Use Vlookup To Output Product Number And Quantities On Separate Sheet
Jun 27, 2013
I am trying to put all my parts with quantities on a seperate sheet called "Parts List" Every time you select a quanity for one of the parts, I want it to pop up on my parts list. This will make it easier to identify the exact parts I want and also the quantity I need. This will be much more convenient then scrolling down my parts list and trying to find the one's with quantities.
I think I need to use a vlookup or even a Macro but I don't know how to go about doing this.
View 1 Replies
ADVERTISEMENT
Dec 27, 2013
I have built a pivot table that shows parts used during a period of years. I need creating a formula that would sum each part by a particular year.
The table is as follows
A part number
B date
C total quantity
I want to display the totals on a separate sheet.
View 7 Replies
View Related
Dec 24, 2008
I'm working on a order spreadsheet system, and I have one sheet called Product Details, where the product name, list price and product code are found, these link to the Sales order page, and I need them so that they can be added to.
So far, I have created a dynamic named range for the Product name on the Product details sheet, and linked the the range via a list validation on the Sales order sheet.
The drop down list displays the products and can be added to by typing new product names on the other sheet.
What I need now is that when a product on the sales order page is selected, it draws the the list price and product code data automatically from the sheet, I tried using a normal vlookup, but I couldn't get it to work. I also need the list price and product code columns to be 'dynamic' so new values can be added further along.
View 5 Replies
View Related
Feb 20, 2009
i need to look up a product based on the number and the qty. see the example attached.
On tab "Printer - S" 1 need to lokup the costs based on the product code 8 and the qty 100. How do i do this and make it adjustable for any range of priduct codes and qtys. Again, becuase this will be used on a Mac Office, i cannot use macros.
View 4 Replies
View Related
Mar 13, 2006
I have a sheet set up with names. I have 2 other sheets with spouses and
children that belong to the first sheet. I want to insert a formula that
will look up the correct spouse (based on a member number) and put in it the
column. Same with the children. I tried the vlookup function, but it did
not return the correct result.
View 14 Replies
View Related
Jul 16, 2006
In the first sheet I have two columns, one for the product_id and one for the name of the product. So the Sheet1 is like a small database. The second sheet is for the orders.What I want is when I type the product id in the A column of the orders sheet(Sheet2) to auto insert the product name in the B column so i dont have to write it every time.
View 2 Replies
View Related
Jul 4, 2007
What I want is one sheet that has all of the fomulas, then 4 other sheets that take those formulas and calculate the output based on the formulas and one column of input.
So essentially, I want to be able to change the formula once, and have it applied to all of the other sheets, resulting in a new output for each one.
View 4 Replies
View Related
Mar 17, 2009
I have a table with client ID in column A (range A2:A200) and qty ordered by those clients listed in column B (range B2:B200). Clients’ ID numbers range from 101 to 999.
Except through filtering, how to return the sum of quantities ordered for stores with ID number between 100 and 199 ONLY?
View 9 Replies
View Related
Oct 16, 2012
I am trying to have a Vlookup Macro to add all the prices for a certain product in different tabs.
VB:
Private Sub CommandButton1_Click() 'Generate Info Button
Dim ws As Worksheet
Dim ISSUEPRICE As Integer
Dim RESULT As Integer
Dim sheet As Worksheet
For Each ws In ThisWorkbook.Worksheets
[Code] ......
View 3 Replies
View Related
Sep 11, 2009
I am using the following formula to calulate the compounded rate of return for a series of monthly returns: {=(PRODUCT(1+(b1:b100)/100)-1)*100}
I would like to be able to integrate a VLOOKUP function into the above formula so that it looks at the dates in column A and then apply the PRODUCT function above to the return values in column B that fall between start and end dates specified in cells C1 and D1.
View 4 Replies
View Related
Jun 15, 2009
I'm trying to get a cell {in the attached spreadsheet 'Order Form' Sheet- Cell 'B13'}, to bring up the corresponding product description {'Products' Sheet- Column C}. For the cell that is to bring up the product description {'Order Form' Sheet- Cell 'C13'}, the following is the formula I'm trying to use, but is coming up "#N/A":
=IF(C13>1000,VLOOKUP(A13,Products!$A$2:$D$12,3),IF(C13>287,VLOOKUP(A13,Products!$A$14:$D$25,3),IF(C1 3>0,VLOOKUP(A13,Products!$A$28:$D$38,3)," "))).
