integer worksheets_in_file = Worksheets.Count worksheetName = Worksheets(2).Name numberOfPMDs = worksheets_in_file - 1
