I have 2 columns of data on Sheet2. The first is Product in column B. The second is Benefit in column C.
I need to look at product column B on Sheet2 and add unique items to my first Combobox after the command Userform1.show.
The person using the form will select a product from Combobox1 and then Combobox2 should add the corresponding Benefits from the benefits column on Sheet2.
As a side note: I expect products and benefits will continue to be added to columns B and C in the future so I can't have a "hard-coded" set of rows if that makes sense.
I've pasted a small 2 product example of Sheet2 below.
ProductBenefit
Account DefenderLoss of Life
Account DefenderDisability
Account DefenderInvoluntary Unemployment
Account DefenderLeave of Absence
Account SecurityLoss of Life
Account SecurityDisability
Account SecurityInvoluntary Unemployment
Account SecurityLeave of Absence
Account SecurityHospitalization
Account SecurityNursing Home
I am trying to create a form with a combobox drop down menu. The list I need displayed is in cells C4:C20 but I only want to show unique values not all of them.
I have five comboboxes in userform1, they are link to Column A, Column B, COlumn E, Column G and Column Z of "Reference" worksheets respectively. The values in each column could contain duplicate values. However, I'd like to only display the unique values in those combo boxes and I have no clue how to achieve this.
Populate Adv Filter Criteria from Inputbox with valid data
I've set up a macro to extract 3 different sets of data using Advanced Filter (same data range, different criteria & extract ranges)
There are multiple options (different individual dates) to satisfy the criteria (a date) for each of the 3 extracts and I want the user to select the criteria (a specific date) from the range of unique values in the data range upon which the Advanced Filter criteria is going to be applied. (A bit like the effect provided by Autofilter)
My initial attempt was to capture the criteria date from the user and populate a cell, and then have a vlookup function in another cell check if that crieteria value exists in the specified range. I then ran a loop in the VBA code until the value is valid (ie. exists in the range). However, to streamline this I was hoping to allow the user to see a list of the valid (available) dates when they respond to my Inputbox request for the criteria.
i have a list of surnames in column A in a spreadsheet i want to use this for the source of the combo box also i want this list to be unique and if the surname is not present i want to be able to put the name in the combo box and add it to the sheet
I have a column that is updated several times a day, I need to be able to view that list in a userform combo box and that box to be able to react like an autofilter list. I've tried the advanced filter thing but as th elist is contantly updated it makes this very hard to handle as I have to set macros to compile the list and then delete it once it's been used. Is there a way I can set vba code so the ComboBox populates unique fields, sorted AZ and removed the blanks without using the advanced filter..?
Each product is represented by a serial number (column A). The can be sorted on column A from smallest to largest prior to calculating results if that helps.
The repair list contains 1 entry per spare part used, so the same serial number may occur several times.
Furthermore, a product may have been repaired on several instances - so the serial numbers can span several dates (column B).
The solution i am looking for should return the number of unique repair dates per serial number. That way i can see, how many times each product has been repaired. Results can be displayed in an individual column.
I have a combobox on a Userform, when the userform initializes i want it to populate Combobox1 with all the Unique values from SHeet 1 Column A (variable length to the column)
I dont know how to select a unique record only.
*thinking a bit further ahead i have a second combobox that i need to populate with unique values from column B on sheet 1, where in column A matches what was selected in combobox 1
Centre Name Training Type Expert 1 Expert 2 Expert 3 Expert 4 MyCentre MyTraining Me MyCentre MyTraining Me MyCentre MyTraining Me MyCentre OtherTraining Me NewCentre NewTraining NewPerson
I am trying to create a user form (in VBA) with a combo box that has each centre name appear only once (despite the fact that in the database each occurs multiple times). When a specific centre is selected, this brings up all the different training types associated with that centre in a separate list box. When that training type is selected, it should bring up all of the experts in that training type (for the specific centre). I should mention that the range is static (though the data is always contiguous) as the database is updated on a going forward basis.
I need to create a drop-down (or a combo list) list based on a column in a separate worksheet (in the same workbook). The values in the column have many duplications, and I simply want the combo box to return a unique list.
After trying this using various options like drop-down boxes, combo boxes etc it does not seem to work. A drop-down box will return a complete list (including all of the duplicates). In addition the drop-down was linked to a cell and the value returned to the cell was a number based on the position in the list when what I actually wanted was the text. For example - my list in Worksheet 2:
PETS Cat Dog Dog Cat Horse Rabbit...
In Worksheet 1 if I choose 'Dog' from my Combo box (or drop-down) along with showing all of the duplicates it returns '3', instead of what I want 'Dog' and no duplicates.
I have a user form with a group of several option buttons. When an optionbutton is selected, programatically, I want a worksheet's named column to be parsed through to find unique entries and then have those entries passed to the form's combobox. I've spent the last hour searching for an answer but to no success
i'm writing a refrigeration selection user interface, working from values on an excel spreadsheet. how to get the programme to automatically select a value from a list or range once a user has selected corresponding value from a list within a combobox. for example if a user sets the temperature of their refrigerator to -5 celsius i need the programme to automatically select the corresponding value of enthalpy for the air at that temperature.