I haven't attempted the "Cost/Bottle" formula yet {'Order Form' Sheet- Cell 'D13'}, but it needs to correspond the product number {'Order Form' Sheet- Cell 'A13'} and the quantity ordered {'Order Form' Sheet- Cell 'C13'}, with the cost/bottle on the that quantity found on 'Products' Sheet, Column D.
View 5 Replies
View Related
Jun 2, 2006
I have a very large spreadsheet where i have orders, product and line status listed. I neeed to find the line staus of each product in production against the order. I'm using an array sumif formula but since the spreadsheet reachs 10000 rows of information I dosn't alway calculate correctly.
ORDERPRODUCTSTATUS
ABCDAPPLEPICKED
ABCDORANGEON HOLD
ABCDPEACHSHORT
ABCDYAMSSTAGED
EFGHAPPLEPICKED
EFGHORANGEON HOLD
EFGHPEACHSHORT
EFGHYAMSSTAGED
Required Result
Order
ABCDAPPLEORANGEPEACHYAMS
PICKEDON HOLDSHORTSTAGED
View 5 Replies
View Related
May 3, 2007
I know how to do Vlookup and get the value on the +1 column as following
=VLOOKUP(50, D5:E19, 1)
What about I would like it return the value of -1 Column. Can I using some function of Offset with other functions?
View 4 Replies
View Related
Sep 30, 2009
I am trying to use a PRODUCT formula to return the product of a list of numbers in a column, between 2 specified dates. The spreadsheet is arranged as follows:
Column BA list of dates
Column C & DNumerical data not used in any calculations
Column EThe numbers to multiply together
Cell A1Start date to be used in the PRODUCTformula
Cell A2End date to be used in the PRODUCT formula
The formula I have to multiply the data in column E, subject to the start and end dates in Column A is:
{=PRODUCT(IF(B15:B1000>A1,IF(B15:B1000<=A2,INDEX(B15:E1000,0,4))))}
This returns zero though works appropriately if I replace “PRODUCT” with a “SUM”.
View 2 Replies
View Related
Aug 3, 2009
I need a formula that will bring up the Model type of a product based on its Material code. All the models I need to generate have a "root" number in them (the first 6 digits define model type). This is what I need to fill out:
View 2 Replies
View Related
Dec 24, 2013
I have a column with lots of tube station names. I have a look up table with the tube station name, and the possible lines that pass by that tube station.
One tube station may be covered by more than one tube line.
I am looking for a formula that will output every tube line that caters that one tube station.
first question, what is the best way to organise the data in my look up table.
Second, is a vlookup the best formula to achieve the output I want? i.e. Reflect how many tube lines cover each station
see table below: If the station name has only one tube line, Vlookup works fine. When the station, such as Canno Street, has two tube lines, Vlookup only picks up one tube line. If I duplicate Cannot street under the station name, the Vlookup picks only one tube line.
LOOK UP TABLE A1 - station name
B1 Tube line name
Cannon Street
District
[Code].....
Is there a formula that will output the data of the second tube line name in column D1?
View 3 Replies
View Related
Jan 30, 2014
I would like to have a Macro to go from the first tab called "Start" and end up with the second tab "End" automatically. BAsically I need to take the product on each line under Tab Start and reproduce it for sizes 35-41 always ending with "-(size)". Then this new Product with Size needs to be multiplied one below the other for as many times as I have pictures (number shown under column B of the tab Start). Next to this value in column B of tab End I'd like the same name listed again but with the number 1, then 2, then 3, etc. as needed and the extension .jpg.
View 4 Replies
View Related
Dec 9, 2011
I am trying to do a vlookup to 1 sheet based on customer number and return price. If no customer number than I want to do a vlookup based on dunnage number to return the price. This is what I have for a formula but it never returns a value if one is found in the first lookup.
=IFERROR(VLOOKUP(C4,'Dunnage Exception'!A:C,3,FALSE),IFERROR(VLOOKUP('Raw Data'!D4,'Dunnage Master'!A:C,3,FALSE),"0"))
View 2 Replies
View Related
Apr 30, 2014
I am trying to develop an invoicing system for my company. Most of our customers will have their invoices formatted a certain way which has been relatively easy to solve, however one customer needs to have their invoices formatted in a special way.I have a sheet that pulls in a list formatted like this:
Date product order number kilos
07/4/14 48% cream 445600 1000
07/4/14 PHM 445600 1500
07/4/14 PHM 445600 1000
07/4/14 PHM 445600 2000
10/4/14 48% cream 445800 500
What I need it to display is the following:
Date Product order number kilos
07/4/14 48% cream 445600 1000
10/4/14 48% cream 445800 500
07/4/14 PHM 445600 4500
So you can see it is grouping the invoice by both product type and order number but grouping by product.
