Ive put some sheet code together that i need copied to 12 sheets (jan to December) in 24 workbooks (each workbook has trhe same sheet names). I dont want to alter the actual content of the Excel sheets, I just need to copy VB code from a template (in VB editor) to the 12 sheets in each of the workbooks. Is this possible to do with VB or do i need some other utility since Im using the VB editor....
View 9 RepliesI have 6 spreadsheets all within the same folder, these are pretty much identical (rows, colums, sheets within them) apart from the names of the files.
I then have a master spreadsheet within the same folder where I want to combine all the data, from all the sheets within each book (if that makes sense!) apart from the data on the last sheet within each book as this is the reference data, onto one sheet within this master file. If possible I only want to copy rows accross which have complete data too.
So: (names not correct)
From book1.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
From book2.xls copy all data on sheets (sheet1, sheet2 etc) except last sheet
combine onto masterfile.xls on sheet1.
I have searched on here and can only find how to do it with the first sheet in each workbook, not looping through all the sheets in each book. Please see below.
I have eight sheets that have lists of questions in, which I want to copy across to a results sheet if the answer to a question is 'Yes'. Each question takes up rows B:H inclusive, and I would want to copy them to rows B:H in the results sheet. The "Yes" value will be found in column F of each row.
How can I set up a macro to copy the entire rows (without formatting) into a results sheet properly? I've tried every solution I can find but always hit a roadblock somewhere.
Ideally I would like to have a 'populate' button on the results sheet that would find every question that was answered 'yes' across the eight survey sheets and import them into results sheet.
I'm trying to copy rows from one workbook that is exported from access to multiple worksheets in multiple workbooks. I used a macro I found here from JBeaucaire that will copy the data for me but it over writes the information I have in rows 1-3 and also the rows below, 28-35.
Is there a way to copy the data without loosing the information in the first three rows and the rows below where the data goes?
I use a code to work on all the sheets across all the files. But now I want the code work only on sheet named Paid across all the files.
Sub PP()
Dim wb As Workbook
Dim ws As Worksheet
Dim varWBnames As Variant
Dim varItem As Variant
varWBnames = Array("Book4.xls", "Book5.xls", "Book6.xls")
For Each varItem In varWBnames
Set wb = Workbooks(varItem)
For Each ws In wb.Worksheets
ws.Activate
ws.Range("A1").Formula = "=A2+A3"
Next ws
Next varItem
End Sub
I have one Excell Book with two work sheets. The 1st sheet (Sheet Name : Data ) contains the data... and in the 2nd sheet (Sheet Name : Rekey) i have a specific form in Rekey sheet and some data in Data sheet. Now i have to copy Rekey sheet into multiple times .... with different sheet names... and the sheet name are in Data sheet from cell A2 to end.....
For e.g. in Data Sheet cell A2 contins work1 and cell A3 contains work2 and A4 contains work3..... and so on....
Rekey sheet contains some form....
I need to paste Rekey sheet multiple times with sheet name work1, work2, work3..... and so on....
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
I am trying to use the SUM IF Array formula to sum a group of numbers that fall under a heading of reference numbers over several sheets of data. For example purposes lets say my spreadsheet looks something like the below.
A
B
C
D
E
1
2600000248391
2600000393805
[code]......
The first two digits of the heading numbers are the criteria I am trying to use to separate and sum the data. For example I need to sum the value of the data below headings that falls between 1400000000000 and 1499999999999.
For the example above I used the below formula for the current Sheet and it works fine.
{=SUM(IF(A1:E1>="1400000000000",IF(A1:E1="1400000000000",IF(Sheet1!A1:E1,Sheet2!A1:E1
How do I get a function to check cells on multiple work sheets.
For example this function searches for the word "hello" in cells, A1 to A50 and then adds up the number in the corresponding cells where "hello" is found from C1 to C50:
=SUMIF($A$1:$A$50,"=hello",$C$1:$C$50)
Two questions:
01) How do I search the same cells in two further work sheet, "Sheet2" & "Sheet3"?
02) Is there a way to search every cell in an entire work sheet?
I have a folder on a public drive. (\CFDIVIX1PublicPurchasing2009)
This folder contains multiple sub-folders (the sub folders are vendors which I purchase merchandise from) each sub-folder has 1 .xls file in it. Each file has 1 sheet containing all the information I need to retrieve.
Each one of these files has the same header information in cells A1 through I2 so I manually place that when I create this new workbook prior to inserting the macro. Each work sheet has a different # of rows depending on the number of items I buy from that particular vendor but I feel safe saying it never exceeds 250 rows per worksheet.
What I need
For the macro to pull up the first work sheet and pull out the data from cells A3 through I250 and place that data into my new work sheet in the same format. Then I want the code to move on to the next worksheet and pull out the A3 through I250 and place that data in the new worksheet directly below the last row of data that was pulled in. (Also it would be great if the code ignored blank values. Like if the first work sheet it pulled data from only had data in the first 10 rows I don’t want 240 rows of blank rows before the next set of data)
I hope that running this macro will accomplish transferring all of my data from these multiple sheets into a single work sheet containing all of the pricing for all of my vendors. Once I have this I can place a second sheet on the workbook and use a formula to pull out pricing information that I need on a per basis without having to search through 50 vendors to find who it comes from. I don’t control the vendor work sheets that I want to extract data from so I need to use the macro to run it weekly incase my purchasing dept makes changes.
