How in excel do I get a no. to appear in a column dependant on a reference in a different cell. For example If i type March in a cell I want the number 1 to appear in the March column of a table.?
View 9 RepliesI have two sections to this spreadsheet: 1) the entity section; 2) the order section.
I have created a macro to insert rows in both these sections. The macro appears to work fine for the first section but not for the second section. The problem I cannot solve is in respect of cells D9:D10. The macro is as follows:
Not sure what formula to use for this set-up:
Col1 - Name_Last
Col2 - Name_First
Col3 - Ref_Name
The desired effect is under column 3, you have "Name_First Name_Last". Attached sample file.
I am working in excel. I have a column with about 30 rows. After computation only a particular row will have an alpha-numeric value, this will be any one row never more than one, all the remaining rows will be completely blank.
My question is, how do I represent this alphanumeric value which can come in any row to a particular cell.
1st post so hope that title isn't too vague.
Using VBA, I have a macro that will find a column based on a week number and add in a new column.
It will then offset the ActiveCell down one.
I now need the macro to SUM all values in that row to the left of the ActiveCell.
My original thought was to use:
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlToLeft)).Select
Unfortunately, there are gaps in the data field, blank cells that should count as zero value.
How can I highlight all cells to the left, from whichever column the active cell is in, through to column B?
I want vba code to pull data from two sheet in workbook, code has to pull all data from first sheet , then pull data from second sheet and paste some particular column only below first column sheet
e.g i pull data from two sheet(ONSITE&CCI)
SHEET-1ONSITE CONTAINS HAVE 57 COLUMN
SHEET-2 CCI CONTAINS ONLY 19 COLUMN
FIRST I PULL 57 COLUMN DATA ONCE FINISH MOVE TO SECOND SHEET CCI CONTAINS 19 COLUMN BUT ITS HAS TO PASTE DATA BELOW DATA OF ONSITE TO PARTICULAR ASSIGNED COLUMN'S ONLY BUT COLUMN NAMES IN BOTH SHEET IS TOTALLY DIFFERENT
I have Data in Column a There in not demarcation between two Groups of Data
I want it Insert a Row between the two Groups of data.
Each group of Data end with a cell has "Employee" in it
The Row is to be inserted after the cell having “employee”
I have data in 4 columns, A, B, C, D. Each column has 5 rows of data. I want to write a macro to automatically insert 2 columns, after each column in original dataset.
View 8 Replies View RelatedIs there a quick way to copying formula's from one column to every other column? I am using about 1000 columns.
View 6 Replies View Relatedsimple little procedure to insert columns on two sheets and call each by the same name. Macro runs off a command button and inserts a column at E:E and gives the user an input box with which to name the inserted columns.
Code: ...
the Ruler across the top that allows you to adjust the column widths (A B C D etc). Is it possible to insert another Ruler, further down the same page, to allow you to adjust the column width differently. if so how. On Excel 2007
View 2 Replies View RelatedSuppose I have done a spreadsheet of,say 100 entries in alphabetical order in a column and I discover that I have missed 6. Is it possible to move the existing part from where I missed below this to make room for more entries without losing any of the entries?
View 3 Replies View Relatedmacro for inserting rows and column in Excel.
View 1 Replies View RelatedI have a column of an undefined number of rows where I need to add item numbers from 1 to however many items there are, starting from A9 downwards.
The last 3 used rows on the sheet contain signatures etc so it should not number the bottom 3 rows.
pretty sure its fairly simple code but i dont have anything similar from previous files that i can re-use to do this :p
just needs a simple
count how many rows are blank from A9 downwards (to say A200)
for num=1 to count do
Cell range(A(9+num) = num
end
i just dont know the code well enough to write it and make it work :p
I have a workbook with 2 worksheets. 1 Worksheet contains a data table and another table contains a form
Worksheet 1 (Data)
[A] [B] [C]
1) [Material #] [Batch #] [Destruct Form #]
2) 10 100A 1A
3) 10 101A
4) 20 200A
5) 30 300A 2A
6) 30 301A
Worksheet 2 (Form)
[A] [B]
1) [Destruct Form #] [3A]
2)
3) [Material #] [Batch #]
4) [10] [101A]
5) [20] [200A]
I am looking to create a macro which, when executed, will:
1) search sheet 1 column B for any instances where a "batch #" from sheet 2 column B appears
2) add in the corresponding "Destruct Form #" from Sheet 2 Cell B1 into sheet 1 column b
Therefore after the Macro is run, sheet 1 will look like this:
Worksheet 1 (Data)
[A] [B] [C]
1) [Material #] [Batch #] [Destruct Form #]
2) 10 100A 1A
3) 10 101A 3A
4) 20 200A 3A
5) 30 300A 2A
6) 30 301A
This may sound trivial, but how do you insert a column to the right of the current selection?
If I do Selection.EntireColumn.Insert that inserts a column to the left. Anyone know how to do this?
I have a long list of inventory parts and there can be additions or deletions at any time. Currently the inventory is determined using formulas from other worksheets and this uses formulas. If I have a user insert a row to create a part in inventory, is there a way to make the formulas automatically be created in the cells within the row?