I have a userform where I have 2 comboboxes. The first combobox shows the the first column (only 1 of each) and the second comboBox shows me the secondary list that correlates to the valuse in the first from column B. Now I have a text box that I am trying to get the value from column C depending on what I have in the first 2 comboboxes. What is the easiest way to do it? This is all in VB since it is a UserForm, and using Vlookup seems to be too many lines if I go that route. Is there a way to use Index and Match in VB where it would be more efficient? I attached just a sample of how the data would be layed out in the Excel sheet.
I have my dummy data, and I have (what I think) is how I want the data to be shown. My friend uses Google Sheets, but I prefer Excel. I am trying to convert the code because I am a stickler for excel. Typically I can convert codes some easily, but this is way beyond me.
For Column A: I want to create a list on sheet 'Setup!' based on ids!D2:D="yes". If that list has duplicate entries, I would like only the first entry to show up, but for the next entries I would like the cell to be blank. (this is important for the next step) For Column C: I want to have the corresponding dates go with the name entry. For Column D: I want to have the notes go with the corresponding date entry. (I believe I can manipulate Column C's code to do Column D myself).
I am also going to upload a data sheet, and an expected results sheet.
The code below extracts unique distinct values from column A, except cell A1. Then the code adds the extracted unique distinct values to the combo box.
Sub FilterUniqueData() Dim Lrow As Long, test As New Collection Dim Value As Variant, temp() As Variant ReDim temp(0) On Error Resume Next With Worksheets("Sheet1")
[Code]....
The vba code below copies the selected value to cell C5 whenever the combobox is selected
Copy the code into a standard module.Assign this macro to the combobox
Sub SelectedValue() With Worksheets("Sheet1").Shapes("Drop Down 1").ControlFormat Worksheets("Sheet1").Range("C5") = .List(.Value) End With End Sub
Vba code belows instanly refresh the combobox when values are added/edited or removed from column A,
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("$A:$A")) Is Nothing Then Call FilterUniqueData End If End Sub
My problem is this:
Everything will be working fine if the all combobox and data can be found in 1 sheet, but how could i make some tweaks if the combo box is located in sheet 2 provided your data to be populated is in sheet 1, i tried everything but the combobox doesnt update,
The function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant Dim row As Range Dim elements() As String
I'm looking for a way to get a unique list from a column to a data validation drop down list. Any fancy formula or vba script to create a UDF which. Does this?
I've searched the forum and believe this thread to be the closest to what im looking for, but its doesnt completely apply: matrix to list conversion. I have an attachment to support my questions (see attached). I have a matrix of words (strings) that contain repeating and non-repeating contents. The matrix also has spaces which are of no value. Essentially, the VBA needs to ' analyze' this matrix and create a consolidated frequency list (as shown in the file).
The matrices are HUGE and therefore some of the clumsy VBA i am using is turning out to be a bit inefficient. The file also contains formulas and such that I cannot use AutoFilter nor can I use Insert or Delete rows...so the VBA shouldnt use those either.
Update a list using a Combo Box works fine when the list is on the same worksheet but when the list is on a different Worksheet it does not work.
Is this achievable? I guess so! but was wondering how to do it.
e.g: if my range defined name called let us say "SP" with a range AD1:AD60 in Sheet1 when I use a combo box the Listfillrange will contain: SP
When inserting a new entry using the combobox it works fine but when the same defined name range points to a different Worksheet example: Sheet2 then the update does not work although the ListFillRange contains the same Range name: SP.
I have a dynamic list of names from B2:B500. I want to write a macro that finds all the unique entries from that list and pastes it to AD3:AD501 everytime the macro is run. What would be the code for this procedure.
Name --------- Jones, Bob Jones, Bob Jones, Bob Smith, Mike Smith, Mike Smith, Mike Calai, Dave Calai, Dave Calai, Dave Etc...
What I want to do is take the entire list and create a distinct list that I can use in a named range then use a validation list to have a drop down within a different tab.
I am trying to filter a list for a ComboBox using VB. I have the following
Defined Name 'MemMapSel' 1stCol 2ndCol 3rdCol 4thCol 5thCol Alarms a BOOL 2001 4000 Commands i BOOL 4001 5000 Status s INT 7001 8000 Free x DINT 9001 10000 etc etc
I am using a combobox to select which row i require and am mapping the 4thCol to a cell At present the property 'ListFillRange' is set to 'MemMapSel' displaying all 5 columns and bounding column 4 as the value
What i really need is to Filter this list, so that the combobox only displays the BOOL entries in the 3rdCol, or the INT, etc I think i can use the Select function to do this, but i am not sure how to go about it.
Trying to get the list from a combobox in an online form. I'm doing this as a check to make sure what I need to be there is there. Then the macro will select what I need and move on. If not found in the list, then it will move on...
So I start thinking about it and I'm not quite sure how to do that in Forms. Does ListIndex get me there?
I'm unable to give the site because you'd have to login with a password, but here's the code I have to Set the combobox:
Set PartNumOffr0EDrop = .Document.all.Item("PartNumOffr0EDrop") myVal = PartNumOffr0EDrop.ListIndex
I need to know how to loop through the combobox and store the value of each member of the list to a variable or cell.
