Splitting String To Cells

Nov 14, 2008

I have question I need a macro which splits strings to multiple cells.
Here is how my data looks like.

Here how I want it:

PS: I prefer macro instead of formula. T

View 9 Replies


ADVERTISEMENT

Splitting Separated String Data In Cells To New Cells

Jun 6, 2006

I have pricelists tables with 300 and more rows and about 50 columns. Three letter codes in first column cells are in strings separated by separator (,), I need to split this strings so that each three letter code would be in its own cell in first column, at same time all other cells in same row as original string data should be copied to rows near appropriate 3 letter codes. In attached xls file I have made small example how data looks before and how it should look after applying macro. Table should not move to other place on worksheet or on new worksheet, in attached example I moved it just to show what kind of form result should have.

View 2 Replies View Related

String Splitting

Jan 23, 2007

If I have a string which contains 3 words, is there an easy way of separating out the consonants into one string and the vowels into another (spaces should be ignored)?

The only way I can think of doing it is to go through the string item by item and comparing the letters to a list of vowels and using that to do the separation.

View 9 Replies View Related

Splitting Character String

Jul 28, 2008

How do I split the below character or similar strings into 2 columns of 25 characters each without cutting a word off?

BONE CURETTE-RVERSE ANGLE 5.5MM WIDTH-MEDIUM/BAYONETED

View 14 Replies View Related

Splitting A String With Split

Apr 3, 2009

I'm stumbling upon something I just can't figure out. I thought I was being very clever using the Split() function, and it did all work beautifully for a while.
I've got a list sort of like this:

Helloworld
Hello of World
Hello1 of Planet
And I want to be able to run the following code.

For Each u In units
d_type_a = Split(u.Value, " of")
Debug.Print (d_type_a(0))

Select Case u.Value
Case "Hello"
stuff...
Case "Helloworld"
stuff...
Case "Hello1"
stuff...
End select
next

But it fails on the Debug.print with a "Subscript out of range, nr 9" error. The debug is just there because it doesn't want to work. The debug.print DOES out put "Helloworld" into the Immediate window but then still fails which sorta confuses me.
The best I can figure out is that it just doesn't quite like the string without an " of" in it.

View 9 Replies View Related

Splitting A Cell String Depending On Variables

Mar 1, 2009

On to what brought me here; I have a spreadsheet with a column containing an address, eg '12 SMITH ST SOMESUBURB NSW 2001'. I'm looking at splitting this cell in half after the street and moving the second half (suburb state postcode) into the next cell, which i've managed to do with a series on InStr statements.

Now the fun part is that not all these addresses are streets, some are avenues (AV or AVE), roads (RD), place (PL), drive (DR or DRV) etc. Initially i just did this:

View 7 Replies View Related

Splitting Text String (address) Into Separate Columns

Jun 2, 2014

I have address that sits in one cell only and I need to separate into two or three columns (streetname, street number, streetletter).

Is this possible as the length of street text, numbers and letter differs all the time...

Attached is a sample file with before and after result

address.xls‎

View 5 Replies View Related

Splitting Data In Cells

Jul 28, 2014

How to split the data in my cells

Currently it looks like this.
1 - 2 - 3,4,5
A - B - C

I would like it to look like this.
1 - 2 - 3
1 - 2 - 4
1 - 2 - 5
A - B - C

View 6 Replies View Related

Splitting Cell Into Two Cells

May 28, 2009

I know how to use concatenate but is there anything that will do the opposite. I want to take one cell that has both a date and time in it, and make the date in one cell and the time in another.

View 3 Replies View Related

Splitting Data Into 2 Cells?

Oct 14, 2011

spliting a cell and moving them to 2 other cells.

Column D contains date and time in the format: 15/09/2011 08:01:01

I need them to be split into Date in column V and Time column W

Need the code to loop until there are no more values in column D.

Forgot to mention that the Column D is a date format and they need to be in there respective date and time format when split!

View 5 Replies View Related

Splitting Text In Cells?

Feb 9, 2012

I'm trying to break up text in excel based on certain criteria and would prefer using a formula.

Criteria one: Must be 35 characters or less in length
Criteria two: Must include full words

So for example:

Cell A1: Sally bought a new purse

End Result:
Cell A1: Sally bought a new purse
Cell B1: Sally bought a (assume 35 characters)
Cell C1: new purse (assume 35 characters)

As mentioned earlier the only caveot is that it cannot break individual words IE: "Sally bought a ne"

View 9 Replies View Related

Splitting Text Across Cells

Jan 8, 2009

I'm having trouble splitting some data.

I have account codes like 1201.170170 that I must split into two cells containing 1201 and 170170

When I use "left" and "right" functions, it cuts off the zero on the far right. Assuming base data in cell F2...

