=LOOKUP(9.99999999E+307,K252:EJ252) returns the last entry in the row. What returns the first one? I get the feeling this is simple, Row has blanks, first entry may be in any column.
View 3 RepliesI have created a worksheet with different validation rules for different columns for users to enter data. Is there a way I can make it so each cell must be filled in? I don't want any blank cells. Is it possible to create some so that the user must fill in the cell before moving on to the next cell.
We're trying to use one template to enter data with users being able to start entry from a number of different starting points. this changes they way the look-ups have to work. The attached sample explains it a whole lot better.
View 2 Replies View RelatedI am trying to basically search for the last non zero entry in a column and then return a value in the same row as that last non zero entry.
For example:
My first column of the table is time, second column is submission/marking of coursework (denoted by +1 & -1) and the third column is the number of courseworks awaiting to be marked. My aim is to search the third column for the last non zero value then return the time (from first column) that last non zero value appears.
I have an data in a columns. Here I need to count the non-blanks and blank records.
View 5 Replies View RelatedI have a percentage in R3.
If I make an entry in D13 then I want the R3 to be duplicated into C27 otherwise C27 should be 0.
I am having a sheet where I keep track of when online surveys have been sent to users. The users enail address (column K) may be on the list for several times, but I need to make sure that there is at least a 7 days pause between sending the first mail and the second, depending on the visit date (column G).If there are less than 7 days between two entries with the same email address, the user is not qualified for taking another survey.
I was thinking to write an IF formula which returns either 1 or 0 and then let conditional formatting highlight and HIDE the row via a VBA loop.
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI used a form with textboxes for data input for one of my vb macros. Currently I have the private sub from the form transfer those entries to a remote cell on the spreadsheet, (like in column "HZ"), so that the macro that will actually utilize them can retrieve them. Is there a way to pass that data directly from what is entered in the form in the textboxes to the macro that will actually use them?
View 4 Replies View RelatedI am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
say sheet 1 has 2 collums A & B
collum A is Names Collum B is Dates
A B
Bob Fenton 05/04/08
Rob Smith 05/06/08
Al Feth 05/08/08
Al Feth 05/18/08
Al Thomas 04/23/08
Rob Smith 05/23/08
Bob Smith 04/22/08
Bob Fenton 05/15/08
Al Feth 05/10/08
sheet 2 has unlimited collums in collum A is the name of the person in collum B to Z (or more) i would like a fomula that will search sheet 1 and return the dates for each entry of that name.
so sheet 2 would be like ....
i have an address that is all in one cell displayed like
101 hampton Court, Hampton heath, Hampton Town, Hamptonshire, HA01 1AS
but i need to have it split in to individual cells so
Cell A1 would be 101 hampton court
B2 Hampton Heath
C2 Hampton Town
D3 Hamptonshire
E5 HA01 1AS
each part of the address is split by a comma, so i have tried to use that as a identifier as to where that part of the address is, but failed on that, i can separate out the first part and the post code with a find and replace but not the middle.
also i need it to work backwards ie
it finds the post code first,
then the county
then the town
as those 3 are always the last 3 parts, but the address could only have 1 line of addres beofre the town or 3, and it would get messed up as all the post codes, county ans town needs to be in their respective columns
Doing an IF statement. To perform for cell that are blank is " ". How do you peform the equivalent for non-blanks i.e. any data at all.
View 3 Replies View RelatedThe following the code from the macro recorder. Is there a better way to execute this task in proper VBA code?
How do you add an [If...Then] critieria when 0 or 0.00 are not found, then continue to search for the next criteria, Non-Blanks?
I have 2 more questions within this .....
I have a range I would like to select but this includes blanks. I would like the VB to skip these blanks and find the last value / text in this row and then select that entire row.
Here is part of the code I have:-
I need to create a macro that searches for blanks in column G, from row 2 to the last row of the worksheet, and then inserts the value 1 in these blank cells.
I have been copy pasting different solutions from this site and amended them a bit, but my excel skill are not sufficient for this.
In order to produce my report I am trying to use a MACRO:
I have a column of data in row AZ. I do an AutoFilter for BLANKS. Then I want to put the word "non-base" into each blank cell in column AZ. I put the word "non-base" into the first row in column AZ. I then try to copy down the "non-base" to the end of the filtered data (all the blanks). I have tried to double click, I have tried to do CTRL End DownArrow but it just goes to the end of the spreadsheet instead of to the end of the filtered data.
I have copied the data and then held down the SHIFT key in the last cell and pasted in the data. This works but when the new data comes in, the following week, the number of blanks will be more or less than the last weeks data and my macro fails because it may or may not get ALL the data.
