I am looking for a time saver macro,pretty easy to make i guess,as the theory is not difficult...but i am too newbie to make it. So i have an xls that has like 20k lines on Column A!And i have to seperate the numbers. I count the first 4 digits and I have to do it by adding a cell between them.
Example :
27289802
27289902
27289915
27289915
(add a null line)
27290202
27290302
27290316..................
See the code below. It works fine but in the report that gets printed off, it doesn't display grid lines and line numbers .
[Code] .........
I have a column that looks like the following and I need to add the numbers:
27 skids
31 skids
56 skids
13 skids
The unit "skids" is constant. The answer I am looking for is "127" or "127 skids"
I have the following list of names, phone and radio numbers that somebody put together all in one cell. Formated as General with Word Wrap.is.
View 9 Replies View RelatedI have column of cells containing entries such as V1, V3 and V7. I'm trying (and failing) to come up with a formula to separate the numbers from the letters and add them together: V1, V3 and V7 would together give 11.
I can use the MID worksheet function to separate my numbers from my letters on a row-by-row basis, but I can't work out how to do the whole thing in one fell swoop. =SUM(MID(A1:A10,2,2)) doesn't work, for example.
This is what I am using:
=VLOOKUP($A5,TEAM!$B:$MZ,23,FALSE)
When I select the cell formula extension button thing and drag it to the right, the formula copies exactly into the next cell. If I select multiple cells starting from 19-23 and then drag, excel just repeats the formula over, (19, 20, 21, 22, 23, 19, 20, 21, 22, 23, 19, 20...) This is seriously frustrating as I have to click into the formula bar on each cell and change the value of the column lookup.
I can't keep going manually as I need to go to about 300 cells...
i have data stored like:
col1
XXXX1244 50
XXXX1519 60
XXXX1244 50
xxxxx1111 10
xxxxx1519 65
the last 4 caracters are numbers. I need to test these numbers and sum the corresponding values them in a single cell without adding new column(SUMIF like).
so in the above example I need to sum all ending at 1244 or 1519, therefore the sum showed in the single cell equals 225
to extract from a single cell: =VALUE(RIGHT(D8;4))
I tried to use an array formula but it seems to crash if a blank cell is in the array
Attached file where i m not able to split data in seperate seperate coloumn
View 3 Replies View RelatedI have a large number of customers listed in an excel sheet that may recieve a visit from my organisation. The reason for the visit may vary and sometimes a customer may recieve more than one visit. Each Row (or record) maps to a customer. Each column has a visit type which I insert a date in to say when the customer has been visited.
I am looking for a function that will return if a customer has been visited or not. As dates can be summed like numbers I am currently saying in the "Visits Recieved" column =if(sum of dates (visit type colunm) >0, 1,0) Then I simply sum the column to get my answer of how many csutomers have been visited.
In a column "V", when the user enter "Y", i need to copy the entire row to another sheet("Written-off"), its working fine.Sometimes the first 2 columns of that entire row where the user enter "Y" may be null, so using my code, copy first entire row where user put "Y" and paste to another sheet("Written-off"), then user also enter "Y" to wherever in "V" column, this time the entire row should overwrite the last row in the "Written-off" sheet.
I found the reason is first column of the last row was null, so when check the first cell, if it is empty then the next entire row should be copied that area.
Is there anyway to check first 2 cells of the last row in a sheet in null or not?
If Right(Left(ActiveCell.Address, 2), 1) = "V" Then
myColumn = "V"
If Intersect(Target, Columns(myColumn)) Is Nothing Then Exit Sub
On Error GoTo last
If UCase(Target.Value) = "Y" Then
Target.EntireRow.Copy Sheets("Written-Off").Range("A" & Rows.Count).End(xlUp)(2)
Application.CutCopyMode = False
Sheets(Sh.Name).Select
Else
Exit Sub
End If
I'm having a problem with a seemingly simple formula I can't quite figure out. I need to search through four cells, M(n)-P(n), to find out if they have a value in each cell respectably. When the values are found I need them to form a make shift column in which the three cells underneath the cell with the formula are filled with any available values.
For example:
John Smith has the values: 1 in col M, 2 in col N, 3 in col O, and 4 in col P. That is of course ideal and I would be able to fill in the other cells very easy. But in my case John Smith has values: 1 in N, and 2 in P. Or whatever other order you can think of. I wrote a formula that looks like this:
=IF((M2="")*(N2="")*(O2=""),P2,(IF((M2="")*(N2=""),O2,(IF((M2=""),N2,M2)))))
This seems to work if they have a value in column M, but if for instance they dont but have a value in column N instead, it doesn't produce a result. Could someone give me some advice to what I am doing wrong? I am still new at writing formulas, so I'm sure there has to be some function I don't know about that would make this a lot easier.
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies View RelatedI'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
I am trying to recreate the screen grab that I have copied and pasted in (purple bar chart). I am to create the bar chart, but I am unsure how to create the dotted line which is the national average.
