Color All Cells With TRUE
Jun 9, 2008i need mark all cells which contain formula IF at the beginning(only if formula is true) by red color.
View 9 Replies
ADVERTISEMENT
Make The True Format The Color
Oct 22, 2007I have =(D4-C4)<40 (if the difference is 40 or less then color the font orange) but if the difference is 0 or a negative, I need it to do nothing. I don't know how to do the nothing part. I tried using the IF but couldn't figure out how to make the true format the color
View 5 Replies View RelatedFill Cell With Certain Color If Item Is True?
Feb 20, 2014I wish to do the following & and am struggling (attempted to do it in Conditional Formatting but have not succeeded)
I want to do the following :-
If the date in cell A1 has no date entered i.e blank then fill D1 in Yellow If a date in cell B1 is past then fill Cell D1 Red If a date in cell C1 is entered with a date(any) then fill D1 in Green
Check Font Color And Return A True Or False
Nov 24, 2008I am looking for a formula to return either True/False in Column J if the font color in Column H is Red.
Is there a formula that can do this?
Change Form Checkbox Fill Color For ALL Checkboxes In Workbook When Checked (True)
Nov 20, 2013I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies View RelatedColor Column Charts Based On Font Color Data Cells
Oct 27, 2009I have attached the relevant spreadsheet for which I need to alter the color of the columns based on Site number ( Sheet 1). % Mortality will be represented in the Y-Axis, and the Site numbers would be on the X-Axis. All columns (% Mortality) except one will be of the same color, and the one of a different color will indicate a specific site. As an example, site 86 is colored differently. The way I require the chart to look is shown on Sheet 1.
After reading through some great posts on Ozgrid, I managed to do this using conditional formatting (Sheet 2), but that sort of falls short because I am required to add a data table to the chart, and the parameter that is indicated by the column bars happens to appear twice in the data table.
I was wondering if this can be automated maybe using VBA, but with the possibility of simply matching the color of columns with the font color of respective entry in the data series.
Hide Checkbox TRUE/FALSE & Sum Values Adjacent To TRUE
Aug 2, 2009I have a worksheet where I have around 300 rows, each with 7 columns. What I want to do is add a checkbox to each column. I plan on setting non-applicable checkboxes to mixed status and locking the worksheet. I will unlock applicable checkboxes and sumif or countif their value according to row-based scoring, for example, each checked checkbox represents a value of 3. I do not know VBA and have chose to use the form control checkboxes rather than ActiveX.
I believe that a formula for this would be something like: =SUMIF(B1:B3,True,"3") or =COUNTIF($B$1:$B$3,True)*3
I am wondering firstly if I have that right and secondly if there is a way to stop my checkboxes from displaying labels. Currently, if I click on one it displays True behind the active checkbox. If I uncheck it, it displays False.
Color Cells Based On Color Of Preceeding Cell
Nov 18, 2007I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.
Macro To Color Cells Based On Their Font Color
Jun 18, 2008I have a spreadsheet that i download from the net daily, which is seperated into columns of information.
I want to be able to look down a column and mark a cell in a seperate column if the cell font text is red.
For example looking down column A ... if the font text of a1 is red then mark the cell background colour of T1 red - if a2 text colour is red then mark the cell T2 red .... etc etc.
If the font colour in a1 or a2 ... etc etc is any other colour then do nothing.
I have 5 columns I wish to look down and mark in 5 seperate columns - I have tried to do this by conditional formating but don't know the fomula for checking font colour.
Multiple True Or False - Sum Of Corresponding Cells
Dec 4, 2013I've got a mega excel sheet right now with multiple people making updates to it on a daily basis. As such I am trying to find a way to output various totals in a separate static table which i can grab at any point and be confident numbers are correct.
The problem, firstly I cant figure out how to have multiple true false formulas checking the sheet from 1 cell. i.e "Check column B True/False for RestrauntNameXYZ + Check column E for true/false GroupABC + check column G for true/false Lunch"
and then
Calculate sum of column A for all rows which above combinations of true/false checks spit out.
