how I can list 3 different values to a list of list of 3 in a combo box, is.
combo box
select high = 35
select middle 30
select low = 25
I have the names in the box I just need it to add a value (which I have listed 1 in each separate cells) to each selection
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
View 5 Replies View RelatedNeed Help in resolving the following issue:
Update a list using a Combo Box works fine when the list is on the same worksheet but when the list is on a different Worksheet it does not work.
Is this achievable? I guess so! but was wondering how to do it.
e.g: if my range defined name called let us say "SP" with a range AD1:AD60 in Sheet1 when I use a combo box the Listfillrange will contain: SP
When inserting a new entry using the combobox it works fine but when the same defined name range points to a different Worksheet example: Sheet2 then the update does not work although the ListFillRange contains the same Range name: SP.
How do I set a ComboBox list to read values from an array? I tried the following in VBA, but it didn't work....
ComboBox1.List = Array("January", "February", "March", “April”, “May”, “June”, “July”, “August”, “September”, “October”, “November”, “December”)
I'm trying to use data validation to restrict the user to only selecting values in a list which I create. Right now, the list is a named range. I'd like to get rid of the range and just use a named list. I create a name using the following as my list.
Insert > Name > Create
Name: Fruit
Refers to:
banana,apple,orange
When I try to use the name Fruit in my data validation, I get the message "The List Source must be a delimited list, or a reference to single row or column." I thought my name "fruit" was a delimited list.
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant
Dim row As Range
Dim elements() As String
[Code]....
Is it possible to use the Combobox ListFillRange to list values from two groups of cells? For example, in column 'A', I have the values, 1,2,3; and in Column 'B', I have the values, A, B, C. I want to list the values in column 'A' along with the value of say, B, in Column 'B'.
combobox.listfillrange = "Sheet1!A1:A3" < ---- how to include value B from column B in this list? Or, how to get value A from column B?
I am currently trying to add some functionality to an Excel workbook and I have a combo box that I am unable to get the values to populate. On the same worksheet I have a command button. Here is the code I am using to attempt to populate the combo box:
Private Sub cmdSendSave_Click()
Call SendSave
End Sub
Private Sub bxLocation_Change()
With bxLocation
.AddItem "Mt. Hope"
.AddItem "Summersville"
.AddItem "Huntington"
.AddItem "Pulaski"
.AddItem "Coastal Bend"
.AddItem "Odessa"
.AddItem "Wheeling"
.AddItem "Hollywood"
End With
End Sub
how to list values from multiple columns in a dropdown list based on lookup value of 1st column as below.
This is how the table looks like.
Product MOLD1 MOLD2 MOLD3
4" AB1 AB2 AB3
6" ZA2 zd4 -
This is how the dropdown list should look like for Product 4"
ab1
ab2
ab3
I have two lists in the same workbook:
List 1) Contains customer contact information, including an account number. These account numbers may be duplicated in the list.
List 2) Contains account numbers of customers who wish to be removed from the first list.
I need to remove the rows from the customers list (List 2) where the account numbers match, and also copy those to another list for review. So far, I can manually choose and run some code to remove one particular account number only (eg 123):
Set FoundCell = Range("A:A"). Find(What:="123")
'Locate information to remove
Do Until FoundCell Is Nothing
FoundCell.EntireRow.Copy
Sheets(" Deleted List").Select
'ActiveSheet.Next.Select
Range("A1").Select
Selection.End(xlDown).Select
Selection.End(xlDown).Select
Selection.End(xlUp).Select
ActiveCell.Offset(1, 0).Select..................
I have two worksheets, one which contains a list of workstation numbers, and another which contains all of the workstation numbers and additional information on the workstations in the company.
I want to remove all workstation numbers and their information which are not present on the first list from the second list.
In the first w.orksheet each workstation number is in a seperate row, and in column one (seperate cells).
In the second worksheet, each workstation number and its corresponding information is on the same row, and each different workstation is on a seperate row with its information.
I'm trying to create a drop down list which returns values based on what has been selected in the previous drop down list in the adjacent cell, e.g. if 'Apples' is selected in the previous cell then you should only be able to select from 'Gala, Granny Smith', or if 'Oranges' is selected you should only be able to select 'Seville, Blood Orange'. Is there a formula which would do this, or can I use a pivot table somehow? I'm totally stumped.
View 2 Replies View RelatedI have an excel spreadsheet that is several thousand entries long. There are cases in which duplicate entries will spring up on that list.
What I want to do is come up with a formula that will find the first duplicate entry in that list and then display that entry in cell on another worksheet. If it was at all possible, I would also like to have the row that the duplicate entry is contained on display as well, in a different cell of course.
I do not want to highlight them using conditional formatting since I have used that to perform other tasks on that sheet and that wouldn't display the entries in a different cell for me, and I would prefer not to use a macro to perform this function it that was at all avoidable.