View 4 Replies View RelatedI'm a novice in VB and can't work out how to solve the following problem:
I have imported NMEA-data in text format from a GPS into Excel. This data is acquired in real-time at 10Hz, which borders what the GPS in capable of calculating. As a result the data isn't quite reliable enough - there are strings missing and some lines have been skipped by the GPS. This is a typical example of what sometimes happens: ...
Whenever I insert a column in Excel 2010 it takes the formatting from the Column to the left. I want to insert a Column without formatting. Just a blank column.
View 4 Replies View RelatedI have the following sheet with reg hours and ot hours. I need to insert a column that sums these two items. I used the macro recorder and it only works when the same amount of ID's or less. If there are more ID's it does not sum the remaining ID's. What it currently looks like:.........
View 3 Replies View RelatedI m just looking out for some code where i can restrict the user from changing or inserting a value in a particular column in excel
View 9 Replies View RelatedI have a list of names in the A column of the sheet. I wish to use the input string, a new name, of a vba box to insert into the column of existing names in alphabetical order by inserting an entire row, which I suspect will be the case anyway. Also 'Return' key doesn't seem to be inserting a CR on the page that I typed this request upon.
View 5 Replies View RelatedI am operating Excel for Mac 2011 version 14.4.2
I have a list of 1500 addresses in a column, something like, 5VistaTerrace, and I need to insert a space between the number and each of the words so that it reads 5 Vista Terrace in the cell.
All of the addresses are different, some with 4 or 5 words like 5ABrownBayCourt... that particular one I would want to read 5A Brown Bay Court in the end.
Is there a formula or excel trick I can perform to save me the time of manually adding the spaces?
I want to insert a formula that is tied to a specific column. I know how to do formulas and have a slight understanding of macros. Can I insert the formula as part of a larger macro?
View 3 Replies View RelatedWhen I try to insert a row, Excel displays the warning "cannot shift nonblank cells off the worksheet". I understand what the warning means but there are no nonblank cells at the bottom of my worksheet! Just to be sure, I have selected the bottom-most rows, cleared them, deleted them, and everything else I can think of. The warning still appears.
View 3 Replies View RelatedI am working on formatting a spreadsheet report where the values will change in column A. Here is what I would like to do via a Macro. Compare the cells in column A (e.g., compare A2 to A3, compare A3 to A4, and so on). If the values between the two cells in column A are different, insert three blank rows and set the active cell to the next cell following the blank lines. Example:
if cell A5 is different from A6, insert three blank rows below row 5 and new active cell is now A9 and the comparison would start again. I have been trying to code the macro for this but with no success. Here is the macro I have been working on.
Sub Macro1()
Const NumRow As Integer = 3
Dim StartCell As Range
Dim RowNR, NewCnt As Long
Dim RowCount As Long
Dim Count As Long
Dim intRow As Integer
Dim bFmtComplete As Boolean
RowCount = Application.WorksheetFunction.CountA _
(Range("A1", Range("A" & Rows.Count).End(xlUp)))
bFmtComplete = False
RowNR = 2
Range("A1:J1").Select
' Rows("1:1").Select
Selection.Copy................
The below code was working absolutely fine yesterday but since this morning I am getting an error: "Insert method of range class failed" at the following line:
[Code].....
Here is the complete code.
[Code].....
I have googled it and didn't find any workable solution. My DataEntry sheet is unprotected.
search an entire drive from the root directory and down into all subfolders and copy all files matching various file types below to another drive into organized folders named for the file type. (for an example any .xls files in F: copy to G:xls .xls files) and also create an index in one excel file showing all the files in alphabetic order with its original path.
bmp
txt
xls
I'm using Excel 2007 and s/s is 325501 rows deep. It consists of series of ranges between 4 and 30 rows deep.
What I want to do is locate the next appearance of a name and copy its accompanying number.
Doing this manully is not feasible, given the large size of the s/s .
I enclose a small attachment showing what I am trying to achieve. For those who don't like opening attachments the wording in it is :
The desired objective is to place in column Q the next appearing number in column L of the name in column C.
The VLOOKUP formula in column Q presents the desired number but (problem!) presents a zero when next appearance = blank.
When this happens I want the formula/code to repeatedly lookup the next appearance until it finds a number.
Examples of where next numbers appear are given here in column R.
In AA1 i input the date based on the lookup.
I want to filter Column 7 (Col G) to what ever is in AA1.
Say i had the date 02/05/2012. My filtered range should only be dated 02/05/2012 but its not filtering to those dates
Code:
With Sheets("UNPRODUCTIVE")
With .Range("AA1")
.Formula = "=IFERROR(LOOKUP(2,1/(TEMPLATE!S12:S40""""),TEMPLATE!B12:B40),"""")"
.Value = .Value
.NumberFormat = "DD/MM/YYYY"
End With
On Error Resume Next
.Range("A1:T1").AutoFilter Field:=7, Criteria1:=.Range("AA1").Value 'filter with only the dates the macro is run for
On Error GoTo 0
End With