=Right(f2,6) returns .17017 rather than the intended 170170

I've tried formatting the cells as text, but that doesn't seem to work either.

View 9 Replies View Related

Splitting Cells By Non-printable Characters

Oct 12, 2009

I've had a quick look at past posts and there is plenty on splitting cells but I haven't been able to find anything to help me with the following:

I've pulled address details from a database which have populated into a single field with each line separated by 2 'square' characters. I need to split each line into a separate cell for a mail merge. I've seen these characters before and always assumed they represent a space or 'return' and I believe is an ASCII character?

If I select a cursor in the cell the lines drop as they should with 1 square character left at the end of each line and it stays this way when I leave the cell.

I've tried CLEAN & TRIM functions; the first removes the characters, the second doesn't recognise the character at all. The most promising seems the 'Text to Columns' function, setting it as a delimited string, but I don't seem to be able to enter this particular character as the delimiter under the 'other' option.

View 8 Replies View Related

Splitting Alphanumeric Contents In Cells

Jan 18, 2013

Cell A3: Abbott, Robert M.,MD
Cell A4: Bussiere, Laura P., ARNP
Cell A5: Bradford, Melinda ARNP

I have this data in Column A and I'd like each person's last name to appear in Column A and the first name to appear in Column B and the credentials to appear in Column C like this:

A3 B3 C3
Abbott Robert MD
A4 B4 C4
Bussiere Laura P. ARNP
A5 B5 C5
Bradford Melinda ARNP

Also I'd like to be able to do the same with addresses:

In Row Q I have:

Q35: Jacksonville, FL 33204
Q37: St Augustine, FL 32092-1850

I would like this to appear in the sheet as follows:

Q35 R35
Jacksonville 33204
Q37 R37
St Augustine 32092-1850

I don't need the state in any cell. It can disappear as well as any commas. Is any of this possible?

View 1 Replies View Related

Splitting Workbook With Cells As Filenames?

Jan 21, 2014

I am attempting to split my workbook and save the sheets as individual files. Simple enough? yes. The issue I am running into is that when the sheets export I want their filename to be pulled from the value of a cell on a master control sheet. While I am pretty sure these can be done separately, not sure how to really do them as a whole within a one click button. Also an issue I am running into is that when I click my export button on my control page, the sheets that are saved have lost some of the page formatting.

SHEET1 is my control sheet

Here is the code that I was using to export the sheets.

[Code] ......

View 9 Replies View Related

Splitting Date Values Into Various Cells?

Jan 28, 2014

VBA code to split the the date values into various cells. For example 8-Feb-14 in cell A2 will be splitted into three cells (C2, D2 and E2) to have the values:

Cell C2: 8
Cell D2: Feb
Cell E2: 2014 (Note that 20 has been added to the 14 to make it 2014)

I have attached a spreadsheet to understand what I mean. The results are in red and the raw data is in black.

test12.xlsx‎

View 9 Replies View Related

Splitting Data From A Cell Into Different Cells

Jan 22, 2009

I have a column that has data with multiple values seperated by commas. I need to seperate out the values and add them to a new column.

Example:

Column A
good, cheap, fast
slow
good
cheap
cheap,good

I would like them to be added to column B as:
good
cheap
fast
slow
good
cheap
cheap
good

View 7 Replies View Related

Splitting Cells With A Formula And Not Use Text To Columns

Aug 13, 2014

I want to split a cell with a formula and not use text to columns. I will have a cell a1 for example with 1d 4h 36m 34s in and want to have 4 formulas 1 in
a5
a6
a7
a8

.. so the result will be
1
4
36
34

I know you can split with left, mid and right but don't know how to do it with the desired results.

View 7 Replies View Related

Method Of Splitting Cells Without Affecting Layout?

Jan 19, 2014

Was just wondering if it was possible to 'split' these cells (highlighted in the link below) into 2 columns without affecting the layout of the invoice.

[URL]

View 12 Replies View Related

Splitting Multiline Cells Into Separate Rows

Feb 13, 2014

I basically have a five column spreadsheet containing address information. While most cells only contain one piece of information, I have quite a few cells that have multiple lines of data in them because the individual has more than one address.

Here is an example. Note that Rows 1-2 contain single address info for each individual person. However, row 3 contains an individual with 3 pieces of address information in the four right hand columns:

Row 1: Unique ID | Name | Street Address | City | State | Zip Code
Row 2: Unique ID | Name | Street Address | City | State | Zip Code
Row 3: Unique ID | Name | Street Address | City | State | Zip Code

[carriage return in street address, city, state and zip cells]

--------------------------------- |Street Address | City | State | Zip Code

[carriage return in street address, city, state and zip cells]

--------------------------------- |Street Address | City | State | Zip Code

Row 4: Unique ID | Name | Street Address | City | State | Zip Code
Row 5: Unique ID | Name | Street Address | City | State | Zip Code

Please note that some individuals have 2-4 different addresses.

