I need to create a chart where there is one horizontal series and one vertical series for each data point on the Y axis. Example: results for 5 people (series along the X axis) in trials vs. results for the same 5 people in the actual competition (second X series). The trials vs. actual is the Y series for a certain competition on date MMDDYY. The Y axis would represent the various competitions throughout the year.
I need to make a scatterplot with multiple series of data that are of different length. Example:
XorigYorig X1Y1 X2 Y2
0.6415.31.1424.31.5408.6
1.1410.42.1413.13.8404.5
1.7370.22.8368.55.2392.1
2.3312.43.7336.6
2.9298.74.4311.3
3.4294.85.2287.6
4.0269.3
4.6253.7
5.2245.8
I want to get an xyscatterplot with, in this example, 3 independent lines. In the real situation there are about 18 series in a data set with cell counts over 40k for the entire set. I'd like to do this in VBA, but would also be interested in seeing how to do it using the chart wizard
I have a chart with 3 series':
Series1
Series2
Series3
The chart is called chtEngagement. I want to use vb to update these series'.
Series1 should be shown as:
I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
Sheet1
*EFGH5*Week 1Week 2Week 36Product 11,234,123 1,258,805 1,283,982 7Product 21,234,223 1,258,907 1,284,086 8Product 33,423,321 3,491,787 3,561,623 9Product 4342,121 348,963 355,943 10Product 52,343,424 2,390,292 2,438,098
Excel tables to the web >> Excel Jeanie HTML 4
I have a scatter graph that has over 100 curves that im need on one graph that at the moment i putting each x and y and name in by hand in series. I have been doing it for hours and have looked round the site to see if anything similar answer on ozgrid would help but im baffled
i was just wondering if there is an easier way of doing this
i havent really used macros but iv been reading up on it can i used it to do this?
I have added the table and graph and this is how i would like all the columns to look like
its the table called graph that makes the curves that i would like to be able to add in quickly
the rest im not too fussed about.
I have several dynamic charts using named ranges, but I am charting 1 series of data. What about when I have multiple data sets or series and do not want to use PivotTables? Do I really have to make each one a named range? If that's the case, using VBA looks much simpler.
View 2 Replies View RelatedI have a column:
LABEL COUNT
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 2
empty cell
1 of 16
15 empty cells
I need to fill the empty cell with the "series" (2 of 2, 2 of 16, 3 of 16). This is just an example of data - there are all different series - 1 of 12, 1 of 5, etc.
Anyway - was hoping to highlight the whole column and be able to auto fill instead of having to extend each series. I have tried straightforward fill series which doesnt work of course. I have tried go to special - blanks but cant find right combo to make it work.
Will it work or do I have to either do manually or with a macro?
I have created a dynamic chart for multiple series. I have created this using the offset function and have named 20 ranges. The problem I have is that if only 19 of the 20 named ranges are populated it reads that the worksheet contains one or more invalid references.
Is there a way to stop this from happening?
I need to fill multiple number series in the same column. Example:
Have
Want
1
1
[Code]....
how can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies View Relatedhow to create a new XYScatter series based on dynamic conditions. For example, I have a very large, unsorted table with three columns: TGT, X, Y, Z.
TGT is an integer from 1-99 and is being filtered dynamically with an Advanced Filter. Anywhere from 0 to 10 conditions are being filtered by the Advanced Filter.
I would like to create a new series for each unique instance of TGT, with or without filtering.
I have a chart that combines 2 xy plots and a set of stacked columns ( total of 4 series).
I can adjust the series ordering between the 2 xy plots, and between the stacked columns, but not for all 4 at the same time.
I'd like the legend to show up as:
Series1, Series2, Series3, Series4
where 1 and 2 are the xy plots and 3 & 4 are the components of the stacked columns.
It is currently:
Series3, Series4, Series1, Series2
Any idea how to re-order the legend entries?
My friend has set up an excel workbook with a sheet for every month (labelled Jan graphs, Feb graphs, Mar graphs etc) which has 7 pie charts per sheet. The problem is the pie charts are showing the 0% fields and the data labels are overlapping. I have found a macro that gets rid of the 0% labels but I need to repeat the macro for all the 7 charts on each sheet and all 12 worksheets for each month of the year. I am very new to VBA and coding of any type and have looked but can't find the solution.
