Call all data in new workbook or in single sheet from different sheets (except 1 or 2 sheet) of workbook. i already use some macro to hide some data from sheets so i want only filtered data.
View 8 Replies
I have 2 sheets which validates data using vlookup.
Sheet1
Table 1ABResult1121232313
=VLOOKUP(A7,B:B,1,FALSE) is the formula in result1 column.
Sheet 2
Table 2DEResult21020102040203010#N/A
=VLOOKUP(F7,G:G,1,FALSE) is the formula in result2 column.
The basic idea of these vlookup is to check whether the data present in A or D column is present in B or E. If the data is there then it will be retrieved in "Result1" or "Result2" columns. If not then the result would return the value "#N/A".
What im trying to do is to copy the resultant data(from Result1, Result2) other than "#N/A" from individual sheets to a final consolidated sheet.
I have 30 and above sheets in a work book and like that I am having 5 such
books. The sheets are named as 201, 202, 203 ....etc as per the contents in
that particular sheets. (201, 202 .....are the P.O nos.). all the work
sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say
324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms
part of the name of the sheet) that sheet should appear for me.
I have multiple workbooks ( with unique names) under same folder. Each workbook has "Report-Corn" sheet.
I would like to copy cell "P15" from each (workbook-> report-corn -> P15) and paste to Master.xls workbook -> Sheet 1 one after another which is also located under same folder.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
Is it possible to have a single userform put data into two separate sheets within the same workbook.
I have a userform set up for entering client data into a quote register,with no problems ( sheet 1)
A1, A2, A3, A4, A5, A6, A7, A8, A9
What I would like is for the data to also go to sheet 2, where I have a form set up to print off for our technicians to take on site.
The problem will be that I would like the data A1, A2, A3, A4, A5, A6, A7, A8, A9 not to store on this sheet after it is printed, so the next set on entries , can be printed etc.etc
I'm loving these new formulas that i'm learning here and applying them to whatever sheets i come across to make my life easier at work...
So now i've created another worksheet, this one is to help my colleague who wastes atleast an hour everyday to generate a consolidated report of our bank accounts...
Now i've sorted out half of the report where he can give an overview of the position of cash flow on a daily basis.
Theres however 1 more addition i wanted to make to make this workbook absolutely perfect!
On sheet 2 (which is my consolidated report sheet) I want to add all the transactions that occur on a particular date from all the different bank accounts (Each account having a seperate worksheet)
I'm not sure if advanced filters can achieve this or not or even easier/short macros... Any tips/hints as to how i can achieve this would be awsome..
I've attached a sample workbook which has sheet1 for a bank account and sheet2 for report generation...
I want to add all the rows having "Clearing date" (column A) in Sheet1 to report date in Sheet2
..And this for all the account sheets i can add...
trying to copy data from multiple sheets to one single sheet. I am pretty sure this is possible. The problem I am running into is that the number of sheets at any given time is dynamic. The numbering of the sheets is from 000 to 999 (they must be a three-digit code). The other issue I am having is I only want to copy the rows in each sheet that have an "x" in column "A". Also, the row in which the first "x" occurs can differ from sheet to sheet. I have attached a copy of the spreadsheet that indicates how the spreadsheet is layed out.
View 13 Replies View RelatedI recieve a daily spreadsheet with ~25,000 rows of data and is 4 columns wide. Each day I need to break the data equally up into 19 or 20 different sheets within the same workbook. This is very time consuming as I need to copy the first ~1,000 rows and paste it into the first sheet, then I need to take the next ~1,000 rows and paste it into the second sheet, and so on.
I have attached a small example with desired output. In my example, the raw data file contains 19 records. For these 19 records, I need to distribute the records evenly between 5 individual sheets. In this case, each sheet will contain 4 records or less.
The worksheet is formatted as follows: It contains data in columns A-L. I want to breakdown the data further into sheets according to the data that is found in column G. As an example, say I have 1,000 rows of data and in column G there are a number of different branch numbers in each row. So there may be 250 rows with branch 450, another 250 rows with branch 360, another 200 rows with branch 777, and finally 200 rows with branch 888. In this case I want to create 4 new sheets (450, 360, 777, and 888) and copy only the data in the main sheet that corresponds to same branch.
Actions would be as follows:
copy 250 rows to tab "450"
copy 250 rows to tab "360"
copy 200 rows to tab "777"
copy 300 rows to tab "888"
Any comments are much appreciate. I have attached a data sample along with desired output, if needed. One note: the data comes in each day as one single sheet of data and the number of branches varies day-to-day, as such, code would need to create new sheets for each branch found.
