Nesting OR, AND Within IF: Comparison Amongst Several Cells And Returning A 1 If True
Dec 24, 2008
I'm trying to do a comparison amongst several cells and returning a 1 if true. if D25 is blank or does not equal Yes, Mixed or SP3, and if both F25 and G25 are blank, the output the value 1. First try:
=IF(AND(D21="",D21<>"Mixed",F21="",G21=""),1,"") - This seems to ignore the Mixed and outputs a 1 even if D21=Mixed.
Second try:
=IF(AND(OR(D25<>"Yes",D25<>"Mixed",D25<>"SP3"),F25="",G25=""),1,"") - same as above, if D25=Mixed then value of the cell is 1.
View 2 Replies
ADVERTISEMENT
Apr 20, 2009
Trying the following syntax and I do not get any value in the cell if either of the conditions are true. Pretty sure I'm nesting the functions incorrectly. Maybe I should use Index/Match? =IF(AND(E24="SI",F24="SI"),"ER2","",)IF(AND(E24="sn",F24="sn"),"er2","")
View 3 Replies
View Related
Mar 31, 2009
I have the following formulas which when I try to put in excel, it says I have too many levels of nesting:
=IF(K4="","",IF(AND(Hta_1>=D4,Hba_1<=D4,Hta_1<>"",Hba_1<>""),1,IF(AND(Hta_2>D4,Hba_2<=D4,Hta_2<>"",H ba_2<>""),2,IF(AND(Hta_3>D4,Hba_3<=D4,Hta_3<>"",Hba_3<>""),3,IF(AND(Hta_4>D4,Hba_4<=D4,Hta_4<>"",Hba _4<>""),4,IF(AND(Hta_5>D4,Hba_5<=D4,Hta_5<>"",Hba_5<>""),5 ,IF(AND(Hta_6>D4,Hba_6<=D4,Hta_6<>"",Hba_6<>""),6,IF(AND(Hta_7>D4,Hba_7<=D4,Hta_7<>"",Hba_7<>""),7," No reinforcements"))))))..........
View 7 Replies
View Related
Jan 24, 2014
I'm trying to compare three formula results and return the largest number. Ex.:
2217922
The first three numbers are formula results and the last is the following formula:
=IF(O5>P5,O5,IF(P5>Q5,P5,Q5))
Unfortunately, with the list below, you can see the last number (the comparison formula) isn't always the greater of the three:
2217922
2017920
01799
01399
01399
01299
01299
01299
01299
01199
01199
01099
0088
0077
0077
I've also tried other formulas, with no success:
=LARGE(O5:Q5,1)
=MAX(O5:Q5)
=IF(MAX(O5:Q5)=O5,O5,IF(MAX(O5:Q5)=P5,P5,IF(MAX(O5:Q5)=Q5,Q5,"Error")))
What's odd is that if I create the formulas above independent of the specific formula data (O5, P5, and Q5) and just type in numbers, those formulas do exactly what they should. Can I not compare data returned though formula calculations?
View 12 Replies
View Related
Dec 5, 2007
i have used the following formula
=IF(OR(LEFT(J2)="3",L2>=15,L2
View 9 Replies
View Related
Feb 10, 2009
I'm quite new to array formulas in excel and was wondering whether or not I can advance on this formula:
=AND($C$5=B7,$K$5=G5)
The problem is I would like to compare the entire colums (or array) and return the number of 'TRUE' statements in the array as a value.
=AND($C$5:$C$65536=B7,$K$5:$K$65536=G5)
however, this returns all values as 'FALSE'
example of arrgument:
IF C5:C65535=customer then count how many cells in K5:K65536=completed
View 8 Replies
View Related
Jun 24, 2009
I have a formula in column A of the following sheet. The problem is that when the entry in cell H contains a letter as well as a number then the formula in column a returns 0.
Also if the value for false in the forumula is changed from 0 i.e to 1 or 2, then a value is returned in column A (this is shown in the red highlighted cells).
AssetRegexample.xls
Does anyone have any idea why this is?
View 7 Replies
View Related
May 5, 2009
Want to write an if then that states if a cell ends with (or includes) .com or .org then = "", if not then = "1".
View 3 Replies
View Related
Jan 18, 2012
I need to compare the MMDD in two cells. Example: If the Accrual date is 09/07/10, then I need to know if it falls in the payroll period date of 01/12/12. I just need the MMDD compare to put in my IF statement.
View 1 Replies
View Related
May 15, 2014
I am working on Excel file with names and I would like to have a possibility to check if all characters from one cell are mentioned in another one.
