How can I reflect the correct trainee count for Day1-Batch1?
Currently columns F,G,H computes for expected, actual and total variances of trainee respectively reference to the training date J3.
Since this is a 2-day per batch even, I could not capture the 1st day trainee total of every batch because I divide the sum by 2 (2 day / training batch). The sum is only corrected on the 2nd day.
Attached herein is the sample file.
I recorded this sumif in VBA, but know I am trying to figure out how to tie in the last row reference in place of the 27.
=SUMIF($AR$2:$AR$27,$AR29,AS$2:AS$27)
FormulaR1C1 = "=SUMIF(R2C44:R27C44,RC44,R2C:R27C)"
See attached for an example. I'm trying to use the SumIF funtion with a named reference as the criteria. Here is my formula. =SUMIF(B10:F10,"<MinReq",B10:F10) It keeps returning 0 even though there is valid data.
View 3 Replies View RelatedI am trying to use the sumif and indirect function together but I keep getting an error and I'm not sure why.
Actual formula:
=SUMIF('SWG OR'!B:B,A168,'SWG OR'!E:E)
Using the sumif/indirect function, I have the following:
> Cell B5 contains the name of the tab "SWG OR"
=sumif(indirect(B5&"!B:B",A168,B5&"!E:E"))
I attached a file I made conditional formatting on cells C4..G6 which makes any number less than value in cell C15 invisible. In line " Total" I used SUMIF formulas which ignore any value less than 30. However the formulas should not contain static numbers but rather a reference to cell C15. But I simply cannot make it work.
View 2 Replies View RelatedI'm trying to reference a cell on another worksheet in my criteria and the formula doesn't seem to be working. All I get is a value of 0.
= SUMIF(G3:G76, ">='City Wide'!B6",I3:I76)
If I replace 'City Wide'!B6 with an actual number the formula works. This does not help as 'City Wide'!B6 is a value that can change.
I have a list of codes from which I'm trying to extract all unique entries.
For example, col A has 001, 001, 002, 003, 003, 003, 004, ...
I'm trying to create a report template with formulas that reference col A and return a single unique entry for each code so that the new column has only 001, 002, 003, 004.
Essentially, the codes reference customers. A customer can have multiple purchases -- but I'm trying to create a report in which I can utilize SumIf formulas to Sum the purchases for each customer and represent those purchases on a single line per customer code.
The catch is that the purchases change monthly (i.e., next month the purchases may be 001, 002, 002, 002, 004) so my report template needs to have the flexibility to adapt without me rewriting the SumIf formulas and return SumIf results for only customers 001, 002, 004. Whereas in the prior month, the report returned SumIf results for customers 001, 002, 003, 004.
In the expense log, Column C is a list of Dates and Column I is a list of expenses. I want to Sum the expenses in the 'Expense Log 09' to a new sheet based on a Date entered in H24 on the new sheet. I have tried the formula as shown below and Get the result #NAME?
=SUM(IF(Expense Log 'Expenses Log 09'!C8:C100,H24,'Expenses Log 09'!I8:I100)). I would Like to SUM all expenses After the posted date including that date.
I need to create formulas that reference a single date and output date ranges. The objective is to have a person input a Monday date in any given month and receive a four weeks out worth of dates and ranges. For example: In a lone cell, the person inputs 10/13/08. Automatically, the sheet produces the next full week range: October 19 – October 25 in a single cell and also produces a cell for each date. Example: Sunday 19, Monday 20, Tuesday 21, etc…. It should look like:
Monday Date:
10/13/08
October 19 – October 25
Sunday 19
Monday 20
Tuesday 21
Wednesday 22
Thursday 23
Friday 24
Saturday 25
and then repeat for three more weeks. I thought I had it figured out until the month changed. The dates continued in October instead of adding a month. This report will be ran weekly, so simply adding a +1MONTH to some cells will not benefit me as I’ll have to change the formula every week. I want the formula to compute the data without any manipulation over the next several years. The only change will be the Monday date.
I have todays date in cell A2. I have a range of dates in a row 4 and numbers below each date in row 6. What i want is to Sum the numbers below the dates in row 6 if the date in row 4 is with in 90 days before or after the date in cell A2.