View 3 Replies
View Related
Jan 15, 2010
I am looking for an efficient solution to the following problem. I have a sales table with two columns, titled C1 and C2. The first column lists the product sold, and the second column lists the associated customer.
Here's what I mean (though I can't figure out how to create neat columns in this post):
[C1] [C2]
Prod1 CharlieCo
Prod3 AlphaCorp
Prod2 BetaInc
Prod3 BetaInc
Prod1 AlphaCopr......................
View 5 Replies
View Related
Feb 17, 2014
I have another problem with my previous file that I need to finish. Because I want to make it clear I'll attach the files and pictures before the middle, and what can be the end of this table.
View 9 Replies
View Related
Oct 21, 2012
What I need is a script or formula with returns multiple results and puts them into one cell.
The Excel is used as a Project Managment Work Sheet for Resources, working on different Projects and their dedicated hours
The raw data table looks like this:
Column A: Project Name (=AllProjectsLists)
Column E: Resource Name (=MasterDataResources)
Column P: values from 0 to 8 (hours)
First I need to check per row the Resource Name. If the Resource Name is a match, than I need to check if in column P the value is bigger than 0. The result goes into a different sheet per row, one result per Resource, but the multiple results should be shown in one cell.
So the result should be something like:
Resource name "Thomas" .... Projects working on: "Project 1, Project 5, Project 13, ..." (in one cell)
Resource name "Mary" .... Projects working on: "Project 3, Project 9, Project 13, ..." (in one cell)
I tried with this one, but it only returns one vale per cell:
=SMALL(IF(E$9=MasterDataResources; ROW(MasterDataResources)-ROW($A$2)+1), ROW(1:1))
=INDEX(AllProjectsLists; SMALL(IF(E$9=MasterDataResources; ROW(MasterDataResources)-ROW($A$2)+1); ROW(1:1)))
View 5 Replies
View Related
May 8, 2007
I am curious if there is a way to combine the content of rows based on a change in account number(column A). The tricky part of it is that an account number could be in the file once and another could be in the data twelve times. The list is sorted by account number. I want to take the product code and description and keep placing in the combined row for each account number. Attached is a sample of the data.
View 6 Replies
View Related
May 11, 2009
I have an excel sheet with several thousands products.
I also have an excel sheet with hundreds of products that need to be deleted.
The excel sheet with the products to be deleted have a unique product model number to identify with.
I've been using the "Find" feature to query 1 product at a time. It works but it's slow. Is there quicker way to do this?
For example can I feed a list of Product Models to excel and tell it to delete the items?
View 9 Replies
View Related
Jul 31, 2009
I have a bit of code in sheet two of my document that requires user input to produce output. However I have the document set up in a vway that requires the actual input to be placed in a vell in sheet one, and the cell in sheet two is just "=cell in sheet one". This causes the input cell in sheet two to change but the output cell does not produce the new answer.
View 4 Replies
View Related
Aug 17, 2013
I have an unusual situation which is best explained by way of an attached example.
In summary adding and subtracting four cells containing integer values outputs an unexpected non-integer value, which should in fact be zero.
The situation is best explained by way of example which I attach to this post : Excel Problem.xlsx
Basically, Cell E1 should be zero.
View 4 Replies
View Related
May 4, 2006
I can retrieve the weeknum of any particular date using =WEEKNUM(x) or =TRUNC(((x-DATE(YEAR(x),1,0))+6)/7)
But I'm looking for a UDF to output the tax year week number where the tax year always starts on 6th April. The std weeknum for 6th of april pretty much varies around week 13 but as it varies I don't ever get a strictly true result by deducting 13 from WEEKNUM().
View 4 Replies
View Related
Jan 8, 2008
I have several columns of info on my worksheet. I want to output a list of all possible permutations from this worksheet (not the number of permutations but the actual permutations themselves).
View 9 Replies
View Related
Nov 17, 2008
I have 2 separate workbooks and I would like the Vlookup function to look for the value in "DO" after matching the both "Job Sheet". I have attached 2 files for better understanding.
View 4 Replies
View Related
Apr 10, 2014
I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
View 3 Replies
View Related