The background of the problem is that the names are provided in different types (e.g. O.M.Izgala, M.O.Izgala, or only Izgala) so I believe I should first remove any spaces, dots etc. to have clear continuous text.
Finding a formula (if any exist), which can check if all digits from one cell are in the second relevant cell regardless the order of the digits. I would like to show you short example:
name needs to be checked cell to compare expected results
OMIZGALA MIZGALA no (as O is not in the relevant cell)
OMIZGALA MIZGALAO yes (as all digits are mentioned in the relevant cell but in different order)
OMIZGALA MOIZGALA yes (as all digits are mentioned in the relevant cell but in different order)
if it can work in Excel.
View 7 Replies
View Related
Jan 16, 2014
I've tried some of the basic formulas, but this is beyond me.
I have table A of 500 rows and need to compare it to table B of 2000 rows.
A
B
C
D
E
1
D6 - 1.01
Table with PC
3
Yes
2
D6 - 1.01
Bookshelf
4
No
[Code] .......
For example with these two, from the second table to the first. IF column B equal to column and the corresponding column C equal to the corresponding column C, return for example "yes". Then I need to check the same thing for the corresponding other columns, but basically everything would be tied to B and C. The problem is the second table, larger one, is basically all over the place, I could manage to do this if we would be talking equal length tables, but I do not know what formulas I could use to check further down a row once we find an equal value.
View 5 Replies
View Related
Aug 2, 2006
What I am trying to do is have a macro that do a comparison between 2 cells every 100 milliseconds. One of the cell is constant updating from RTD (Real Time Data). And if its false, to nothing. However if true, I would want it to run some codes and exit the macro/procedure. I also need some way of stopping the macro at any time.
View 6 Replies
View Related
Aug 2, 2009
I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
View 8 Replies
View Related
Jun 9, 2008
i need mark all cells which contain formula IF at the beginning(only if formula is true) by red color.
View 9 Replies
View Related
Dec 4, 2013
I've got a mega excel sheet right now with multiple people making updates to it on a daily basis. As such I am trying to find a way to output various totals in a separate static table which i can grab at any point and be confident numbers are correct.
The problem, firstly I cant figure out how to have multiple true false formulas checking the sheet from 1 cell. i.e "Check column B True/False for RestrauntNameXYZ + Check column E for true/false GroupABC + check column G for true/false Lunch"
and then
Calculate sum of column A for all rows which above combinations of true/false checks spit out.
View 7 Replies
View Related
Feb 21, 2014
I have a column that says either TRUE or FALSE this is dependent on what number i input into another cell, so if i input 8, TRUE shows on every 8th row,
I want the cells that say TRUE to also have a sequential number next to it in the column beside it.
Formula i have: =MOD(ROW(S2)-1,nth_No.)=0
So for example, every 3rd row is TRUE, i am wanting a sequential number beside it:
FALSE
FALSE
FALSE
TRUE 1
FALSE
FALSE
FALSE
TRUE 2
FALSE
FALSE
FALSE
TRUE 3
View 6 Replies
View Related
Feb 6, 2013
Is there a way to link to cells so that one cell is populated with the others value if a checkbox is set to true?
In other words if the checkbox isnt selected the two cells would be as normal. If checkbox is checked, I want to enter data in one cell and have it show up in the other. I cannot use formulas as I use spin buttons on these cells as well.
I can get it to work with a worksheet change event but that is proving to be more buggy than anything I have ever seen. The worksheet change event is set to one cell but it the code executes if any cell is changed. This has happened before so Id rather not use the worksheet change event if possible.
View 4 Replies
View Related
Aug 1, 2006
trying to put a formula in to find the true value of cells, i.e.
need the positive value of these cells (into one cell), note below, assume colume A1-A6.
FALSE
FALSE
FALSE
35
FALSE
FALSE
View 9 Replies
View Related
Jul 31, 2008
I'm trying to assist is working with sensitive data, and for security reasons I am unable to post the Excel sheet here. Here goes:
The user is working with a sheet in which uses checkboxes, and wants to assign values from cells in the same row as the checkbox to corresponding cells in the sheet (not a different book) if the box is checked.
I guess I should just ask what the best way to accomplish this is? I was thinking I need to do an IF test (do checkboxes return TRUE/FALSE?) and then assign values from the cells I need to corresponding cells in the next sheet. The big question for me using this method: how can I use a single IF statement to assign multiple cell values?
View 3 Replies
View Related
Apr 6, 2014
Find the attached : example.xlsx
My requirement is compare two cells a1 & a2 if found true highlight a2,compare a2 & a3 if found same highlight a3 or compare a3 and a4 and repeat the same for the entire sheet.
