I have three columns (A to C) with contineous data (# rows always variable).
I would manually type a number in a cell (S2) that would correspond with a number in Column A. What I would like the code to do is that it finds the number in column A and selects the whole range in column B and C starting from that row, and copies that whole selection to N10.
After that all the data in column N should be substracted with a value given in S3 and all data in column O with a value given in S4.
I'm trying to create a macro that can lookup values down a list, find that value within another list and copy the adjacent cells.
The values to look for will always be on the same column and the values to look into will always be in the same range or columns but not always in the same row.
For example.
AI:AI contains a list of ID's which will be manually input every day so they might have a different order.
C:AF has all the data to look into. C always being a list of ID values and I want for every ID found on AI:AI to be search for on C:C: and then once a match is found, I need specific adjancent cell values to be copied next to the ID found on AI.
The values that need to be returned are found on columns B,D,F,G,H,I,J,P,AF and they will always display on those columns.
I've been doing this based on vlookup and INDEX/MATCh formulas but I've come across some limitations for something I want to develop further so I'm trying to do this based on VBA.
Split from: Clear Range To Right Of Active Cell Down. I was working through this the first step was to clear the contents of the cells. After they are cleared, I have another sub that then goes and retreives a unquie number and places it back at the top of the column that I just cleared. Would this same code that cleared the cells contents work to copy the contents of the active cell down that same column, until the cell to its right is blank? -R-
I am new to VBA and have tried to develop the code for finding a specific stock symbol (Column A) from over 4200 symbols from a downloaded csv file, copy the data in in its (specific symbol's) row (in the next 5 columns B to F) to the 3rd blank row in the master workbook (data arranged from Bottom to Top). In the Master workbook each stock symbol has a worksheet with its symbol as the tab e.g. BHP.AX is the tab or sheetname for BHP stock in the Australian Stock Exchange. The downloaded file comes from a subscribed site EODData which provides daily OHLCV (Open/High/Low/Close/Volume) data against each symbol.
My attempt is shown below and it is very primitive. It does not work! I wish to run it from the Master workbook (name:-0PortfolioASXMultipleIB.xlsm) and not from Csv Data file.
VB: Sub Macro0CopyFromCSV() 'Insert a blank row and format it in Master workbook Rows("3:3").Select Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove
I have a workbook with 30 worksheets. Each sheet has 84 rows of data (start in 15 columns (A to O). I would like to create a summary sheet that only shows the most important data from each sheet.
The summary sheet would have 12 lines of headers and formatted crap at the top. The Summary sheet header columns would be:
Site (A), Date (B) Health (C), Status (D), Critical (E), Task (F), Dependencies (G), Owner (H), T-Date (I), Task Date (J), Mitigation Date (I)
The data in the sheets are not in that order, of course.
That 1. puts the name of the sheet I am copying from in column A 2. the deadline date in Column B (that date is always in C10 of each worksheet) 3. and copies Cells from Column A,B,G,H,I,O in any row in which the value in A is not "good" into columns C through H. I would like to paste those rows into the summary sheet. I have code that loops through the sheets and rows in each sheet to find the rows to copy. I can copy cell values directly from the active sheet to the summary sheet, but because I am copying a cell at a time, it takes 7 minutes. Yes I am impatient :)
Here is the code snippet where the copying is done:
Dim sh As Worksheet 'current worksheet Dim DestSh As Worksheet 'worksheet in which to paste summary Dim Last As Long Dim CopyRow As Long 'row to copy Dim LastCopyRow As Long
[Code] ........
ExitTheSub:
Application.Goto Sheets("KMARollup").Cells(1) End Sub
I think there must be a way to use ranges to build an array of cell values and paste only once but I am lost here.
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe 456 Jane Doe
List of individuals with state business
John Doe AR John Doe CO John Doe FL John Doe MS John Doe TX Jane Doe MS Jane Doe TX Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR 123 John Doe CO 123 John Doe FL 456 Jane Doe MS 456 Jane Doe TX
I have two worksheets. The first one contains 500 rows:
Column A - Company Name Column J - Formula that calculates a 'company score' based on other data in columns B-H Column K - Number of directors
The second worksheet contains over 3000 rows:
Column A - Name Column B - Company Column C - Designation
I want to caculate a score for each person (from worksheet 2) that does the following:
Personal Score = ('Company Score' / No. of directors) * Designation Weighting
Where Designation Weighting (numerical value) is determined by Designation (text). There are 10 different and mutually exclusive types of text in the Designation column.
My problem is compounded by the fact that each person (in worksheet 2) can be directors on several companies. The Personal Score that I want to calculate needs to recognise which different companies they are directors of and sum the scores derived from each company.
I need is spread across various rows. In a separate sheet I want to be able to lookup two identifiers and pull the number needed in the adjacent row.
The first identifier is a 3 letter character, the second is CURREVO and I need the number to the right of CURREVO. My problem is CURREVO is not always in the same column, but in relation to the 3 letter character is always in the same row.
A B C D E F GDMGCURREVO52011.25YTDREVO243085.00DTYCURREVO11892.50YTDREVO59783.50ECUCURREVI1943.00YTDREVI 5,541.25CURFRQI4.00EEGCURREVO32864.75YTDREVO205426.75EICCURREVO658761.26YTDREVO3507022.68EILCURREVO335741.70YTDREVO1720830.72ENTCURREVI161242.39YTDREVI638681.84CVLCURREVO796266.21YTDREVO4816890.98ENDCURREVI34479.19YTDREVI44074.54EYECURREVI11880.12YTDREVI 108,007.02(Null)MICCURREVO1098694.15YTDREVO5766072.54NEUCURREVI25251.90YTDREVI 158,236.60CURREVO207.00
i.e. in a seperate sheet, I want to pull NEU, in that row I want to find CURREVO and bring back the adjacent number = 207.00
Basically what I am trying to do is use a Lookup formula on a sales invoice where the product name and product price will be automatically entered into the sales form when the product ID is entered. What would the formula be?
