I have an excel file which consists of old name and new name in two different columns. I have 500 photos in a folder. I want to rename the photos with the new names when there is a match with the old name(same as that of image name) in the excel.
View 4 RepliesNow iam Working in excel 2003, I got a Requirement that, After Downloading datas From SAP, It Directly Stored in Excel Sheet , Using tht Sheet1, I need to rename all the Filenames at a time, Is It possible, Any code is there to rename,
For Example,
From SAP to Excel Sheet Datas are Like this in Sheet1,
DmsNo Filename
50007685 SDFFG.jpg
50004678 HGJKID.jpg
50003421 VGFTHR.jpg
Then i have rename that filename, rename 'SDFFG.jpg' To '50007685.jpg', and it Should be directly rename to my Source File.
For Example:
Source File: C: estSDFFG.jpg
After renaming it Should be,
Source File: C: est50007685.jpg
any code is there to rename,
I have a list of items in an excel sheet... 500 of them... and there are images for them in an other folder... The problem is those images are in 1000's and I only need those 500 images.. Images are saved as "SKU.jpg eg NS2354.jpg and we have an SKU column in excel as well .. SKU and their images have same name...
Is there any solution to pick up only those 500 images from those thousands of images?
Is it possible to save those 500 images in an other folder?
I have an excel file (2003 version) with one sheet called sheet1.
On sheet1 I have multiple text boxes, however each text box has the same text box number "Text Box 1244" (this number appears in the top left-hand side in excel when I click the textbox).
I was wondering if it's possible to rename the text boxes based on their location on the sheet.
Eg. If i had a sheet with 5 rows of text boxes and 3 columns of text boxes (15 text boxes in total).
The top left-hand box gets renamed to "Text Box 1", then the text box below that gets renamed to "Text Box 2" and so on to the bottom of the sheet to "Text Box 5". Then the vba script would move to the text box that was to the right of the first text box (1st row again but 2nd column), and rename all the text boxes in that column ("Text Box 6" onward).
The outcome would look something like:
TB1 TB6 TB11
TB2 TB7 TB12
TB3 TB8 TB13
TB4 TB9 TB14
TB5 TB10 TB15
I'm stuck on this problem a while now and cannot find any scripts to solve it. My VBA is non-existent, I usually get by on bits of code I find on the web.
I hope each textbox has a hidden co-ordinate associated with it, then it might be possible to loop through all the textboxes based on their positions and rename them.
I have several (around 35) CSV files that I download regulary. Is there a quick way to rename all the CSV files in a given folder based on adding "Update_" to each file name.
E.g Say two of the orginal files are called:
Monday.csv
Tuesday.csv
I'd like to run some kind of macro to rename them to:
Update_Monday.csv
Update_Tuesday.csv
Every week I get a folder full of files and I have to rename them with a week ending date...Below is what I hacked together, but it's not working...
Sub Rename()
Dim OldName, NewName, npath As String
weekendingdate = InputBox("What is W/E Date??")
npath = "J:Test*.pdf"
While Smith ""
OldName = Smith: NewName = Smith & weekendingdate
Name OldName As NewName
Wend
End Sub
I have a system that creates text files once a day in a set folder. I want to have a VBA script that will combine all text files in the folder (C:Daily Folder) into one text file (Full.txt) using a simple cut/paste addition, i.e., the lines from the second file are added after the lines from the first, the lines of the third after those, etc. The order does not matter.
I know there are other threads about combining text files and I'm sure I can figure that out if need be, but the problem is the system creates these files by adding .XXX to the name, with XXX being the file order number. So after 4 days, I have four files named K2500.001, K2500.002, K2500.003, and K2500.004. Windows reads these as being four different file types (.001, .002, .003, and .004). If you click on one of the files, Windows prompts you to associate it with an application. I've tried shell commands such as ren *.* *.txt , but the use of a "." in the file name seems to be a problem. Is there a way to change all "." to "-"? I've tried some PowerShell scripts there that haven't worked. I'd like a VBA solution because I don't know my butt from a hole in the ground when it comes to shell programming and so that it can be added to my VBA script for the Full.txt file.
