Read The Number And Check For The First Number With The 2nd Number

Dec 16, 2008

I have this set of number..

987654.

What im trying to do is this..I read this number and check for the first number with the 2nd number. If its greater then i will swap it. Im trying to do this so that my number can be rearranged as 456789.

I am trying to get a SUM function to recognise values within a range of cells, that are immediately followed by a *. i.e. 34*

For each range i need to count the total number of inputs, count the number of starred inputs & add up all the values entered.

Currently COUNT doesn't recognise starred values, COUNTIF is set to count only starred values, and SUM wont recognise the value of the starred values.

Is there a way to only read the number element of an input - there are only integer values & starred integer values. The starred inputs are also conditionally formatted. If there is a way would it then affect the COUNT/COUNTIF element?

The code below is for a Userform to allow data to be entered into a form and than placed into a worksheet. Also this code allows me to edit the existing data in the worksheet and than place the data back into the worksheet when down editing.

The problem is some of the data in my userform are numbers and the userform is reading it as text. When I enter numbers into the userform and than place it into the worksheet, how can I change the code so that the userforms to recongnize numbers not a text?

Private Sub UserForm_Initialize() With ActiveCell If .Value = vbNullString Then With .Parent Set myCells = .Cells(.Rows.Count, 1).End(xlUp).Offset(1, 0) End With Else Set myCells = ActiveCell.EntireRow.Range("A1") End If Set myCells = myCells.Resize(1, 28) End With Call FromSheetToUserform Me.txtTYPE.SetFocus End Sub

Sub FromSheetToUserform() Dim myData As Variant

myData = Application.Transpose(Application.Transpose(myCells.Value)) If myData(1) = vbNullString Then myData(1) = Format(Date, "Medium Date")

This does not seem to be working for me. I need to check one number against another and if the one cell is larger then the other subtract it or just the reverse.

I have a list of numbers that I have to concatenate with another number depending on if it falls within the parameters and I don't know how to do a lookup on that. I currently am using a complex if/or/and statement which is too dificult to debug and extremely complex like this: if(OR(AND(a>=1,a<=10),AND(a>=20,a<=30)),concatenate(a,"123"),if(OR(AND(a>10,a<20),(a>30,a<40))),conc atenate(a,"456"),"a is not in the parameter")

is there a way to do a lookup for this?

Something else to throw into the mix, there are some ranges that shouldn't be there and return nothing so from 40-55, there shouldn't be a result.

also, there are some that are just one number (56 gets 789 but then at 57 it goes back to abc)

I'm writing a function that sums the values in a range of cells but some are errors due to my formula's. any way i can check if a value is a number in VBA?

Is there way in Excel VBA to check if a string contains a number, and then return TRUE or FALSE. Numbers can been anywhere in the string. See example below.

Then I have other data which provides a Group ID and a product number, which number is likely to between the Low# and High# in the data list.

What I want is a formula to check whether the product number is between the Low# and the High#, AND that the Group matches.

Example: the data being supplied is Soap 28332. So, I want a formula to check through the data list, and if 28332 is between the Low# and the High# AND if the group SOAP matches, then give back the correct ID number.

Thus for the data Soap 28332, I would want the answer to be 1003, which is the ID # for soap in the given range.

A data listing of Food 73776 should give back the ID 2005, etc, etc. This list of data needing the correct ID# is thousands of lines long.

Thus I need a formula to check that the given number is within the low and high #, and that the group designation matches. If so, then give back the correct ID#.

I need a formula that will calucalte the monthly total based on the following conditions:

Col A = Yearly Cost Col B = The number of the month when the costs are starting (1=Jan etc) Col C = The duration or the number of months for which the costs are to spread Col D is Year 2013 with the months across columns D-O. Row 1 above those columns shows the month's corresponding number.

Right now I have =IF($B3<=D$1,$A3/$C3,0) however if my start month is 1 and my duration is 5, I need the costs to stop after May. I've attached a sample file. Calculate based on start month and duration.xlsx

I have an excel database where I register cases. I have in it a button that creates a folder with and ID nr that is in column A (I create new ID nr in the next row, when I press the button it will create a folder with that ID nr and inserts a blank word document in it). We have a template that we copy to the folder (depending what type of case). The idea would be that once the template is filled in and ready to print, It would take the values from the ID nr and a reference number a few cells to the right. Is it possible to tell excel to open the word document in the folder and create a PDF version with the ID nr and reference number. (there are only 2 templates, so the macro would have to look for one of the two in the folder) The names of the templates are: "Standard" and "Other". I guess the best way to start maybe this would be that I select the cell with the ID nr and then press a macro button to have this done. One thing that needs to be done, is to put a copy in the same folder and another in a second folder called "Binder" in my documents folder.