I need to have a drop down list which displays a different set of values depending upon the value selected by a previous drop down list. ie. (drop down box 1)= x, y, z. (drop down box 2)= either x1, x2, x3, or y1, y2, y3, or z1, z2, z3. I can produce a single drop down box thats not a problem but linking several drop down boxes is beyond me .
View 4 Replies View RelatedHow can i Loop through a combobox's values and compare to a string value and then set the listindex of the combobox to that value?
View 5 Replies View RelatedSheet2 contains various data, including one column of dates.
What I would like to do is populate Sheet1 with functions that search Sheet2 for date values between two separate date values on Sheet1 (cells F1 and G1). When a match is found on Sheet2, row contents from Sheet2 should populate on Sheet1.
In addition, I would like the functions only to match listings in which the value in column E on Sheet2 is greater than zero.
I have attached a sample workbook that illustrates the structure of the worksheets and the desired results. Looking forward to finding a good solution.
I have 2 combobox in userform. Both the comboboxes have the same list down value and I have applied as follows
VB:
combobox1.value = "Transport"
combobox1.value = "Paper"
combobox1.value = "Pencil"
Like this I have long list
In the combobox2 same list has been applied
Is there a way in which by one command the list is applicable to both the comboboxes, that would save me on the length of VBA.
I would like to add a combobox and would like to add/delete items to the list box.
View 9 Replies View RelatedI am trying to filter a list for a ComboBox using VB.
I have the following
Defined Name 'MemMapSel'
1stCol 2ndCol 3rdCol 4thCol 5thCol
Alarms a BOOL 2001 4000
Commands i BOOL 4001 5000
Status s INT 7001 8000
Free x DINT 9001 10000
etc
etc
I am using a combobox to select which row i require and am mapping the 4thCol to a cell
At present the property 'ListFillRange' is set to 'MemMapSel' displaying all 5 columns and bounding column 4 as the value
What i really need is to Filter this list, so that the combobox only displays the BOOL entries in the 3rdCol, or the INT, etc
I think i can use the Select function to do this, but i am not sure how to go about it.
Trying to get the list from a combobox in an online form. I'm doing this as a check to make sure what I need to be there is there. Then the macro will select what I need and move on. If not found in the list, then it will move on...
So I start thinking about it and I'm not quite sure how to do that in Forms. Does ListIndex get me there?
I'm unable to give the site because you'd have to login with a password, but here's the code I have to Set the combobox:
Set PartNumOffr0EDrop = .Document.all.Item("PartNumOffr0EDrop")
myVal = PartNumOffr0EDrop.ListIndex
I need to know how to loop through the combobox and store the value of each member of the list to a variable or cell.
In VB is there a way to check the values in a combo box, to check whether the value you are trying to insert into it exists in the list, if not add it to the list.
View 3 Replies View RelatedI can ssign a list say for example A1:A40 to a combo box in VBA?
View 3 Replies View RelatedI have 2 columns of data on Sheet2. The first is Product in column B. The second is Benefit in column C.
I need to look at product column B on Sheet2 and add unique items to my first Combobox after the command Userform1.show.
The person using the form will select a product from Combobox1 and then Combobox2 should add the corresponding Benefits from the benefits column on Sheet2.
As a side note: I expect products and benefits will continue to be added to columns B and C in the future so I can't have a "hard-coded" set of rows if that makes sense.
I've pasted a small 2 product example of Sheet2 below.
ProductBenefit
Account DefenderLoss of Life
Account DefenderDisability
Account DefenderInvoluntary Unemployment
Account DefenderLeave of Absence
Account SecurityLoss of Life
Account SecurityDisability
Account SecurityInvoluntary Unemployment
Account SecurityLeave of Absence
Account SecurityHospitalization
Account SecurityNursing Home
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
unique list.xlsx
I have pulled a SharePoint list into my workbook. The list object (table) is still linked to the SharePoint list, as I'd like to synchronize it later on. I have filtered it with an autofilter. I'd like to delete all of the visible rows. I have tried a billion things to no avail. I have been searching Google for hours now. None of the examples work.
View 5 Replies View RelatedI can't seem to find a way to make a data validation list automatically show the first item in the list rather than showing blank.
View 10 Replies View RelatedI'm using Excel 2010 on a Windows 7 machine.
I have one sheet with a large list of dates and total prices.
I have a second sheet with a list of dates and unit prices.
I want to divide the total price in my first list by the unit price on my second list.
I want to somehow point Excel to the date in the first list, and then lookup the corresponding date in the second list to use the correct unit price.
My thoughts thus far have been along using VLOOKUP with WEEKNUM and YEAR but I've been unsuccessful.
i have many excel workbooks in a folder i want a macro that will get the names of all the files and make the file names so extracted as a hyperlink to open the files.
View 1 Replies View RelatedIt is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
I need to consolidate these two lists of data into one list.
First set is just a basic list of individuals with their data.
Second set is multiple entries for those same individuals. Each entry shows a subscription to a programme. The final single sheet should have one row per individual which shows all of the programmes they are subscribed to.
See attached, example sheet.
The real list is 3000 IDs, so need some kind of formula to do this.