Maybe the files don't need to be renamed at all--like I said, the end goal is the Full.txt file in C:Daily Folder that contains all the lines from the daily text files.
Column A, has image file names. We want to insert corresponding images in Column B
The images are in a folder. We would like to know if there is formula/procedure which will lookup the filename and grab that image from the folder and insert into Column B. The images size in the folder are 500x500 pixel, we would like the inserted images to be reduced to 30% of the original size.
I have an excel sheet where column B has a list of product codes. I also have a folder with pictures of each product and file name of the pictures are the product code. I would like to place the picture of each product in column A beside their respective codes. If possible, I would also like to reformat the pictures so they fit in the cell. (3.00 x 3.85)
Need a Macro that can run this.
I have an excel sheet where column "B" has a list of style numbers . I also have a folder with pictures of each product and file name of the pictures are the product code. I would like to place the picture of each product in column "A" beside their respective codes. If possible, I would also like to reformat the pictures so they fit in the cell. Size= (3.00 x 3.85)
I want to be able to press for example :CTRL Q and all the the pictures will pull from the folder on my PC and populate in column A next to their respective style # in column B.
I have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"
Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.
I am stuck however referring to the previous sheet to update the date value in "A1"
I have a folder in my D drive where I used to keep my Text files after downloading it from our support centeral. I want to Import all these Text files in one excel sheet in a way that data of each file got append in excel sheet below previous file data.I am trying to do this through FSO but unable to do the same.
View 1 Replies View RelatedI was wondering if anyone had any code to loop through every file in a folder and list the file name along with every sheet name in that file? I'm using Excel 2007.
View 4 Replies View RelatedI am working to make an automatic result card in which excel automatically gets data of every student which is present in sheet within the workbook by simply writing roll number of the student in a cell. and i have done it easily by Vlookup and index functions but the only problem i am facing is, that i want to show the picture of each student by roll no. pictures are in one folder on my hard drive, now i want that as the roll number of the student is written the result excel should display the picture (from the folder, each picture named by roll)of the student. for example i write 1234 in roll no cell and want to get and show the picture no 1234 in another cell. (from the folder)
View 2 Replies View RelatedI have a VBA Code which executes SSIS Package. Before executing that package i need to open the excel sheet saved in C:SSISPackages and rename sheet "SSISP"and then close the sheet..It will not be sheet1 but someother names(cannot guess)..
View 6 Replies View RelatedI got a workbook containing a worksheet called APheb1.
I would like to create a macro that would replicate this worksheet and rename it APheb2, APheb3 etc... till a number i specify. For example if i specify 90, then it would replicate APheb1 90 times till APheb90.
I have recorded a macro that replicates the file but i cannot find a solution for the renaming part.
I am putting together two reports that involves a lot of photos (we're talking about two thousand each). I have figured out how to add the images to comments thanks to other posts on this site, but is there anyway to make this more automatic?
I found this code below, which seems to apply, but I just don't know enough about VBA to make it work, my only experiance with code is Flash's actionscript.
http://blogs.officezealot.com/charle...9/27/3019.aspx
I need to declare an event that happens when a worksheet is renamed
the code that would trigger the event is
I have the following code to move/copy worksheet and then copy and paste
special values. Is it possible during this process to get the user to change the 'moved' worksheet name ?
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
I need a macro in a workbook to look at all the files in the same folder that have "*att*.xls" in the name and determine and copy from the range A15:W515 only the rows that have data in at least columns A, C and D. Each file will vary as to how many rows there will be and there are more than the files with "*att*.xls" in the folder. The data will be on the only worksheet in each file and the worksheet is named "G2WAttendee_xls" the data from all the files need to be copied to the file called "Consolidated webinar reports.xls" (I am using Excel 2003) and to a sheet called "Attendance Data" and added to the end of the last paste.