Example......
The answer i should get is 4 since only 3 dates fall 90 days before or after todays date.
I have faced with a problem with Excel when I wanted to find the average for a stock price.
I have 2 columns:
1st Column: Dates from 1st May 2007 till 23th December 2008 (Rows:A3:A403)
2nd Column: Stock prices from 1st May 2007 till 23th December 2008 (Rows:B3:B403)
I have this formula:
=SUMIF(B1,">=C3:C5000",F3:F5000)
Cell B1 has a date
Every cell in column C has a combination of dates
Every cell in column F has a balance
I want to add those balances only if they are less than or equal to cell B1... w/my formula I get zero.
I have written the formula below:
=SUMIF($A$10:$A$77,"
Just getting into Excel and lookups want to SUM a 'Profit' colum if the date colum is less than TODAY - I basically have a set of data - 1 sheet per year where the dates are displayed dd/mm I want to achieve the SUM of the Profit Colum if the date is less than or equal to todays date (dd/mm only) for the year so we can compare year on year.
I just became a member of your forum, so please forgive me if I am not concise enough or take too long.
I imput the number of hours associated with week ending dates.
A C D
Date Hours OT
01/08/2006 6 2
03/12/2006 8
04/16/2006 3 1
I need to add up the hours for each quarter for Hours & OT
Jan-Mar
Apr-June etc
This is what I came up with, but it doesn't give me the correct value
= SUMIF(A3:A75,"<="&DATE(2006,03,31),C:C)
I have the following formula and it works.
=SUM(IF(AND((Transfers!B6="Labour"),(Transfers!C6="In")),Transfers!G6,""))
Basically the sheet 'transfers' has a column named type and one named in/out, the current formula I have does a logical test on both of these and then if they are both true takes the cost of it from a column named cost. This works fine for single rows. However on another sheet I am trying to use the above formula but there will sometimes be more than one entry for the same date on the sheet 'transfers' and all the same dates that meet the logical test's conditions need to display the sum of the cost on this other sheet.
I am trying to get a SUMIF formula to work where the following: - RANGE = Column N:N (These are all a list of dates) CRITERIA = Cell C20:D20 (These are the dates i want to look at) SUM_RANGE = Column P:P
Basically, I want to SUM all the numbers on Column P where the date in Column N falls between and including the dates in Cell C20 and D20
In attachement, I want to show in the YELLOW cells the SUM of Column P where the Date in Column N is between the Dates in column C and D.
I am trying to find a formula for column D on the PO Costs EOY sheet. My criteria is as follows:
1. Column b on PO Costs EOY= Column A on Fabric and accessories
2. The order date in Column A is equal or in between the dates on rows 3 and 4 in fabric or basket accessories
3. I do not want to include in the some anything before order date, ie, if the order date is 8/8, i only want to sum 8/9 and greater.
The order date will always be on the last day of the week. So the sum would start the follow week.
I am working on a report for work with the following formula:
=SUMIF(A5:G8,AND(between 1-1-13 and 1-31-13,"soft cost"),G5:G8)
my formula is "IF A5:G8 IS BETWEEN JANUARY 1st 2013 AND JANUARY 31st 2013 AND ALSO IF IT IS A SOFT COST THEN GIVE ME THE SUM OF THAT ROW"
Pretty much column A contains different dates and column C indicates whether a cost is a "hard cost" or a "soft cost". If the date is within the month of January AND if it is a soft cost, I need the dollar amount in column G summed-up (must meet both criteria - January and soft cost).
Im Trying to use a formula of countif or sumproduct
so the formula will read the range of cells from A2:A30 to see if the word Hydro is in any of those cells, then if the date range from Cell B2:B30 is from range =>Dec-01-2007 to =<Dec-31-2007, then it will count 1.
[Code] ........
But this formula doest count.
I've tried using a multiple if count if with arrays and sumproduct. I really want it to count the ammount of time the work hydro is used during the month on december .
I am trying to use a date range as a criteria in a SUMIF function. Below are the data and formula I am using.