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
Following is my query:
There are two workbooks , Workbook1 and Workbook2
Workbook1 has only 1 sheet (Sheet name is Final) with multiple rows Tiger,Lion,Goat etc..
Workbook2 has multiple sheets (Tiger,Lion,Goat .... so on)
Each sheet Tiger, Lion, Goat has different no of rows but same no.of coloums.
I want to copy the data from all the sheets in Workbook2 to one sheet Workbook1
ie., once i execute my macro the final output in Workbook1 should contain Tiger under that all the rows from sheet tiger(Workbook2),Goat under that all the rows from sheet Goat(Workbook2) ,Lion under that all the rows from sheet Lion(Workbook2).
Here rows should be inserted in Workbook1 and in these inserted rows we should copy data from respective sheets of Workbook2
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
I need to import the data from a specific sheet (same named sheet on all closed workbooks) to a sheet in an open workbook. All the columns are identical in every workbook but the number of rows is variable, so the data from each subsequent workbook must be appended to the end of the current data.
Whenever a button is pressed, this macro will clear the sheet, then import the data starting in A3. The workbooks are in different folders but they all have the same name, so some sort of explorer window will probably be needed to actually select each file.
what syntax shall I put in for more than one sheet for workbook calling sheets for due date
View 2 Replies View RelatedThe attached excel file arrivals page and departures page Serial number to compare current on the data up-to-date page, I want to copy.
up-to-date on the "F" column is copied to the page on which you need to print.
computer just doesn't have the horsepower to run all of the sheets and the formulas and put them together on one sheet in the same workbook.
I was wondering if it would be possible to take the identically arranged sheets from one book and paste the VALUES over to One page in another book.
I'm guessing you'd need to know the directory of the workbook and the title?
Below is the macro i run to compile in to one page in same workbook: (Summary3 is an arbitrary name for the new page, HEADERS is the name of the page that holds the headers for all of the categories, 2014 URL, RAP and DB_Template are the three sheets that I don't want to copy in to this new page)
The headers are in each sheet from B2:DL2 and the data would be from B3:DL75.
I am looking for an update to the following macro that would paste all of the VALUES from each of these sheets in to a new workbook on a single page.
Sub CopyAll()
Dim ws As Worksheet
Sheets.Add.Name = "Summary3"
Sheets("Summary3").rows(1).value = Sheets("Headers").rows(1).value
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If ws.Name <> "2014 URL" And ws.Name <> "RAP" And ws.Name <> "DB_Template" And ws.Name <> "Summary" Then
Range("B2:DL75").Copy Sheets("Summary3").Range("B" & Rows.count).End(3)(2)
End If
Next ws
End Sub
I am trying to set up a new workbook for my home accounting, this will consist of a seperate sheet for each item which will store the monthly payment data and a master data input sheet, where i intend to select the month and year from a drop down list, then input the amount in each entry for that month. hopefully i will then be able to hit enter and all data will be sent to its corresponding position in its relevent sheet.
View 6 Replies View RelatedWhat I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
My excel database has a master sheet where all data is included. It consists of 8 columns with two rows of headers (1st row: Sheet title, 2nd row: Categories for the columns like, name, salary, emp. start date, Boro,emp. number...etc.
Master sheet aside, I have 12 other sheets in the same workbook (Feb-Jan), we run a fiscal year, not calender. The data that is included in the master sheet needs to copy over to the corresponding worksheet sheet month as long as the date in the emp. start date falls with the month range. For example, if my master sheet has data in rows 4,5,7,9,19,23,101...600 and the emp. start date is in the range of from June 1st, 20xx through June 31st, 20xx then all the data in that row should copy over to the next available row in the month of June's worksheet. The same should happen the months of Feb - Jan.
I'm trying to find a way to save a single sheet of an excel workbook and in the same process delete all vba code and shapes from the new single sheet workbook. I was looking around and found this code which does save only the single sheet to a new one sheet workbook but doesn't delete the vba and shape that I have used to assign macros to in the original.
Code:
Sub SaveSheetAsNewBook()
Dim wb As Workbook
Dim InitFileName As String
Dim fileSaveName As String
Dim wshape As Shape
InitFileName = ThisWorkbook.Path & Format(Date, "mm.dd.yy")
[code]....
I am trying to modify the macro that I have put together so that it executes only specific worksheets within a single workbook. In this example, I would like the macro to update worksheets A, B, and C but I have more sheets in my actual file. I am only able to get the macro to work on the active sheet. Attached is my workbook.
