How to retrieve client profile by typing client id in a particular cell ??
i.e. if Client ID is OD001 .... is it possible to get the details of that client by typing OD001SS which i have created on another work sheet ??
I'm trying to do here is take the value of a certain cell (client number) and set another cell to be the name of the client. For example if I were client number 100 and my company name was Holman Inc the user should be able to enter 100 and Holman Inc would populate itself in the next field.
View 2 Replies View RelatedI have an excel file from a data dump. I need to populate the client name next to the total. There is no unifomed lines between the different client files. The file has over 12,000 lines I am in need of a formula to poplulate the blank cell. See attached file.
View 2 Replies View Relatedto send a single email from a list if addresses from cells in a single column...i have figured out the code to add the range of addresses but my only problem is that with this code it uses outlook...my default email is gmail and i can send email from single cells this way, however when i run the code it opens it in outlook..i do not now how to change the code i have to open gmail instead of outlook..
View 15 Replies View RelatedI have been sent a document of clients names that I need to check against our own, is there a way on excel in which I can see if there are any matchers between our client list and the one I have been sent. It is for security purposes.
I do not fancy Ctrl - F 4000 client names
I have a workbook to track clients served. The first sheet has all of the data entered into it. The name, age, demographics, services. The second sheet is a template of the individual client's pages, summarizing their information and services received. I want to code the sheet so that once a new client is entered into the table on sheet 1, the template will automatically be copied to the end, renamed, and the basic data for the new client will be pasted into the new sheet.
I've been working on this project and done a ton of googling. And also am very new to VBA. I have found a solution that works:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$2" Then
Sheets(2).Copy After:=Sheets(Sheets.Count)
[Code]....
But I really don't want to do 50 "else" clauses for each line where there could be a new client. So I was thinking, if i could find a way to do a relative reference, such that it selects the cells to copy relative to the one that was changed within the range of that column, then I would only need one "if" statement. Is that possible? Is there some way to change the "B3" in target_address to "any cell in column B" and then range "A3" a few lines down would somehow be "1 cell left of the one changed" and the range "A3:K3" to copy would be "1 left:9 right" of the one changed. I know this may be impossible or just not how VBA language works, but I thought it'd be a lot easier than 50 repititions of if..then...else....
I have sales data for Clients that has the client name month and year(combined for date) and revenue for each month. I would like to take all clients in a given month and see the average revenue per client and then be able to display that in a bar chart by month. I also have the data loaded into a PowerPivot Data Model.
View 1 Replies View RelatedI seem to be coming on here every day at the moment! Someone helped me with this code, it works great apart from 1 error, which stops the script. The lines that appear when i select debug are in italic / bold. The error message appearing is:
"Object invoked has disconnect from its client" or something very similar.
'Define variables.
Dim lngRowPasteTo As Long
Dim codelive, codeclosed, codeassigned, vLookFor As String
'Set variables
vLookFor = "Closed"
codelive = "gio1"
codeclosed = "gio2"
codeassigned = "gio3"
Worksheets("Live").Unprotect Password:=codelive
Worksheets("Closed").Unprotect Password:=codeclosed
Application. ScreenUpdating = False
MsgBox ("Moving Claims...")
'Ensure the 'Live' tab is selected (active).
Sheets("Live").Select
'Remove any existing AutoFilters.
ActiveSheet.AutoFilterMode = False
I have a long list of data (around 10,000 rows) with one column Client Sensitive (Column A see below) that needs to be changed before using in a pivot so the client won't see this data.
At the moment I'm using a formula but happy to use VBA for this as the rest of the report updates with VBA.
The formula that works but takes far too long is
=IF(COUNTIF($A$1:$A2,$A2)>1,VLOOKUP($A2,$A:$R,18,FALSE),MAX($R$1:$R1)+1)
Where column A is the sensitve data (and the unique identifier) and column R is the column the formula is entered.
The below is what I want, the column R I now use in a pivot to get the results I want then I can hide that column and delete Column A so no Client Sensitve data is with the spreadsheet.
However as I've said it takes far too long to calculate down 10,000 rows..
Column A
Column R
A12345
1
[Code] .....