Sequential Number For Cells That Have TRUE
Feb 21, 2014I have a column that says either TRUE or FALSE this is dependent on what number i input into another cell, so if i input 8, TRUE shows on every 8th row,
I want the cells that say TRUE to also have a sequential number next to it in the column beside it.
Formula i have: =MOD(ROW(S2)-1,nth_No.)=0
So for example, every 3rd row is TRUE, i am wanting a sequential number beside it:
FALSE
FALSE
FALSE
TRUE 1
FALSE
FALSE
FALSE
TRUE 2
FALSE
FALSE
FALSE
TRUE 3
Link Two Cells If Checkbox Is True
Feb 6, 2013Is there a way to link to cells so that one cell is populated with the others value if a checkbox is set to true?
In other words if the checkbox isnt selected the two cells would be as normal. If checkbox is checked, I want to enter data in one cell and have it show up in the other. I cannot use formulas as I use spin buttons on these cells as well.
I can get it to work with a worksheet change event but that is proving to be more buggy than anything I have ever seen. The worksheet change event is set to one cell but it the code executes if any cell is changed. This has happened before so Id rather not use the worksheet change event if possible.
Formula In To Find The True Value Of Cells
Aug 1, 2006trying to put a formula in to find the true value of cells, i.e.
need the positive value of these cells (into one cell), note below, assume colume A1-A6.
FALSE
FALSE
FALSE
35
FALSE
FALSE
Check Cells In Each Row TRUE/FALSE
Jul 31, 2008I'm trying to assist is working with sensitive data, and for security reasons I am unable to post the Excel sheet here. Here goes:
The user is working with a sheet in which uses checkboxes, and wants to assign values from cells in the same row as the checkbox to corresponding cells in the sheet (not a different book) if the box is checked.
I guess I should just ask what the best way to accomplish this is? I was thinking I need to do an IF test (do checkboxes return TRUE/FALSE?) and then assign values from the cells I need to corresponding cells in the next sheet. The big question for me using this method: how can I use a single IF statement to assign multiple cell values?
Compare Two Cells And Delete Row If Text Is True?
Apr 6, 2014Find the attached : example.xlsx‎
My requirement is compare two cells a1 & a2 if found true highlight a2,compare a2 & a3 if found same highlight a3 or compare a3 and a4 and repeat the same for the entire sheet.
Macro To Copy And Paste Cells If TRUE
Dec 4, 2009I need a macro to copy and paste cells from one worksheet to another, if there is the word true in the column L of that row.
View 10 Replies View RelatedCounting Cells If Special Criterias Are True
Apr 25, 2006I have a worksheet containing appr. 9000 part numbers that have four different columns as: annual volume, dispatch quantity and turn over speed.
I want to count all rows where these conditions are true:
(annual volume / dispatch quantity)>turn over speed
I thought I could do something like this but it turns out wrong:
=COUNTIF((annual volume/dispatch quantity); >turn over speed)
This does not work.
Is there a way that I can do this easily?
note: the " ;" is correct. In my excel I use ; instead of " , ".
Nesting OR, AND Within IF: Comparison Amongst Several Cells And Returning A 1 If True
Dec 24, 2008I'm trying to do a comparison amongst several cells and returning a 1 if true. if D25 is blank or does not equal Yes, Mixed or SP3, and if both F25 and G25 are blank, the output the value 1. First try:
=IF(AND(D21="",D21<>"Mixed",F21="",G21=""),1,"") - This seems to ignore the Mixed and outputs a 1 even if D21=Mixed.
Second try:
=IF(AND(OR(D25<>"Yes",D25<>"Mixed",D25<>"SP3"),F25="",G25=""),1,"") - same as above, if D25=Mixed then value of the cell is 1.
Returns A True Value For Cells With A Month Value Of September
Jun 2, 2009The function below only returns a true value for cells with a month value of September, but not those with December, March or June. Each cell in Row 1 contains a month. A1 = 9/1/2009. B= 10/1/2009 and so on.