View 3 Replies View RelatedI would like to insert a line if a cell contains something. I get it to work in a macro with this:
Code:
Sub insert()
If ActiveCell.Value = "*" Then
ActiveCell.Offset(1).EntireRow.insert
End If
End Sub
But if i want it to do this in sheet change it doing nothing
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If ActiveCell.Value = "*" Then
ActiveCell.Offset(1).EntireRow.insert
End If
End Sub
I have a large worksheet that has one column that contains cells with either numbers, text or in some cases Nulls. Can anyone help me with some code that would loop through all the cells in this column and when it encounters either text (any text) or a null change the cell value to 0 (Zero).
View 10 Replies View RelatedI want to search a range set in column a. from a1 to a200. When it finds a cell that has some sort of value in it (for example cell a29) i want it to take what is in cell a29 and set sell z1 = to whats in a29 and then continue searching for other cells that are not null in column A.
View 3 Replies View RelatedI have some data in Cell A1 and B1, I want that data in combined in one cell but in diffetent lines.. For example if i have 123 in A1 and 456 in B1, I need it to show the result as below in C2
123
456
I use the Subtotal function to sum several columns during the subtotal function. I dont think I can run a subtotal doing the sums and counts. Is there any way to add the number 0f rows in each subtotal? Count? I'm not sure how to go to each blank row (subtotal line) and count/add the number 0f rows in that subtotal?
View 4 Replies View RelatedI need to add extra text line in textbox by Toggle Button or checkbox. The problem my extra line every time I select it makes extra lines
View 5 Replies View RelatedI need to be able to paste information into excel and then get excel to read the characters to 50 and then move the other info to another line and do the same command again until it has read all the data and put it in lines of 50.
View 9 Replies View RelatedThe attached file receives information from another program in cells A2:D2. It then carries out a copy/pastespecial, and then does a copy insert. The script is supposed to update when new data enters the cell, however it keep adding an additional null line. Does anyone know why this is or how to fix it?
View 2 Replies View RelatedI am having difficulty trying to solution this:
Row 1 = Dates e.g. 1-Mar - 31-Mar
Row 2 = Day of Week e.g 1-Mar(B1) = Sat(B2) through 31-Mar ending at (AF)
Column A has hourly time intervals
A3 = 0:00
A4 = 1:00 etc to 23:00
Numbers fall into cells by date/day and interval up to today 10-Mar
What I am trying to do at is average the days separated by Weekdays and weekends..so the formula at AG for interval for weekday would be =AVERAGE(D3:H3,K3:O3,R3:V3,Y3:AC3,AF3) weekends (Column AH)would be =AVERAGE(B3:C3,I3:J3,P3:Q3,W3:X3,AD3:AE3)
I want to average the weekdays and weekend numbers without having to group the weekdays and weekends in a custom sort in the final column. That way when I add the data every day, it auto calculates in AG and AH. If I do it as it shows above, the AVG is skewed due to the blank cells.
Attached a sample worksheet.
what formula to use when my formula does not determine any data (N/A) in a cell in order to count and use count number to determine annualized % change.
State 2002 2003 2004 2005 Annualized Change
GA 36.8% 37.1% 45.5% NA 4.4%
=SUM((C4-B4)+(D4-C4)+(E4-D4))/3 (here is my formula)
I'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?
If Range("I3") Temp Then Range("I1") = Temp
Creating a macro. Need to delete records in column D from the first blank cell. 1st blank cell variable.
View 9 Replies View RelatedThe problem that I am having today is defining a range object that cannot include null cells. If it does include Null cells then the filterwill fail. the cells that I need to define are all in a cohesive unit. the other thing to know is that the cells that are not null will never be mixed in with cells that are null. so for instance you might have a range of cells from one to 100, the first 50 might be full. the last 50 would all be null. in that situation I would need to loop through those cells to define a range object that would just see the first 50 cells ....
View 6 Replies View RelatedI want to do a simple Sum if. My range is simple and so is my criteria, but the actual range of cells to sum is not in one continus row or column. Can I do the sumrange as seperate cells?
View 3 Replies View RelatedI want to a horizontal line in a chart. There are only two figures with me. One I want to display as a column chart. The other as a horizontal line chart. (I can use both excel 2003 or 2010, whichever is suitable)
View 2 Replies View RelatedI am using the following macro to set print area which I found on the net. I am trying to modify it as I would also like to place a border line on the bottom row but cant find anything to assist me despite searching through several threads.
Dim myrange As String
With ActiveSheet.Range("A:A")
myrange = .Find(What:="*", After:=.Range("A1"), LookIn:=xlValues, LookAt:=xlPart, _
SearchOrder:=xlByRows, SearchDirection:=xlPrevious, MatchCase:=False).Address
End With
ActiveSheet.PageSetup.PrintArea = "$K$1:" & myrange
End Sub