View 1 Replies
View Related
Dec 4, 2009
I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies
View Related
Apr 25, 2006
I have a worksheet containing appr. 9000 part numbers that have four different columns as: annual volume, dispatch quantity and turn over speed.
I want to count all rows where these conditions are true:
(annual volume / dispatch quantity)>turn over speed
I thought I could do something like this but it turns out wrong:
=COUNTIF((annual volume/dispatch quantity); >turn over speed)
This does not work.
Is there a way that I can do this easily?
note: the " ;" is correct. In my excel I use ; instead of " , ".
View 12 Replies
View Related
Jun 2, 2009
The function below only returns a true value for cells with a month value of September, but not those with December, March or June. Each cell in Row 1 contains a month. A1 = 9/1/2009. B= 10/1/2009 and so on.
View 2 Replies
View Related
Feb 14, 2008
It brought up my own thread, I didn't realise it untill today, but the answer I been using uses conditional formating to highlight the lowest cells in each row. And as Sicarii pointed out earlier today you can't select a cell my color with conditional formating turned on. can I highlight some other way or can I select cells to copy some diffrent way. This is the VBA I use to select the lowest price.
Sub FIND_LOW_PRICE()
Range("a1:H6").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, _
Formula1:="=and(a1=min($a1:$H1),not(isblank(a1)))"
Selection.FormatConditions(1).Interior.ColorIndex = 6
End Sub
And this is the code that Sicarii supplied and correctly warned me will not work with conditional formating.
Sub COPY_BASED_ON_COLOR()
Dim RngCol As Range
Dim lLoop As Long
With Sheets("Sheet1")
Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp))
End With
For lLoop = RngCol.Rows.Count To 1 Step -1
If Range("B" & lLoop).Interior.ColorIndex = 6 Then
Sheets("Sheet2").Range("B" & lLoop) = Sheets("Sheet1").Range("B" & lLoop)........................
View 2 Replies
View Related
Oct 11, 2013
I am using MS Excel 2010 want what to change a number of cells if a value is true e.g.
Row one has the headings Prz, Stat, Val, andPts
Row two has the following values :-
(Prz) a2 =2, (Stat) b2=1, (Val) c2=$30, (Pts) d2=10
How do I do the following in Excel :-
IF B2=1 THEN A2+1 AND C2+30 AND D2+5
so that the above cells are changed to
(Prz) a2 =3, (Val) c2=$30, (Pts) d2=10
View 4 Replies
View Related
Jun 9, 2014
I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies
View Related
Mar 26, 2014
I'm trying to create a rec report, ideally on one page, for multiple criteria. The situation is we get a report on our trade positions (investment stuff) from an outside service we use. We also have a report internally from what we've booked. We're looking to tie out are basic things like price, original par, revised par, trade date, counter-party banks, etc. I've consolidated data from both sources on one page (DATA) where all data points are lined up (say EXTERNAL is from rows 1-500, and INTERNAL is 510-1010). Now I need to create a front page showing the result of each tie-out. The lookup value will be a combination of the fund name + trade ticket number which would almost guarantee a unique ID (fund name XYZ, ticket number 12345 = XYZ12345)
Current tabs on spreadsheet: DATA, EXTERNAL, INTERNAL. I need to add a REC page
Question: What formula can I use to check on each and return TRUE/FALSE? The goal is to have about 8 columns on the REC, each for one of the tie-outs (let's use price as an example.). I know the basic VLOOKUP to return one value, but it appears in this case I will need VLOOKUP to check two matching values based on unique ID XZY12345, compare the price, and return TRUE if they match, FALSE if they don't
Here's something I saw from one of our spreadsheets that I think does the same to confirm counter-party, though I have no idea how to read this lengthy formula.
=EXACT(VLOOKUP(IF(Q2="COMPANY",R2,Q2),FUNDS!$M$1:$N$400,2,FALSE),
INDEX(PENDING!$G$4:$G$3218,MATCH(CP!C2,PENDING!$N$4:$N$3218,0)))
View 9 Replies
View Related
Jan 14, 2009
I need to create a formula that will give me True or False if text in a cell matches any cells in a range.
For example:
Column A and B have text:
Account
Date
Name
Species
Column C has other and sometimes matching text:
Name
Deal
What formula would I use to find out if all cells in Columns A and B are represented in Column C?
View 3 Replies
View Related
Jun 9, 2014
I'm trying to match and make judgement for my excel file and return as "OK" or "NG"
Eg.: New Picture.png
View 6 Replies
View Related
Mar 14, 2009
I am trying to use lookup to return the value when the condition of two cells are met.....
View 10 Replies
View Related