Product Information RegionProduct IDProduct NameProduct Price Product IDHPPHomeware Pizza Pan19.95 Product NameSPPStone Pizza Pan 29.95 Product PriceHCDHomeware Casserole Dish19.95 Units SoldHCPHomeware Cookie Pan 9.95 Total SaleCWChina Wok 19.95 HEWHomeware Electric Wok29.95 WCMWilson Coffee Machine29.95 HBMHomeware Bread Machine49.95 HBMDHomeware Bread Machine -Deluxe89.95 HRHomeware Rotisserie119.95 OGGOlson Gas Grill 159.95 OEGOlson Electric Grill 159.95
I have an excel sheet with cols of information e.g IDNo, FirstName,LastName etc. I have created a form in VB where you enter the IDNo (& Click on a command button called View) It should populate designated textboxes on the Form. Thus it should check the col where the IDNo is stored, find the IDNo and populate the adjacent cols i.e FirstName, LastName in designated textboxes on the form.
I have a list of dates in column AF. I would like to retrieve a value from the 2nd occurrence of a date, so I used the function for the Nth Occurrence on this website as follows:
Function Nth_Occurrence(range_look As Range, find_it As String, _ occurrence As Long, offset_row As Long, offset_col As Long) Dim lCount As Long Dim rFound As Range Set rFound = range_look.Cells(1, 1) For lCount = 1 To occurrence Set rFound = range_look. Find(find_it, rFound, xlValues, xlWhole) Next lCount Nth_Occurrence = rFound.Offset(offset_row, offset_col) End Function
The excel formula I am using is as follows: =Nth_Occurrence(AF2:AF622,AE2,2,0,1) Where AE2 is the date I am looking up. My question is this: When I put in a date ("1/12/2007") instead of AE2, i get the correct value. I tried giving AE2 and the AF column the same date formatting (3/14/2001), but this doesn't work. The date I am searching for also changes, so I cannot just type the date into the excel formula.
Essentially, sheet b is a list of 900 people I need to mail to. Sheet a has 3000 rows of people, many of whom don't need the mailing. It has mailing addresses that we need in sheet b.
We have two worksheets, sheet a and sheet b
compare sheet b, column c (email addresses) to sheet a, column x, (email addresses). If they match, move sheet a, columns d, e, f, g, and h to sheet b.
I have two excel sheets. The first sheet has a column with codes and another column with dates. There are more than one date for the same code. The second sheet has just one unique code. I would like to match the code on the second sheet with the code on the first sheet and return ALL the dates associated with that code to the second sheet - horizontally.
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B Expiry Date________Redeemed by 15/08/2014 15/02/2014 15/08/2014________John 15/02/2010________Marc 15/02/2011________Bob
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData() Dim counter As Integer counter = Sheets("Imported Data").Range("Counter")
i had data in html format.i want the data to be splitted into columns in excel.
HTML FORMAT Employee name Emp id
johnabraham wesley peter neiljohn and so on....... 254800 254801 254802 254803
i tried copying the data from html to excel. Then applied text to columns but i m getting incomplete names from this step.
My problem is how would i get the full name in one Column(Column B) & the emp id in the next Column (COLUMN C).Column A will have the data copied from html page. The length of the employee name differs. The only saving tip is that the employee name will suffix with sno like
A sheet, compose of groups of 9 items and their corresponding qty. I need to have the same serial no. be commented on each items of the same group. I am doing in this mechanical way:
1. add comment of serial no. on the first item of group, 2. copy and paste, with paste special>>comments, on the remaining items of the same group, 3. Repeat this sequences on the other groups, which means hundreds.
Other than these tedious procedures, is there any better way?
I am setting up a schedule maker for a coworker, in which I have divided two columns into time in and time out for each day of the week. My coworker wants the cell to be highlighted red if the shift is a night shift (Begins after 4), and I used conditional formatting to set up both columns independently to evaluate if the value of their content is after 4 PM. However, this means if a shift starts at noon, but ends after 4, only the time out cell will be highlighted red, not a huge issue but it isn't aesthetically pleasing.
I am trying to use defined range names in a vlookup function. The target ranges contain non-adjacent columns. The formula wizard gives me an error msg "#value" and the vlookup returns #N/A.
In a worksheet, J2:J52 contains a list of unique strings; each cell populated by an embedded formula. Some of the cells contain a valid 'blank' "" given by the formula.
I'd like K2:K52 to contain the values J2:J52, with all the populated cells stacked at the top and the 'blank' cells at the bottom. 'Blank' cells do not have to be in any particular order.
I've been fiddling with the formula kindly provided by WindKnife on the second post in the thread below for the past couple of hours, but to no avail:
I have a sheet that I populate with data, and I would like to create a formula (or some code) that will look down column A, and if any of the cells contain a value >1 copy the cell and the adjacent cell (column B) and paste both values into a new sheet.
I have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of a new cell:
F|45|A|30|F|15|F|10
Using the SUMIF formula, I want to add all numbers which are preceded by a cell containing the letter F.
SUMIF(A1:G1,"F",B1:H1)
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