I would like to manipulate the 5 rows of example data above so that when I am done I have the following:

1. 7 rows of data (5 individuals with 7 total addresses)
2. Automatically copy and paste the unique id number and name into the two new rows that were created so that I have the following:

Row 1: Unique ID - 001 | Joe Chang | Street Address | City | State | Zip Code
Row 2: Unique ID - 002 | Joey Chung | Street Address | City | State | Zip Code
Row 3: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 4: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 5: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 6: Unique ID - 004 | Jane Derry | Street Address | City | State | Zip Code
Row 7: Unique ID - 005 | Julie March | Street Address | City | State | Zip Code

View 9 Replies View Related

Function To Insert - In Cells Splitting Data

Jun 17, 2006

My cell contents looks like this.

H1111111111111

I want it to look like this..

H11-111-111111-11

I know this can be done by formula but i dont know it. This info is in col B.

View 2 Replies View Related

Splitting Wrapped Cell Into Separated Cells

Feb 19, 2007

I tried too much to split one cell Containing more than one lineI need to put every line in different cell.

My small example can describe better ..

View 8 Replies View Related

Copying Data From Merged Cell Into All Resulting Cells After Splitting

Dec 2, 2009

I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.

I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.

My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.

View 2 Replies View Related

Splitting Continuous Text Into Two Cells Using Uppercase Letter As Delimiter

Nov 12, 2009

I have names that look like this:

SmithJohn and i want to seperate into two cells so it looks like

Cell 1: Smith
Cell 2: John

View 9 Replies View Related

Count Number Of Blank Cells In Range Starting And Ending Will Cells That Match String Values

May 13, 2013

I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.

I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?

The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.

View 5 Replies View Related

How To Replace String In The Cells

May 20, 2014

In one of my worsheets in the excel document, I have data as shown below:

Name Description Minimum Values Maximum Values
ABC test desc {0.0, 0.0, 0.0} {1.0, 1.0, 1.0}
DEF test desc {{0.0, 0.0, 0.0},{0.0,0.0,0.0}} {{1.0, 1.0, 1.0}, {1.0, 1.0, 1.0}}

Basically for a 1D array, the minimum and maximum values are within one set of brackets, whereas for 2D array (as shown in the second row), there would be nested brackets with comma after every closing bracket being a row separator.

My requirement is to write a macro to replace the minimum and maximum values in every row of the worksheet (I do not know the exact number of rows as it could vary) with just one value instead of repeated values depending on the size of the array. In other words, I am looking at the below output:

Name Description Minimum Values Maximum Values
ABC test desc 0.0 1.0
DEF test desc 0.0 1.0

View 2 Replies View Related

Find Cells Which Do Not Contain A Particular String

Dec 31, 2011

I would like to modify the macro below in order to find cells that do not contain */*/20*

How do I achieve this?

Code:
Sub delete_oldads()
Dim cel As Range, cfind As Range
ActiveSheet.UsedRange.Select
For Each cel In ActiveSheet.UsedRange
If cel = "" Then GoTo nextcel
Set cfind = cel.Find(what:="*/*/20*", lookat:=xlPart)
If Not cfind Is Nothing Then
cfind.Copy Cells(cfind.Row, "A")
cfind.Clear
End If
nextcel:
Next cel
End Sub

View 9 Replies View Related

Compare Two String In Two Cells

Apr 18, 2013

Some data

In Cell A1 This is a bag
In Cell B1 This is a bag with books

now in Cell C1 i need the mismatch words With books
C1 should show with books

I am now manually finding the words of cell A1 in Cell B1 and then writing the mismatched words C1 .

View 3 Replies View Related

Extracting Specific String From All Cells?

Oct 25, 2012

How does one extract a specific sting/words from each cell? Especially if [formatted data] varys in characters (not suitable for regular LEFT, MID, RIGHT functions use).

Sample Question.xlsx

View 3 Replies View Related

Store Cells Value As String Variable?

Aug 2, 2014

I have several words in sheet2.one word per line. every line in sheet1 should be checked and deleted if the line (colum 3 and 4) contains any of the words in sheet2. i decided to go with two for-loops, my Problem is a error in line 7 and 9 (indicated by arrows). it seems to me that ...Cells(...).Value is not allowed for strings. i already tried .Text, checked several VBA Forums but could not find a solution.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved