In a column I have loads of numbers like this except there are 5000 of them.
3
2
0
0
0
0
2
0
3
0
0
2
0
9
how could i sort it into another column so it stays in the same order but counts the 0 values so it would look something like this.
3
2
0 (x4)
2
0 (x1)
3
0 (x2)
2
0 (x1)
9
I have about 3000 of these values per column. I need to sort the data so that column B and E are the same values. But the cells to the left and right of each B and E need to sort with it. Plus where there is a missing consecutive value I need a blank cell added...
View 8 Replies View RelatedI have a spreadsheet that track orders. I want to be able to add a bit code to my current VBA script that sorts the data based on the values in a particular column (smallest to largest).
Current table looks like this:
Order Number
Date
Quantity
Colour
Priority
548562
12-09-2012
56
VBA formula
2
[code]....
I want to add be able to sort the data, smallest to largest based on Column E (tittle Priority)
I have a small challenge with the following parameter
2 columns of data, the first A contains sets of calendar dates:
A1 27-4-2013
A2 27-4-2013
A3 27-4-2013
A4 28-4-2013
A5 28-4-2013
Op to 5000 lines but normally around 140 of them for each date in April 2013
Colum B contains wind speed data from a met tower
B1 15.0
B2 5.3
B3 7.9
B4 3.2
B5 32.4
What I need to find are the Highest, Lowest and Average wind speed for a specific date.
I have a NOW -1 function in field C1 I would like to use as the parameter to search for in column A so I get the last full calendar days full data set (10min values), so writing it up it sounds something like this: Look in column A line 1:5000 and if you find any date the same as in C1 then move the content of B to a new separate column D line 1:140 and when all 140 lines are extracted for the specific date then find the Highest, Lowest and Average wind speed between those extracted data.
I need a way to find a value in a column which has one or more corresponding values in an adjacent column. Then take all of the corresponding values found and count all occurrences of the found values in another column. But I only want to count the entries if an adjacent column is not blank.
Not the easiest thing to describe. Starting to wonder if I need to think in reverse. I hope the attached example makes more sense.
Book1.xlsx
I have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?
View 2 Replies View RelatedI havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings()
Dim iCTR As Integer
Dim yCTR As Integer
Dim zCTR As Integer
zCTR = 11
For iCTR = 12 To 23
For yCTR = 1 To 10
If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then
Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value
zCTR = zCTR + 1
End If
Next yCTR
Next iCTR
Range("AA11:AA" & zCTR).Select
Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
End Sub
I have some data like the following:
2 3 4 8 4 1 3 3 1 8 1 3 5 8 1 2 5 6 1 7 9 3 3
I would like to be able to count the number of times 1 follows 8 for example. For the data above the answer is 2.
I have an Excel macro which works well in comparing two columns A and B. It populates column C with unique values in A and not in B, populates column D with unique values in column B and not in A and puts the values found in both A and B in the fifth column (E).
Data in the columns A and B of Sheet 1 has exceeded 1,048,576 (the maximum allowable in Excel 2007) and i will copy the overflow data in Sheet 2's column A and B and i will like the comparison to continue in the next worksheet.
I need the macro to treat the second worksheet as a continuation of the first sheet and not as a separate data. (The values i am comparing have exceeded 1million).
Sub twocols()
Dim d As Object, na&, nb&, a, b
Dim e, p&, q&, r&, m
Set d = CreateObject("scripting.dictionary")
[Code] .......
I need to count the # of unique employee #s based on the criteria in column B. If the value in column B=0 then I do not want to count the employee #.
I realize a pivot table would be much easier but I need to show each line which includes other data.
=SUBTOTAL(2,A2:A100) can be used in combination with any other formula so that when the data is filtered using autofilter it will only count values greater than zero.
I have attached a worksheet with the example.
In the attached workbook subtotal formulas are used in Row1 for sum and row 2 for count.
When the data is filtered using code "DUP" in column D, the subtotal in cell C2 is "4", whereas in the specified range there is a positive value in only 1 cell that is $1050 in cell C99.