I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.

I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.

I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.

Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:

How to create a spreadsheet with what I think will be a very simple formula?

If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2. If date in B2 - date in A2 is 7 or less days but more than 1, put a 2 in cell C2. If date in B2 - date in A2 is 30 or less days but more than 7, put a 3 in cell C2. If date in B2 - date in A2 is 90 or less days but more than 30, put a 4 in cell C2. If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.

OR

Another, maybe simpler, way of saying it is:

If date in B2 - date in A2 is 1 or less days, put a 1 in cell C2. If date in B2 - date in A2 is 2-7 days, put a 2 in cell C2. If date in B2 - date in A2 is 8-30 days, put a 3 in cell C2. If date in B2 - date in A2 is 31-90 days, put a 4 in cell C2. If date in B2 - date in A2 is 91 days or more, put a 5 in cell C2.

I have a spreadsheet listing all my vehicles and their respective oil filter part number. Now, some vehicles share the same oil filter and I am trying to find a way to return the vehicle description when using the filter # as a value. In my example below, I am looking to fill the third column with the Vehicle that also shares the same oil filter number. i.e. in the Dodge row, toyota would appear in the third column and vice versa in the Toyota row.

Vehicle Oil Filter # Also used with Dodge 51515 Honda 54565 Toyota 51515

I am not well versed in excel lingo which is probably why I have a hard time coming up with a method that works.

I'm making a Excel 2013 spreadsheet that has formula in a column that auto enters a number 1-40 when something is entered to the left of that cell. There are 300 rows in the spreadsheet. I would like to make a drop down list in a column cell to the right that would delete that number in that cell from the drop down list. For example cell C1 has 39, that 39 then is deleted from the drop down list. C2 has 22 in it, click on the drop down list cell and it shows 1-40 less 39 and 22.

I have a requirement where I want my list should auto increment with number only.

For example: I want to fill below text in cell and when I drag the cell( Along the column A) and fill the rows downward it should automaticallly incremented.

Data in one cell say (A1) is like 001_TCO_CM, now I want to drag data present in cell A1 and wants data in cell A2, A3, A4 etc... it should get increment like

A2 = 002_TCO_CM

A3 = 003_TCO_CM

A4 = 004_TCO_CM

and so on...any method or way present in Excel 2003 so that my series should get auto filled.

For this example, A1 is the given at 19.875 I am trying to get A2 to net a result of 19.5. A2 is to net that result by searching through cells B1:B14 and finding the nearest equal or lower number. If A1 is less than 13.5 a result of "error" should be generated in A2.

I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?

I wrote an excel program in Excel'03 for a dental office to manage state assistance patients and one of the table columns is the state assistance number. The problem is that the program defaults to a number format when it is entered instead of a text format, which is what I want. The issue is that state assistance numbers are always 8 digits and when it defaults to a number field the program drops the required preceeding zeros.

For example the number 00123456 will sometimes show up as 123456, which is wrong. It's like sometimes it will show up right and other times it gets a butterfly in its brain and deletes those zeros irritating the receptionist here. So, how do I get the table to either stay in text format or set up a number format that keeps the preceeding zeros?

How can I drop the whole number part of a number and leaving only the decimal part of the number. Then multiply the decimal part of the number with a number. Then repeat this in a sequence. The object is to convert Lat and Long decimals to Hr. Min. Sec.

I am working on a concrete pour summary, I would like to have the specific codes on each tab be affected from one summary page. So when I enter a certain number on sheet 1 , it will affect that same number section that is on a different sheet. It will be adding a certain amount to that code section every time its entered. What functions need to be used to make this work..?

I work on a daily basis with spreadsheets in excel. The number of columns is the same, but every single spreadsheet has a different number of rows. I recorded this macro in a table with 1196 rows and I would like to use this macro also in other tables with a different number of rows.

Items in Column A1 are calculated by (B2/4+5)*1.4 Items located under the columns 2000, 3000, 4000, etc... 10,000 are calculated by taking the top number, eg 2000/(A1 cell value)+the column B number. 2000/7+0 = 286 (rounded numbers)

I need to find an way to look up for x number (2000,3000,4000, etc...) find the smallest number in that column and then return the value in column A1.

Cell A1 Number >2000300040005000600070008000900010000 70 2864295717148571000114312861429 84 24236148059971883795610751194