How can I separate a text or a number. For example in column A I have a data written like these 123text, text1234, 123text123, 123-text and in column B I only want to put the text or the number only so it means that if I have in column A "123text" in column B I only want to put "text" word. Another information is that the number is not always 3 number and the text is not always 4 character.
I need to have a formula or code so that when a number is entered in cell E12 or F12 or L12, or M12 would treat a positive number as a negative and a negative number entered would be a positive in that respective cell.
Let's say that row a,b,and c contain a list price, discount %, and discount price respectively. I want to be able to change either the discount % and it will recalculate the discount price or change the discount price and it will recalculate the discount %. So to put it more clearly:
cells in row A: Contain the List (undiscounted) price. This will never change.
cells in row B: Will be a discount %. It is equal to: (list price - discounted price)/list price. needs to be recalculated if discounted price changes. Also, it should only contain data if the cell in Row A - list price - contains data.
All cells in row C: Will be a discount price. It is equal to: (1-discount %)*list price. needs to be recalculated if discount % changes. Also, it should only contain data if the cell in Row A - list price - contains data.
I am looking for a code that will be able to link cells H9:I14 on Sheet 1 with cells H7:I12 on Sheet 2 of the same workbook so that if I change H9 on Sheet 1, H7 on Sheet 2 will show the same figure and alternatively if I change H7 on Sheet 2, H9 on Sheet 1 will show the same figure. If this could work for all 12 of the cells and their equivalents respectively.
Furthermore, If a blank column or row is inserted, hence the cells move, the link will remain useable.
I have plenty of different columns throughout the workbook where this needs to be done so I imagine I can just adjust the code as necessary to incorporate different cells.
I've attached a sample/equivalent workbook of what I'm working on which will hopefully make it clear(er).
>There are two worksheets/month. Both worksheets (represent 2 different categories) are structured the same, two columns: model code & $ amount. >The model codes change (in # and actual model), between categories and month.
>The data for each month rolls up into a year-to-date summary worksheet, with 4 columns: Model (includes all models YTD, each only listed once), category1 YTD, category 2 YTD, & Total YTD).
Previously this had been done by manually entering any new models for the month into the rows in the YTD summary sheet. And the totals for each model (highlighted in yellow in the YTD tab in my sample) were just done by an adding formula, with the new month's data manually entered into each individual cell at the end of the formula (...+X). I know there's a much better way to do/automate this! (there are a lot more models than I've put in my sample aka it's way too time consuming manually).
My problem is twofold: 1. (main issue) I have been trying to do this using various IF statements nested in VLOOKUPS, and vice versa, but the issue that arises is for models in the summary sheet that don't exist in a given (month's) table. I want the value for those models (for that specific month) to be zero, but I cannot figure out how to get that to work in my formula. The only piece that works for me thus far is =VLOOKUP(A3, 'Jan Cat1'!A2:B18, 2, FALSE), but I've tried nesting it in IF statements, nesting IF statements in it, using ANDs & ORs, no avail.
I'm not even sure any of these options are the best ways to reach what I'm ultimately trying to do. A pivot table may be better? But I will need to keep/preserve the summary sheet for each month (so there cannot just be one big updated master pivot table).
2. If I could find a way to automate/refresh & update the row of models each month, it would be the sprinkles on the icing of this cupcake.
but this doesn't "stick", if I filter the numbers by negative numbers, none of them show up. So how do I make the formatting actually become the numbers? Auto Merged Post Until 24 Hrs Passes;After doing some more research I found the "precision as displayed" option. I can't find this option on Excel 2007, but I moved the files into 2003 and the option doesn't do anything. It is not permanently changing the column that I have added the formatting too.
Attached is the sample data worksheet. Chart 1 is XY type chart using Seconds (2nd column of sample sheet as x-axis from 42510 to 42530). How do I change it to Line chart using Time (1st column of sample sheet as the X-axis) retaining same data from 42510 to 42530 on both primary and secondary axis?. And how do I again change it back to XY chart?