View 2 Replies View RelatedCopy Cells When Conditional Formatting True
Feb 14, 2008It brought up my own thread, I didn't realise it untill today, but the answer I been using uses conditional formating to highlight the lowest cells in each row. And as Sicarii pointed out earlier today you can't select a cell my color with conditional formating turned on. can I highlight some other way or can I select cells to copy some diffrent way. This is the VBA I use to select the lowest price.
Sub FIND_LOW_PRICE()
Range("a1:H6").Select
Selection.FormatConditions.Delete
Selection.FormatConditions.Add Type:=xlExpression, _
Formula1:="=and(a1=min($a1:$H1),not(isblank(a1)))"
Selection.FormatConditions(1).Interior.ColorIndex = 6
End Sub
And this is the code that Sicarii supplied and correctly warned me will not work with conditional formating.
Sub COPY_BASED_ON_COLOR()
Dim RngCol As Range
Dim lLoop As Long
With Sheets("Sheet1")
Set RngCol = .Range("A1", .Cells(Rows.Count, 1).End(xlUp))
End With
For lLoop = RngCol.Rows.Count To 1 Step -1
If Range("B" & lLoop).Interior.ColorIndex = 6 Then
Sheets("Sheet2").Range("B" & lLoop) = Sheets("Sheet1").Range("B" & lLoop)........................
Excel 2010 :: Change Several Cells If Statement Is True?
Oct 11, 2013I am using MS Excel 2010 want what to change a number of cells if a value is true e.g.
Row one has the headings Prz, Stat, Val, andPts
Row two has the following values :-
(Prz) a2 =2, (Stat) b2=1, (Val) c2=$30, (Pts) d2=10
How do I do the following in Excel :-
IF B2=1 THEN A2+1 AND C2+30 AND D2+5
so that the above cells are changed to
(Prz) a2 =3, (Val) c2=$30, (Pts) d2=10
Total Percentage Of True Cells Compared To Total Number Of Cells
Jun 9, 2014I have a column with Cells that will sat True or False, the amount of rows will be different every time, I need to work out what the total percentage of True cells compared to the total number of cells. How would this be achieved.
View 9 Replies View RelatedReconciliation Formula(s) - VLookup Two Cells And Return TRUE / FALSE For Match?
Mar 26, 2014 I'm trying to create a rec report, ideally on one page, for multiple criteria. The situation is we get a report on our trade positions (investment stuff) from an outside service we use. We also have a report internally from what we've booked. We're looking to tie out are basic things like price, original par, revised par, trade date, counter-party banks, etc. I've consolidated data from both sources on one page (DATA) where all data points are lined up (say EXTERNAL is from rows 1-500, and INTERNAL is 510-1010). Now I need to create a front page showing the result of each tie-out. The lookup value will be a combination of the fund name + trade ticket number which would almost guarantee a unique ID (fund name XYZ, ticket number 12345 = XYZ12345)
Current tabs on spreadsheet: DATA, EXTERNAL, INTERNAL. I need to add a REC page
Question: What formula can I use to check on each and return TRUE/FALSE? The goal is to have about 8 columns on the REC, each for one of the tie-outs (let's use price as an example.). I know the basic VLOOKUP to return one value, but it appears in this case I will need VLOOKUP to check two matching values based on unique ID XZY12345, compare the price, and return TRUE if they match, FALSE if they don't
Here's something I saw from one of our spreadsheets that I think does the same to confirm counter-party, though I have no idea how to read this lengthy formula.
=EXACT(VLOOKUP(IF(Q2="COMPANY",R2,Q2),FUNDS!$M$1:$N$400,2,FALSE),
INDEX(PENDING!$G$4:$G$3218,MATCH(CP!C2,PENDING!$N$4:$N$3218,0)))
Conditional Or VLookup (Gives True Or False If Text In A Cell Matches Any Cells In A Range)?
Jan 14, 2009I need to create a formula that will give me True or False if text in a cell matches any cells in a range.