I need to get to the LAST BLANK CELL OF FILTERED BLANKS EACH TIME, replace the Blanks with "non-base" and have it do it consistantly.
I have this code that checks for cells that "" and then transfers a range to a separate sheet. I am running into problems if in the specified range all cells are "". How can I update this code to allow for all cells in the range to be "" without giving an error?
Sub Search_Notes_Main()
Application.ScreenUpdating = False
ActiveWorkbook.Sheets("Analyst Main").Select
Dim ConstantCells As Range, Cell As Range
Set ConstantCells = Range("B11:CX11").SpecialCells(xlConstants)
For Each Cell In ConstantCells
If Cell.Value "" Then Cell.Select
ActiveCell.Offset(-2).Range("A1:A4").Copy
ActiveWorkbook.Sheets("Notes & Ticklers Upload").Select
Range("B22").Select
I have numbers in Column A starting in row a1. Is it possible to fill the blanks with the preceding data with a macro? approx. 1500 rows
Before
a1:62700
a2:
a3:
a4:
a5:63000
a6:
a7:
a8:
a9:64000
After
a1:62700
a2:62700
a3:62700
a4:62700
a5:63000
a6:63000
a7:63000
a8:63000
a9:64000
I am after a formula that will calculate the blank cells since the last cell with a value in it.
Eg. I'm putting the formula in Column AW and have values in AH & AR and want to know the number of blanks since the last value which should be 4 in this case. I will need to copy this from row 1 to row 1000.
I'm currently working on a macro that looks in a column for non blanks.
I want it to check column B and I want it to paste any non blanks (numbers) to column C in the same row. Also, I don't want it to replace any values in column C with any blanks.
Here's what I wrote but it doesn't seem to work.
Sub rankthis()
Dim myCount As Integer
myCount = WorksheetFunction.CountA(Range("A:A"))
For Row = 1 To myCount
If Cells(myCount, 2).Value "" Then
Cells(myCount, 2).Copy
Cells(myCount, 3).PasteSpecial Paste:=xlPasteValues
End If
Next Row
End Sub
I'm trying to use Data Validation for cells. In these cells I only want a Y or N entry and cannot have blanks. I'm rusty on formulas.
This is what I've come up with
=IF(NOT(ISBLANK(B6))*OR(B6="Y",B6="N"),"TRUE","FALSE")
I am using a simple SUM formula like this, =SUM(D10:E10). I would like for the SUM cell to be left blank until a value is entered into the cells D10. Currently it calculates the SUM as 0.
View 13 Replies View RelatedI work in school which for example offers 20 courses for every student. Therefore I have a spreadsheet which has students name in A and B then the 20 courses spread from C to V.
Each student will study 3, 4 or 5 of the courses and will have value in the corresponding column (their teaching group) the rest of their row will be blank.
For each student create in columns X, Y , Z, AA and AB I would like to be able to pull from the 20 courses those which the student studies. Therefore finishing up with C to V hidden and just the student names and the 3, 4 or 5 courses they study.
Any ideas? if one method is to get them into one cell how do I get them into the 5 columns; i know DATA : Text to Columns but won't have anything to Delimit it with and can't use Fixed width as students will study subjects with different length charactors.
I have an array that includes blanks in it. What is the formula to use to output the array of values without the blanks? Example: I have an array (Cells A1:A10) with thirty blanks within this 10 cell array. I wish to have the list of non-blanks outputted, presumably to the next column (Column B).
Array A:
Joe
Stan
Bill
Bob
Jill
Jack
Judy
I need to sort a dataset by a column that may sometimes contain blanks. I'm sorting by time in decending order however excel is keeping any blank rows at the top.
Is there a way i can sort the column decending but keep the blanks at the bottom?
How can I minus 1 from this COUNTIF. Basically counting non blanks - but it keeps counting the title as well, even when i change it to start at row D2 (it just jumps back to D1 next time). =COUNTA(RAW_DATA_2!$D$1:$D$215)
View 4 Replies View Relatedhow to set the format of a cell such that it will automatically add trailing blanks to the data entered into that cell while fixing the number of characters that could be entered into that cell?
View 3 Replies View RelatedI have a formula that needs to return blanks as blank and 0s as 0. The vlookup formula will return blanks as 0, or I can make it return a blank whenever it is zero (below), but some cells may have a 0 record that need to return 0s, not blank.
Right now I am missing a few records that are entered as "0". I have:
=IFERROR(IF(VLOOKUP(O16,'Sheet1'!$A:$Z,8,FALSE)=0,"",VLOOKUP(O16,'Sheet1'!$A:$Z,8,FALSE)),"")
I am using below code to filter my data.
[Code] .......
I want filter data with blanks cells.