Is there some combination that can be used with SUBTOTAL formula so that it will only count values greater than zero when data is filtered.
I have this massive spreadsheet, with the maximum rows excel will fit on one sheet. In the interest of simplicity, this is what the raw data looks like:
Last First Amount
Jones Jim $1000
Jung Joe $700
White Jon $100
Jones Jim $200
Jones Jan $300
Jung Joe $800
White Jon $200
What I want to do is automatically get excel to group all the same names together. Then I want it to sum all the values for each name, then order by largest total value for each person, then order that by name alphabetically. In other words, the above would look like this after the sort:
Last First Amount
Jung Joe $800
Jung Joe $700
Jones Jim $1000
Jones Jim $200
Jones Jan $300
White Jon $200
White Jon $100
Or, if necessary, there could be sum total rows under each name...although I don't have spare rows, so IDK. I could delete some rows if I had to, but would rather not.
I am able to quite easily count the number of specific values in a cell after the table has been filtered. However, the problem I have run into is that some times the data needs to be placed into the spreadsheet twice (or to be more specific the same subject is associated with several unique data points).
What I need: some way to count the instance of some give value in column D only once based on the presence of a duplicate (unique) identifier in column C. However, when I filter the entire database, it must count *only* the filtered cells and not the hidden cells as well.
Picture:
Column C Column D
111111 M
111111 M
111111 M
[Code]....
Currently calculates: M=9, F=2
Right now it incorrectly states there are 9 "M" from column D when it really should be 5 since 3 are duplicate values. My main difficulty is making sure this continues to work after I filter the entire sheet (say column ZZ) and have a bunch of hidden cells.
Equation currently using to count only filtered values (in this case "males" and "females"):
="M = " & SUMPRODUCT(SUBTOTAL(3,OFFSET(D3:D13,ROW(D3:D13)-MIN(ROW(D3:D13)),,1))*(D3:D13="M"))
The Data that I have is Grades:
Gade 1/Class A
Grade 2/Class B
Grade 3
Etc..
I wanted to use if function, but I couldn't as there's a limit on the characters that can be used in "IF Function", but unfortunately, I can't because I exceeded the limit, as I have too many grades to include in "Logical_Test",
What I am looking for if one of this data was found write 45 Days, if other grades that is not listed was found write 30 Days.
I have 5 columns of numbers and at the bottom of each column I want to list every number in order from least to greatest and how many times it occurred in the column.
I'll just provide you with 5 rows of numbers so I don't waste a ton of space.
0628313841
0814364045
0203193042
0105101518
2021233335
I have data in table which look like this
A
B
1
NAME
AV
2
SONA
18
[Code] .........
I Want a formula that will enable excel to give me the number of students with Av.
>= 18
>= 15 but not > than 18
>= 10 but not > 15
I have some code which copies down a formula in a range of data. After this I want it to sort the data by this column in question. However my data range will differ in rows all the time and if I record the sort through the macro method it saves the VB code as a fixed range i.e:
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range("A2:A1967" _
), SortOn:=xlSortOnValues, Order:=xlDescending, DataOption:=xlSortNormal
The formula code beforehand does acquire the last row number if that's of any help:
Dim rng As Range
Set rng = Range(Cells(ActiveCell.Row, 1), [A50000].End(xlUp)).Offset(0, 1)
rng.FormulaR1C1 = "=IF(RIGHT(RC[-1],2)=""XP"",""5"","""")"
I would like to have the duplicate numbers in position one ( cell D9:D18), position two (cell E9:E18) and position three (cell F9:18) all counted and then ranked based upon date range in column A.
The number order of precendence is 0-9 with zero being the lowest.
Column (I9:I18) counts the duplicates, draws and no draws of digits 0-9. Column (J9:J18) converts results from column I9:18 into a percent.