The macro I am currently using for "Chart1" on "Jan graphs" is below. The charts are labelled Chart1, Chart2, Chart3 etc.
Sub ClearLabels()
Worksheets("Jan graphs").ChartObjects("Chart 1").Chart.ApplyDataLabels _
Type:=xlShowLabelAndPercent
For Each x In Worksheets("Jan graphs").ChartObjects("Chart 1"). _
Chart.SeriesCollection(1).Points
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
View 7 Replies View RelatedWhat I want to achieve is a script that would create a new scatter plot of multiple series from a selected block of cell. I found a thread that was similar but what is different from my data is that my x values are different for each series.
The format of the data is in the following format, the first series will the first x,y pair, the 2nd series would be the second x,y pair. I don't know if it'll be an issue but one thing is that the date might be different lengths. For instance, the 3rd series, only has 4 data points, whereas the other series contains 6 data points?
x0.200.400.600.801.001.20
y5.002.501.671.251.000.83
x0.100.200.300.500.701.30
y5.002.501.671.000.710.38
x0.100.300.400.50
y6.672.221.671.33
So essentially, is there a way I can have the script say, select your range, and then graph the selected range as a scatter plot?
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7
I'm using the following code to set the colours of the slices of all the pie charts in my spreadsheet based on each slice's legend's label: ....
View 9 Replies View RelatedI am trying to create a line graph that will incorporate multiple columns of data in one series of data. The reason I do not place all of the data in one column is because it could exceed the maximum amount of rows allowed in excel. Also I need the data split up for viewing purposes.
I can easily just graph one column but how do I combine all the columns into one line graph with the data being in separate columns. Basically all the columns will be my Y values and X values are just 1:n.
Example Below:
Column AColumn B Column C159261037114812
Now in the example all of the values are x values.
Happy Morning to all I am new here, i need your help how can I get the Max and Min value of this ref#
GHACCCSBF00044711
GHACCCSBF00044712
GHACCCSBF00044713
GHACCCSBF00044714 ....
B25:AK25 represent months 1-36 B26:AK26 is declining dollar value tied to other formulas Need formula which indicates in which month the associated dollar amount in row 26 first declines to or below zero.
View 2 Replies View RelatedI need to make a formula in a Excel (I have Excel 2003), that takes value X and adds Z to it, then increases X by 1 and again adds Z to it, then again increases X by 1 and adds Z to it, until it reaches value Y plus Z. Or, repeating the (X+1)+5 process N times.
For example, if X=3, Y=6 and Z=5:
(3+5)+(4+5)+(5+5)+(6+5)
X (and Y) will have to use values from 1 to up to tens of thousand. X, Y and Z (or X, Z and N) will be cell values from an existing table.
I m looking to fill down a column where I am assigning a number that maps to a certain week of the year. In essence after every 7th value the number should increment by 1.
Date Day ConsumptionWeek number
1/01/2009Thu 827 1
2/01/2009Fri 907 1
3/01/2009Sat 1,013 1
4/01/2009Sun 1,051
5/01/2009Mon 1,097
6/01/2009Tue 1,155
7/01/2009Wed 1,044
8/01/2009Thu 976 2
9/01/2009Fri 1,034 2
10/01/2009Sat 1,107
11/01/2009Sun 1,073
12/01/2009Mon 1,161
13/01/2009Tue 1,395
14/01/2009Wed 1,172
15/01/2009Thu 1,060
16/01/2009Fri 1,008
I want to split a column series as per its left three 3 digits into different columns as example given below....
View 9 Replies View RelatedVog I am trying to use your code from following post
http://www.mrexcel.com/forum/showthread.php?t=384758
Actual when I use to compare 2 series in same sheet I use following formula in column C (All Series "Number Stored as Text")
HTML If(Iserror(Vlookup(B2,$A$2:$A$40000,1,False)),"Not Found", "Found")
How should I use mentioned post code as per my formula?