Column 1 has 1200-1209,1300-1350,1523-1563 Column 2 has 1400-1409,1600-1650,1823-1863
I would like to take the range of e.g. 1200-1209 and have excel put 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 into separate adjacent cells for me. And be able to do this for each column/cell of data I have like this.
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C Wells 123 Wells 123 Wells 1234 Wells 1234 Wells Fargo 123 Wells Fargo 123 Wells Fargo 1234 Wells Fargo 1234 Wells Fargo Inc 123 Wells Fargo Inc 123 Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have column A which shows the quantity of a product that I have in stock
A1: 20 A2: 20 A3: 20
I also have column D which shows an increasing income, the amount of the increase varies daily but what I need to achieve is that every time cell D is greater than 50 then cell A4 should be the sum of A3 + the number of '50's that were in D3.
So in this example A4 would increase to 22 (because I can spend 100 on 2 items of stock) and cell E3 would show the balance. In this example its 7.35
I have a range of numbers that are not completely sequential and I'd like to separate them out into their individual numbers. In cell A1 I have displaying "1-30" and then in cell A2 I have "50-72" and A3 "100-105", et cetera. I 'd like to have cell B1 through B30 display 1 through 30 (1 in B1, 2 in B2, 3 in B3...) respectively, and then cell B31 through B53 would have 50 through 72.
I need to create a formula that can dynamically pick up the last number after the "-" so that it can work for any number range of any length. I've tried using left and right but that doesn't help when moving from the 10's digits to 100's digits.
I have a file contains thousands of rows of purchasing order. the purchasing value is in different local currency,the data(number) format is "Accounting" .
Is there a way to separate the currency sign and the number into different column?
I need to the currency sign to be able to convert data to desired currency. But Excel read the data as number. so I was doing it row by row. Such a pain and not efficient.
The 'Text to Column' function does not work because there is no fixed width and no deliminater. To add in a deliminater, like a "", is an option but there are thousands of cells to do this to.
As you can see, using LEFT, RIGHT and MID functions become tricky since the deliminater would be a "space" but there are often several "spaces" in the string of characters.
Is there a way to SEARCH or FIND the first number and let that be the deliminater?
I have text in column F that have numbers at the begining of the text. Unfortunately not all the number are of the same lenght. what is the way I can separate them from the text.
example:
87VADTREVINO GROUP79403HEITKAMP SWIFT7O554HEITKAMP SWIFT
I want to separate them into several cells. Each cell can only have 30 characters or less. You can not cut it in the middle of the data.
After your separate B1 should be "C102, C110, C114, C116, C118," (30 characters) C1 should be "C120, C125, C128, C130, C131," (30 Characters) D1 should be "C132, C134, C135, C139, C140,"(30 characters) E1 should be.......... till the end.
I try to several functions too. But it does not works.
Excel 2003: I need code that, when an "x" is entered in a cell in the "Activity" worksheet to assign a temporary unit #, it will look for the next available Temporary Unit # in the "Assign" worksheet. Then mark that unit # as "assigned" (by placing an "X" in the column next to it) and copy it to a cell in the "Activity" sheet.
I will be doing the same thing with assigning different types of PO numbers. I figure if I have the code for the Unit #, I can use the same logic for the other assignments, with some modifications, of course.
I've attached a sample workbook.
If I am not considering the most effective way to accomplish what I am trying to do here, I have no ego at all about someone suggesting a better solution.
I am trying to put all my parts with quantities on a seperate sheet called "Parts List" Every time you select a quanity for one of the parts, I want it to pop up on my parts list. This will make it easier to identify the exact parts I want and also the quantity I need. This will be much more convenient then scrolling down my parts list and trying to find the one's with quantities.
I think I need to use a vlookup or even a Macro but I don't know how to go about doing this.
I need a VBA function to extract number sequences from a string and separate them with hyphens In the example below cell A1 has the value 'xx2 yyy34 zz515' The code must produce the value '2-34-515' from the above example I have the following function that extracts the numbers but need a way to separate the groups with a hyphen
Code: Function parseNum(strSearch As String) As String Dim i As Integer, tempVal As String For i = 1 To Len(strSearch)