I need to add a sort button at the bottom of position 1 (columns H & I 22), position 2 (columns L & M 22) and position 3 (columns P & Q 22)
When the sort button is selected it will sort the data by # of repeats, draws, and no draws as illustrated in (columns I, M & Q) or sort data by Position number from 0-9 as illustrated in (columns H) which will then show data of repeats and percentages out of rank order, because it is in order of number precedence.
Last but not least a graphic bar chart that shows the results ranked highest to lowest from when the sort button is selected with the number at the top of the bar colored black. Bar graph colors to be: top 3 red, middle 4 yellow and bottom 3 blue. This should show a vertical cascade effect.
Ive written the macro below to sort Column A according to the length of the cell values in Ascending order. Ive done this by writing the length to Column B for each value and then sorting on column B. Surely there is a more elegant method, perhaps using arrays.
Sub SortIt()
Range("A1").Select
Do Until IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Value = Len(ActiveCell)
ActiveCell.Offset(1, 0).Select
Loop
Columns("A:B").Sort Key1:=Range("B1"), Order1:=xlAscending
End Sub
I have provided an attachment. what I am trying to accomplish. I am trying to have a worksheet that if I input multiple 3 number combinations into the input cell range, after pressing the sort button, it would then sort, rank and count each 3 number combination for me. So as my attached file illustrates, the input cells would be A9:D14. In this sample the ranking consists of cells A19 - A31 as the ranking columns. Cells F19 - F31 show the counted and sorted results and are ranked accordingly. I need a sort button as illustrated in cell F10 to make the worksheet function after the 3number combinations are inputted in cells A9:D14. How do I get started to make this work? I do not know VBA codes or macros so I will need guidance along the way if this is what is needed. I do have some working knowledge of formulas (e.g. countif, rank, etc.)
View 8 Replies View RelatedI require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
I have 9 columns of data in C2-C10 that I can sort numerically by the values in C2. All the numeric values in C2 are also in C1 but C1 has additional numbers not in C2.
I want to sort C2-C10 such that each row in C2-C10 aligns with its respective value in C1.
e.g. If C1 contains 1,2,5,8,34,42,56 and C2 contains only 2,5,34,56 I want the row (of C2-C10) with C2=2 to align with the cell where C1=2. And where C2=34 I want the row (C2-C10) with C2=34 to align with the cell where C1=34.
Is this possible though i'm not sure my explanation of what I want to do is good enough!
Note that my dataset is going to be very large (500,000 rows).
I'm trying to sort values in order by how close they are to a target, whether they are above or below the target.
Example:
Target = 24
17
22
25
16
30
Result:
25
22
30
17
16
I would like to know how to sort a group of values/scores (values from row 1 belong together etc) ....
View 9 Replies View RelatedIs there an easier way to sort a column full of numbers by their absolute value without having to create an additional column, use formulas to get the absolute, then sort that column and then delete it.
View 5 Replies View RelatedI have this table which I fill out each week. How I would get these values to automatically populate my other table which is displayed in months? (this table is wider than shown with more columns for other equipment and goes down for whole year).
#
Week Commencing
Available Machine Mins
Total Mins
OVERALL DOWNTIME
Can 61
Available Machine Minutes
Can Downtime to Process
1
30/12/2013
10090
199
1.97 %
24
2800
0.86 %
[Code] ..........
Need code of function that can sort the values in a cell?
For example:
Cell A1 contains 67,87,1,45,109 (note the commas), is there a quick way to change this to 1 45 67 87 10?
This is only a snapshot of the data I'm working with, I have 400 cells each containing between 10 - 50 numbers.
What I'm doing so far is, for each cell:
Text to Columns
Side Ways Sort A-Z
Copy all values to notepad
Copy all values from notepad directly back into the cell
Is there a way in Excel to have a list of names with values automatically re-sort whenever any of the values change.
The default sort I have in mind is ascending by values.
eg.
CITY VALUE
Sydney 100
Boston 200
London 300
Moscow 400
Houston 500
The values change to:
Sydney 5000
Boston 250
London 8000
Moscow 300
Houston 50
I now want Houston 1st, Boston 2nd etc - automatically - without me having to do a sort again by Value.