Forecast
6
4
15
8
Week
1/12/2014
1/19/2014
1/26/2014
2/2/2014
Formula =SUMIF(G2:J2,">L1",G1:J1)
G1:J2 - raw data shown above. L1 = 2/2/2014. Desired result = 8. Result obtained with formula above = 0 how to make this work?
I am trying to sum multiple columns of data by a sumif based on a criteria in column C, the columns are weekly dated, and I wish to match columns by offset this initial column with a start date and end date and sum columns in between, I have been getting close but only returns one columns values?
SUMIF(FilterCol,$C17&I$9,(StartCol:EndCol))
FilterCol is column for criteria match
Start Col is name range - OFFSET(FilterCol,0,'Summary totals line groups'!$G$4,1,1) - End col similar, (G4 is a match date to find column ref)
I have a column of hours spent working on a particular task, but I only want to add the hours that fall within a two week reporting period.
Is it correct to use the SUMIF formula? If so how do I write the formula to include the date range desired? Would it go under 'criteria'?
I have data which is exported from my system which includes the job date and gross profit amount. I want to find the gross profit total for each day based on a matching date. However, the data exported includes the time in the date cell and Google Sheets won't match it. I'd like to avoid using a helper cell if at all possible.
You can see the formula here : [URL] ....
Formula is on the Q column.
I am trying to do a sumif off all dates that fall into a specific year. I know I can do it by either adding a column in either of the sources to get the translated data but I was wondering if I can get this to work by it recognizing the format within the formula only.
View 4 Replies View RelatedI'm currently using the below formula to calculate the values within a certain date range.
=SUMIFS(C2:C100,B2:B100,">=2014-06-27",B2:B100,"
The attached spreadsheet has a "master" workesheet in which I enter customer info, salesperson info, and date. The totals spreadsheet automatically calculates number of sales, contact value.
I need to modify the following formulas to only calculate the data within a date range shown in 2 cells.
=COUNTIF(Master!A1:A176,PayPeriod!A4)
=SUMPRODUCT(--(Master!A1:A176=Totals!A4),(Master!K1:K176))
=E4SUMPRODUCT(--(Master!A1:A176=Totals!A4),(Master!K1:K176))
Figuring out a SUMIF or SUMIFS formula which will clean up some weekly data. I am envisioning a SUMIF formula which looks at the client name in column A in a table and then it will search through the long list of data for all entries for that specific client on another sheet in column "A", for instance. It needs to take into consideration only the encounters which happened between the dates in the table for that client listed in column B & C. The sum will be the column next to the column with each client's name which has a procedure date in between the date criteria's from the table. I have attached an example to better illustrate.
SUMIF Example.xlsx
I have a report I am attempting to populate with data from a pivot table in another worksheet. Column A holds all the reference numbers (primary key), column B contains various start dates, and I want column C to contain all the payments made since the start date for each reference number.
The source data is a pivot table with Row = Reference number, column = transaction date, values = transaction amounts. This is an extremely large table, as I'm processing data from almost 1,200 cases, which each have around 20 payments spread over the last year, on completely random days. What I would like to do is build a formula in my report which looks up the records for the reference number from column A, and then adds up all the payments which have been made after the date in column B (and ignore any payments in the table which are before that date).
And to make things more complicated:
if an error is generated, it needs to return as 0, not #N/AThe report has the dates in UK format dd/mm/yyyy, but the pivot table has the dates in SQL format: yyyy-mm-ddThe pivot table is connected to a SQL database via ODBC and has to refresh every time it is opened.
=IF(ISERROR(VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE)),0,VLOOKUP(A2,'Transactions'!$A$2:$B$1194,2,FALSE))
I am trying to pull cell values similar to a SUMIF function (SUMIF(range,criteria,sum_range)). For example, in A1 I use a data list created from data elsewhere on the spreadsheet. In the data I created elsewhere, there are 2 columns being used. The 1st column is the information that is being used to create the list and the second column contains specific values (number or text). In the dropdown menu I select an available value (text or number) . When I have selected that value I would like cell A2 to show what the cell directly to the right of it shows from the data I have elsewhere in the spreadsheet as mentioned. I have tried the SUMIF function however it seems to exclude certain values (number or text) and I am not sure what else to use.
View 9 Replies View Related