I have monthly reports of sales by client number. I am now trying to pull the annual sales info by month for one client by name. Eg. each month, XYZ ltd has sales figures for various products. Is there a way of me grabbing all his sales info for the year with out having to open each spreadsheet
View 3 Replies View RelatedI developed an Excel application for some users. Everything used to wrok very well until recently. When the click some buttons, the error "Automation Error: Object has disconnected from its clients" appears. Problem is, everything works very well on my PC. We run the same Excel version, same OS but I can't seem to find a solution to this problem. I'd have posted the code I'm running here but I don't know how to use the code tags and I don't want to be banned from this forum.
View 6 Replies View RelatedI have developed a product that's a bunch of Excel spreadsheets strung together. Real estate and mortgage professionals use the tools to counsel home buyers. We include a pdf converter in case recipients of emailed file attachments don't have Excel.
We provide an 'Export' procedure that calls a custom dll that uses the outgoing mail server that the user [must] setup or our web's mail server as a default. The action attaches the Excel or the PDF file and sends in the background. We use an Excel form for user to write the message and the process saves a copy of the message sent and the file send in an Archives folder.
This procedure is not very user friendly, as it does not offer the user's address book to select a recipient, does not put the message in the user's email client Sent folder...Plus the Archives folder could become quite large...plus it involves a user setup that creates alot of support calls.
But actually the most critical shortcoming has become that ISPs (Comcast and ATT so far) are blocking the use of custom email clients!
Recently my son showed me in QuickBooks their attach file-to-email process. It simply opens the user's default email client with the file attached. I need an app that does that! And it needs to be distributable.
Shared Workbook
"Existing Risk Changes" worksheet is "Very Hidden"
getting the "Object invoked has disconnected from its client" Run Time Error.
I'm not getting the error when the workbook is not in shared mode.
Code:
'When Submit is clicked there is a check done to make sure that the submitter has enterred a name:
Private Sub cmdSubmitEdit_Click()
[Code]......
I need help with a formula to calculate average number of rebills per client.
I don't know how to get excel to add the number of unique client in a given row. Example
Column A
Client 1
Client 1
Client 1
Client 2
Client 2
Client 2
Client 3
Client 4
Client 4
Client 4
Client 4
Client 5
Formula needs to calculate number of Unique clients. In this case, the answer is 5, but how can I get excel to calculate for me?
Ever since I updated to excel 2010 I am getting this error "Automation error: the object invoked has disconnected from its client" for this line
Sheets("Data-History").Range("E" & Rows.Count).End(xlUp).Offset(1).PasteSpecial Paste:=xlPasteValues
I have created workbooks for four health regions to collect data, which then needs to be resubmitted via FTP, but with de-identified data. The end users have little to no excel experience, thus had to make it simple as possible. Created a button that runs the macro (below) to deidentify (clear) all cells where there could possibly be personal identifying information. Runs fine on my cpu, but one user (so far) has received the error noted in the title. Both running excel 2003 with SP3 (I have version 11.8169.8172, user has 11.8316.8221), I have XP professional SP2, user has XP professional SP3. Spent hours searching and reading suggestions online, to no avail.
View 3 Replies View RelatedWhen I test the email link on my computer, the 'Outlook Express setup' wizard initiates. However, I don't use Outlook Express (Yahoo and Zimbra).
I am wondering of it is possible to automatically ensure that in cases where a user doesn't use Outlook Express by default that Excel will open the users default email client- which could be a web browser or another application? Is this something determined by each users (Control Panel?Registry?) settings for handling email hyperlinks? Is there a piece of VBA code I could include in the workbook which identifies the relevant email client to open?
I know I can simply provide my email address on the workbook and allow a user to copy/paste it into their email application but I feel that by minimising the amount of effort required by a user to provide a rating that I'll be more likely to receive user rating feedback.
I have a spreadsheet using an Input Form (user cannot get to the spreadsheet to enter data - they must use the form). This is working well.
What I need to do now is allow the user to retrieve data that is already entered. Example: Spreadsheet has 100 unique records (rows). In each is ID, Name, State, Dues, and about 20 other columns of information.
I need to allow the user to key the ID # and then up pops all the other information for just the ID provided. I will also need the ability for them to then change that information if needed.