At the start of the macro the current file "Consolidated webinar report.xls" should be saved to a sub folder of the current directory and have the date saved added to the name. The sub folder is called "Completed reports". The data in the original file on worksheet "Attendance Data" should be deleted.
At the end of the process all the files that have had data copied from them should be moved to the sub folder "Attendance reports consolidated" (This could be done as each file is closed if that is easier).
I have headings in row 1 of the "Attendance Data" worksheet that match the headings in the various files in the folder (which will always be in row 14 of the individual "*att*.xls" files).
The folder with all the files and the "Consolidated webinar report.xls" file is at path "Z:P and S MEvaluationsWebinar series 2012-13TB".
I am using some code to loop through a folder and extract some data from a specific sheet.
Now say a user moves the file to another folder etc... The macro will pull up an error, now is there a way i can have it dynamic linked to the spreadsheet so no matter what folder it gets moved to,
My folder path will adjust to that or need to take another route?
I have been presented with an excel document, with image names in one column (e.g. 832005_001), and hyperlinks in another column [URL]
My goal is to export the hyperlinks in the excel document into a folder as images with the corresponding image names. Is this possible to do without manually opening each link and saving it in a document, and manually renaming each picture in accordance with its image name? (as there are over 4,000).
I have 200 rows of data, each row is associated to an image. I woud like the filters to recognize that the image is associated to that row. I know that image is not "strictly" data. Does anyone know a way to do this?
View 3 Replies View RelatedI need some code that will loop through all the images on a spreadsheet, and change the properties so the images will "Move and Size with Cells"
View 2 Replies View Relatedi want to create folder depending on cell value a1 select data from a1 to h20 save this as "b1 value.xls" my saving directory is c:
eports"a1value" ....
I have an Excel (.xlsm) that opens an existing PPT and uses VBA to modify several slides.
There are several shapes on each slide and my .xlsm has VBA that modifies those shapes.
(The slides have designs on them for different size business cards which get filled in with spreadsheet names,...)
Now I want to "select all" the shapes on a slide as a "group"(not sure that term is correct). Then I want to export that group as a .PNG image file. Save location can be the same folder location of the .xlsm file (doesn't really matter).
This is different than exporting each slide as a .PNG.(which I can already do). In this case the business card designs on each slide are different sizes. So I need the images to be just the size of the "group" on that slide.
The VBA code is within the .xlsm file (not the PPT)
Several posts show VBA code for within the .pptm file that works fine if using just a PPT
However that code doesn't seem to work when I put it in the .xlsm file to drive the image creation from Excel.
PC with latest of all software.
I've encountered another error when trying to run this macro to extract images from a spreadsheet. As the macro is running during the process it has stopped and I get the runtime error "1004": "Methid "Publish" of object "PublishObject" failed.
When I Debug it highlights the text below.
Sub Test()
Dim Folder As String
Dim Pic As Picture
Dim FileName As String
[Code]....
Alternatively if I click "End" it opens an extra excel window and displays an image from the original sheet. With the workbook labelled as the product code.
I am trying to rename a chart in Excel 2013, but it keeps reverting my names. It looks like there might be a 32 character limit on the name length, but I cannot find any documentation supporting this.
In case it's not clear, I'm trying to rename a chart from Chart38 to "Productivity - Tractors CY/OP - Month", but once I press Enter, it changes back to Chart38. If I can shorten the name to less than 32 chars it seems to work, but that will be nearly impossible for some other charts.
I have an excel file which contains 9 columns. Column A contains an article number i.e 12345 . Column B contains name of the product. Columns C and D contain Description and Specifications respectively. Columns E,F,G,H and I contain URL:s of images.
I want to do following.
1. Download all the images in a folder on my harddisk.
2. Copy the text in column C and place it under the text in column D.
note that I am a novice at excel and have never used macros/Javascript/VBA/etc