For example:
Column A and B have text:
Account
Date
Name
Species
Column C has other and sometimes matching text:
Name
Deal
What formula would I use to find out if all cells in Columns A and B are represented in Column C?
Count Of TRUE & FALSE And Assign 1 To True And Yes And 0 To False And No When I Total The Rows
Nov 15, 2006I am trying to Sum lines of info with "True or False" and "Yes and No". I would like to assign 1 to True and Yes and 0 to False and No when I total the rows. Never tried this in Excel, on Lotus and the formula does not work. I can find and replace, but I would like to be able to use a formula.
View 2 Replies View RelatedExcel 2010 :: Color Fill A Range Of Cells If Specific Cells Not Blank
Feb 7, 2013I am using Excel 2010 and basically i am trying to fill a range of cell with a green color if any value was enter in a specific cells. Example: I would like to fill range: A10:c13 with a green color (regardless of the cells content in this range) if a value was entered in cell C10 or C11 or C12 or C13.
I've tried conditional formatting but unfortunately I'll have to apply formatting for every cell and for a range of over hundred cells is not efficient.
Color Cells Based On Adjacent Cells Being Empty & Add Text
Apr 2, 2008I’m trying to make my life a bit easier, by adding a few macros and formulas to the spreadsheet (Everything was done completely manually before I got here!!!).
What I would like to do is take two columns, which contain a start and end time for work shifts, and colour them GREEN once I have entered a name in the Worker column (Along side the two with the time), and also to fill a cell with a Yes or a No. I’m aware of auto conditioning, and I’ve tried to have a play to get this to work, but I just can’t work it out.
I have posted a link to an image which shows what I want. I hope I've explained it well enough!
http://img530.imageshack.us/img530/6239/excelspfk0.jpg
Color Blank Cells In A Row Between 2 Cells With Specific Number
Jan 31, 2013I have a similar question regarding coloring of empty cells between two cells with specific numbers as posted in below thread : [URL] .....
This is exactly what I want. But here I have some problem with formula.
=COUNTIF(A1:Z1,1)=1
Above formula could pick cell value 1 and color the empty cells in a row between the cells having value=1. But if I want to use the same formatting for other numbers like 2 or 3 it doesn't work.
For example in row(A1:Z1) I have A1=1, D1=1, and F1=2, K1=2, and O1=3, U1=3
I required multiple conditional formatting that could color the cells based on values first from A to D then from F to K and finally from O to U.
I'm using above formatting it works with cells having values 1 but its not working for 2, 3 or any other cells values.
I have already tried replacing 1 in above formula with 2 and 3 but it doesn't work.
Fill Cells Color In Worbook Based On Other Cells
Jan 27, 2005how can I automatically fill cells with certain colors based on the value of the cell. (i.e. I want to search an entire workbook and fill cells with values between 80 and 99 green, 60 to 79 yellow and 0 to 59 red.)
View 9 Replies View RelatedColor Cells Based On Multiple Conditions Of Different Cells
Jan 15, 2008I’m trying to change color in cell B9 according to different conditions in Cell C9 (than on b10 according to c10 and so long until necessary - probably will be around 2000 lines). Since there are more than 3 conditions and in two cases condition depends on the color of the C Column, I can not use conditional formatting. I’ve searched and found similar forums here, but since I’m ignorant in VBA code, I couldn’t manage to make adjustments. So if you can help me with the code, I would really appreciate it!
Condition and Results required would be:
IF column C = “S” than on Column B = color cell light blue with white border
IF column C = “P” than on Column B = color cell Green with white border
IF column C = “A” than on Column B = color cell Yellow with white border
IF column C = “L” than on Column B = color cell Red with white border
IF column C = “C” than on Column B = color cell Dark Blue with white border
IF column C = “ ” than on Column B = color cell white
IF column C = “V” and has white background than on Column B = color cell white
IF column C = “V” and has a Dark Grey background than on Column B = color cell Dark Grey
I don’t know if the last two are feasible.