So if they key 13WIL they will get Wilson, TX, $50, etc. And then they can make changes to any field needing a change. Add a phone, change and address, etc.
I was curious if Excel was able to pull information off websites and automatically populate a table such as items from Safeway and a price then another column for Walmart with same item and price? I am betting not on its own but I figured this was the best place to ask since I am trying to find an easier way to find savings at the store.
View 2 Replies View RelatedI get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets.
sheet1.jpg
sheet2.PNG
In the attached spreadsheet I need a formula to extract the value from column C that matches the date in Column E where the date in column E is equal to or falls between the dates in Columns A and B.file now attached.
View 4 Replies View RelatedIs there a way I could achieve copying cell's content minus some characters?
For example in the cell A1 would be: "two apples"
I would put into the B1 cell something like =A1(-4charactersincludingspace) - the result in B1 should be "apples"
Is it understandable what I mean?
I am trying to get a formula that will return the immediately adjacent value to a cell that is "lookup-ed". However, the Lookup cell is not in a constant column?
I tried Vlookup though this needs to specify a column, however i don't know the column until initial data is entered. if there's a formula that enables something along the lines of the 'thelookup cell plus one" that would likely work?
How would one retrieve an email address in a cell if it appears randomly ?
In Cell A1, let's say the content is:
Hi My name is Peter, my email is peter@mrexcel.com
In Cell B2, let's say the content is:
Good morning, you can reach me at isabelle@yahoo.com
What I was thinking is maybe start by finding the @ with =Find("@",A1) this will give me the position of the "@".
How can I tell excel to give me the string before and after the @?
I have created a number of complex functions that use or create 1-dimensional numeric arrays in VBA, and I would like to store and retrieve some of these arrays within single cells of a worksheet so that I can use them in dependent functions without having to store and display the entire array with one element per cell, and without having to recalculate the same intermediate array multiple times within VBA.
Are there any existing worksheet or VBA functions (or is it possible to create two functions) that can convert and store an entire numeric array within a single cell of a worksheet (e.g., as text), and then convert this back into a form which can be read and recognized as a numeric array by another function?
Or is there any other way to avoid filling my worksheet with arrays, or having to recalculate them each time within VBA?
I have a large table with data to which I want to retrieve a name to the left of a certain cell.
Clear as mud so far!
I've put together a small example of what I'm after. In cell F9 is the MAX of cells F2:F7. In cell H3 I then want a formula that will find the MAX of F2:F7 and return the text five rows to the left of that cell. In this example it would be Fred.
The second part of this question is how could I get it to display if more than one person had the same total....
I would like to test how many cells have been merged in a given cell. I know about the MergeCells property which returns true if the cell is merged. But how do i retrieve the number of merged cells in that cell (supposing it is merged, of course).
View 3 Replies View RelatedI have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
View 1 Replies View RelatedSo I have the macro written, but I don't get the complete data that I am looking for. This is what I am trying to achieve
Here is an example of what I am trying to achieve. This is in the first sheet:
Column A Column B
Car Saw
Dew Jacket
Pen Key
Saw Screen
Hand Shoe
Jacket Window
Screen Sock
Screen Mouse
Now I want this in the next sheet:
Column A Column B Column C Column D
Car Saw Screen Sock
Car Saw Screen Mouse
Dew Jacket Window
Pen Key
Saw Screen Sock
Hand Shoe
Jacket Window
Screen Sock
Screen Mouse
In my current macro, It displays most of what I am looking for, but not a duplicate ID if there is one. For example Screen, there are 2 IDs. My macro is only getting the first one and then skipping over the second ID. I would like it to where if there is a double or if it is there more than once that it gets all of the data.
Here is my macro.
[Code] ....
I will also attach the document of what I am looking for : Data 1.xlsx
Can I retrieve, from VBA, the exact value of a cell?
If in A1 I write 0.12348 with general, number or text format, from vba with MsgBox ActiveSheet.Cells(1, 1) I obtain 0.12348.
If in A1 write 0.12348 with currency or accounting formats, from vba with MsgBox ActiveSheet.Cells(1, 1) I obtain 0.1235.
Naturally, I need retrieve complete values from cells with format accounting?
My Excel 2010!