Basically, what I am trying to do is my workbook has 12 sheets, 1 for each month. In cell A7 on the first sheet (Jan) I would like to enter 01-01-2009 and then it add a month on each of the sheets. e.g. 01-02-2009 01-03-2009 and so forth. I know I can manually put in the first of the month on each of the sheets, just wondering if it can be automated.
View 3 Replies View RelatedIm looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.
All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.
I have a large workbook which has about 15 sheets. About half of these are template sheets which are copied multiple times within this workbook. The workbook is very large and can't be posted. I would like to hear from anyone who can give me any direction to look in given the following symptoms. The problem is that VBA code stops executing and gives a 1004 Error. *The problem is stable and reproduceable.
*It occurs exactly the same across three different computers with varying versions of Excel and memory.
*The problem is persistant beyond VBA. By that I mean if I stop the debugger and try to manually copy the active sheet, the screen flashes but the sheet is not copied. Therefore I think the 1004 error is a symptom rather than a cause
*From scratch, I get to copy 43 times before I get the error.
*If I then save the workbook and re-open (don't need to close Excel) I then get to copy another 27 sheets.................................
I'm working in one workbook with 2 sheets.
sheet 1 have simple values, for example
cell A1:5
Cell A3: 10
Cell A5:15
Cell A7:20
Cell A9:25
Cell A11:30
Cell A13:35
Cell A15:40
In sheet 2 i have the following formulas:
Sheet 2 Cell A1: =Sheet1!A1+Sheet1!A3
Sheet 2 Cell A2: =Sheet1!A5+Sheet1!A7
I need to respect this sequence when copying these 2 formulas in the same sheet 2 cell A3, however when I do that I get the following formula: =Sheet1!A3+Sheet1!A5. While i need it to sum up A9 and A11. i.e respect the order of the first 2 formulas.
There is a Microsoft VBA bug currently outstanding where if your VBA replicates a sheet too many times, it throws a run-time error. I read MS' statement that, to get around this problem, what one can do is to save and close the file, and re-open the file once in a while.
Doing this certainly helped, where it used to crash after copying only a few times and now it goes on until 40 ~ 50 times. But it still crashes. Has anybody been able to get around this problem? Currently I am having VBA save, close and re-open the file every 7 or 8 times or so...
How do I write a vb macro that copies everything from multiple files, including sheets within files, and puts them into one master file. Here's what I have so far. I used a script from gnaga that worked great but it didn't copy seperate sheets. If you can help me out, I would greatly appreciate it.
Sub MergeSheets()
Dim SrcBook As Workbook
Dim fso As Object, f As Object, ff As Object, f1 As Object
Application.ScreenUpdating = False
Set fso = CreateObject("Scripting.FileSystemObject")
Set f = fso.Getfolder("C:Temp")
Set ff = f.Files
For Each f1 In ff..........
Set
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
Firstly... using VBA i'd like to disable any save function to everyone other then me and a colleague on a spreadsheet (The one below).... Is it possible that just the two of us will have the ability to save and no other user?
Secondly... On opening one work book... in this case "Productivity Test" i'd like it to simultaneously open "Productivity Test Back End" both saved in P:MI TeamNew Prod with the back end remaining locked totally.
The reason behind this is these two spread sheet's are linked via sums, productivity test uses the back end as a kind of data source so i'd like "Productivity Test Back End" locked so they cannot see it/amend it..
Maybe i could use a bit of code that updates the link everytime something is used as opposed to having the back end open at all...? What do you think?
The last thing, i have alot of macros that run quickly on my PC, if my manager opens productivity test and uses the spread sheet it appears to run alot slower.
There are alot of tables in Productivity Test that are hidden and only appear when needed while everything else remains hidden. The example below is one buttons code..
ub Selectdsrtablenew()
'Select the correct table for users to view DSR detail'
Application.ScreenUpdating = False
Rows("23").Select
Selection.EntireRow.Hidden = False
Rows("26").Select
Selection.EntireRow.Hidden = False
Rows("36").Select
Selection.EntireRow.Hidden = True
Rows("47").Select
Is there any way of stream lining the code here to make it smoother as it appears quite a few times in the report for different buttons.. Maybe defining table names?
I have a work sheet with about 35,000 lines of data. Every day I have to sort the list by product category (I use auto filter to separate) and then copy the results into a new worksheet, there are about 300 product catagories. I'm new to macros but I'm wondering if there is a macro that can automate this process.
View 6 Replies View RelatedI have created a userform template and is working fine, the problem is the users are not able to minimize the template nor open any other excel files.
How to allow the template to open any other excel files or macro enabled files and also to minimize the windows.
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
I have a workbook called summary with a sheet called "detail" I have 4 workbooks Called week 1, week 2, week 3 and week 4. All the week workbooks have a sheet called Summary. I need to import the summary sheets from each week workbook into the the detail sheet. All workbooks are in the same folder. I need to only copy columns A,D,F,G.
If someone can post code or point me towards a thread I can figure what changes need to be made. I am getting better but slowly!
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................