VB:
Sub HideColumns()
Application.ScreenUpdating = False
Dim myRange As Range
For Each myRange In Range("B5:M5")
[Code] .....
I am trying to combine sheets from various workbooks into a single file named "Combine". The goal is to have the sheets in Combine indicating their origin.
For example, with:
"File_1" having 2 sheets, "Sheet1" and "Sheet2"
"File_2" having 1 sheet, "Sheet1"
the goal is to have a file "Combine-forum" with the sheets named:
"Sheet1(File_1)", "Sheet2(File_1)", "Sheet1(File_2)"
I have grabbed pieces of code from various sources and read on the forums, but the result is different from what I want; I don't succeed to add the file name to the sheet name. Instead of the file name, the second part of the sheet name appears to be the order in which the workbook have been opened.
To be clearer, what I get is:
"Sheet1(1)", "Sheet2(1)", "Sheet1(2)"
Attachments: To_be_combined.zip 3 compressed files to be combined. I suggest to copy them in C:TEMP and to copy this path in the InputBox (see below). Combine-forum.xlsm Best working file that I have been able to create
I have a work book with 3 sheets. Sheet 1 is the main sheet and sheets 2 and 3 will use (I hope vlookup) to update 3 columns from info in sheet 1. my attempt at a vlookup call in sheet 2 is: =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my understanding is that: - $b3 is the cell in sheet 2 that will be updated as a result of the vlookup call. - [master_AoJ_2.xls]Sheet1!$B$3;$B$65 refers to range $B$3:$B$65 on sheet1 of master_AoJ_2. it does not work... infact I get nothing at all. when I type the call into cell $b3 of sheet2 excel thinks it is stariaght text. this is how I coded the function call =VLOOKUP($b3,[master_AoJ_2.xls]Sheet1!$B$3;$B$65,false)
my macro comes up with an error on the Consolidate line that says 'Cannot add duplicate source reference'. I have a workbook with a variable number of tabs and I want to consolidate-sum (not copy and paste) the data from the various sheets onto a summary sheet within the same workbook. I'm at the point where it all works fine until it hits Consolidate.
Option Explicit
Sub ConsolidateExport()
'
' ConsolidateExport Macro
[Code]....
I am trying to create a Macro for taking information from a master sheet "sheet1" and dumping it into another worksheet based on a single variable in "sheet1". I have attached the excel workbook for reference. In detail, I would like to pull all of the rows where cell "F" in "sheet1" equals "1" and dump them into the new sheet titled "Dept1" with the same headings. The same for all rows where cell "F" in "sheet1" equals "2" to dump into the new sheet titled "Dept2".
View 6 Replies View RelatedI have 2 sheets with a list of account numbers and values on each (Column A = AccountNumber, Column B = Amount)
I want to combine this on Sheet3 which should include all accounts on the other 2 sheets. Some AccountNumbers only exist on on one of the sheets.
Sheet1
A..100
C..200
E..400
Sheet2
A..200
B..100
D..200
Sheet3
A..100..200
B.....0..100
C..200..0
D.....0..200
E..400..0
I have a spreadsheet that has approx 10 different sheets (tabs at the bottom). I want to write a routine that will take one of the sheets, copy it to a new workbook, and email the newly created workbook using Outlook.
I've entered this question once before and got some suggestions that seemed to work for a while. Then it became hit and miss as to whether it worked or not. Now I'm geting a "Can't create object" error everytime. I want to break this one sheet out and send only it because I don't want to send the entire workbook.
I have an original workbook that I use daily stored in a folder called 'Live'. I also have this same workbook saved in a different folder call 'In Progress' because I am constantly improving and making changes to it. While I'm in the revision mode, I keep it in this folder. Once I've completed my revisions, I move it to the folder where the live workbook is located and replace the old version. Therefore, I have two copies of the workbook at all times. The name of the workbook in both folders is the same (IRQT)
I have a macro in this workbook that will allow you to save a copy of the workbook in a folder called IRQTArchive. The macro will create the folder if it doesn't exist, then store a copy of the workbook using a name in a cell. After that is complete it renames the workbook back to the original name (IRQT).
This macro works perfect in my live version, but when I execute the macro in the 'In Progress' version, I get a Compile error: Sub or Function not Defined when it reads the dirExists command in the first line of code. The code in both sheets is identical. Here are the first few lines of code. The command dirExists is highlited in yellow when it errors out.
