Splitting Date Values Into Various Cells?
Jan 28, 2014
VBA code to split the the date values into various cells. For example 8-Feb-14 in cell A2 will be splitted into three cells (C2, D2 and E2) to have the values:
Cell C2: 8
Cell D2: Feb
Cell E2: 2014 (Note that 20 has been added to the 14 to make it 2014)
I have attached a spreadsheet to understand what I mean. The results are in red and the raw data is in black.
test12.xlsx
View 9 Replies
ADVERTISEMENT
Feb 26, 2008
I think I need macro to do this but not sure.
I have a variable start date in cell A1 and end date in cell B1.
Lets say, start = 04/01/07 in A1 / end = 3/31/10 in B1 (date format used = mm/dd/yy)
I am looking for a way to partition these out in subsequent columns as follows:
A2 and B2 would = 04/01/07 and 12/31/07 (this section ends at the end of the first year specified in cells A1 and B1).
A3 and B3 = 01/01/08 and 12/31/08 respectively
A4 and B4 = 01/01/09 and 12/31/09
A5 and B5 = 1/1/10 and 3/31/10
I would like to be able to enter any start/end date values into cells A1/B1 and have the cells directly underneath split these dates out chronologically as described above.
The number of populated cells in rows underneath would need to grow dynamically based on dates input in cells A1/B1.
I have been chatting up mr.excel.com to many coworkers recently. Excel is becoming a big deal at my office. I hope to see them chekc this site out.
View 9 Replies
View Related
Jun 12, 2006
I have a date that is save as a date variable. Is there any quick functions that can be used in VBA that will get a date split by tax year.
For Example
If I was wanting to look at tax year 06 this would be from April 06 to March 07. The year would have to be determined by a entered year Input box.
After it has been split by year I then if it falls between the dates to split the date by Month. Is there any simple functions and comparitors I can use on a date defined variable.
View 9 Replies
View Related
Apr 22, 2014
I have some spreadsheets containing substantial rows of data, basically 3 columns as this:
Sample
Start
End
Difference (End-Start)
A
1500
1600
100
[Code] ......
And what i want to obtain is different rows of data such as every row has the same difference (20 in this case, without changing the first column), like the following (never mind the colors, they are only to make my point clear):
Sample
Start
End
Difference (End-Start)
A
1500
1520
20
[Code] ........
We can also think about splitting only one certain number into 20's, like in the case of samples B and C above, because I have already split the data into separate sheets based on their "difference" value, using link:
Copy to new worksheets. Do you think it is doable?
View 2 Replies
View Related
Jul 4, 2014
I'm building a work schedule based on 12 hour days and I would like to separate a full weeks hours, 84 total, into the Regular hours and the Overtime hours that the employee will be paid. The way it is set up is I have 1 spread sheet that has the schedule for a full year (using "IN" as a working day and leaving the cell blank as a day off) and on a 2nd page I've set up with a COUNTIF formula to total the number of days worked (IN) during each pay period and then it multiplies the number of days by 12 to get the total hours.
Where I am having trouble is that the employees are paid Regular hours and OT hours in a single day and I don't know how to separate the total hours automatically into those two types of pay. For the first 5 days of their shift they are paid 8 hours of Regular time and 4 hours of OT time, and the last 2 days of the shift they are paid 12 hours of overtime. In a total of 7 days they will get 40 hours of Regular time and 44 hours of OT time.
To break this down into simple formulas, ie. (84 -40 = 44), won't work because if an employee works more than their 7 days the pattern they are paid restarts again with the 8 hours of Regular time and 4 hours of OT time and etc. (8 total days would be 48 hours of Regular time and 48 hours of OT time, max of 14 days per pay period).
Is there a formula out there that can break a number down in sequence (8-4-8-4-8-4-8-4-8-4-12-12) and total them in two different cells?
View 9 Replies
View Related
May 8, 2014
I am trying to put something together on Excel.
1. In my first column(Let's call it "input"), there will be a variety of values from 1-10 which will appear in cells as 1,7,10 or 4,5,6,7 or any other similar variation. The quantity of numbers can vary and will always be comma delimited.
2. Following the first column are 10 additional columns. For simplicity, let's say they're labelled 1-10.
3. If 2,5,6,9 is present in the first cell, I want the number 1 in the columns labelled 2,5,6 and 9.
If 1,4 is present in the first cell, I want the number 1 in the columns labelled 1 and 4.
The input will only be in the first cell so I am hoping to find a way to automate the placement of 1's in the appropriate column depending on the input in the first column("input").
As a bonus, I'd like all cells not present in the first column to appear as a "0".
View 14 Replies
View Related
Feb 5, 2013
I've attached a workbook to explain my query further but essentially I have a data range, variable in size and I would like to split the range based on values in the range (delimiters if you like) into discreet ranges.
RanaldRangeSplit_01.xlsx
View 6 Replies
View Related
Jun 6, 2006
I have pricelists tables with 300 and more rows and about 50 columns. Three letter codes in first column cells are in strings separated by separator (,), I need to split this strings so that each three letter code would be in its own cell in first column, at same time all other cells in same row as original string data should be copied to rows near appropriate 3 letter codes. In attached xls file I have made small example how data looks before and how it should look after applying macro. Table should not move to other place on worksheet or on new worksheet, in attached example I moved it just to show what kind of form result should have.
View 2 Replies
View Related
Dec 18, 2013
I have a data that has several columns. But I need to separate the spread sheet based on one particular column values.
View 14 Replies
View Related
Mar 4, 2007
I have a table with data representing $income vs %Debt burden respectively. The data on the table per respective intersection provides number of accounts and total ($)value of accounts. I have tried to combine the two pieces of information into one column and have a diagonal line separating the two numbers. (sample table attached).
View 2 Replies
View Related
Jul 28, 2014
How to split the data in my cells
Currently it looks like this.
1 - 2 - 3,4,5
A - B - C
I would like it to look like this.
1 - 2 - 3
1 - 2 - 4
1 - 2 - 5
A - B - C
View 6 Replies
View Related
May 28, 2009
I know how to use concatenate but is there anything that will do the opposite. I want to take one cell that has both a date and time in it, and make the date in one cell and the time in another.
View 3 Replies
View Related
Oct 14, 2011
spliting a cell and moving them to 2 other cells.
Column D contains date and time in the format: 15/09/2011 08:01:01
I need them to be split into Date in column V and Time column W
Need the code to loop until there are no more values in column D.
Forgot to mention that the Column D is a date format and they need to be in there respective date and time format when split!
View 5 Replies
View Related
Feb 9, 2012
I'm trying to break up text in excel based on certain criteria and would prefer using a formula.
Criteria one: Must be 35 characters or less in length
Criteria two: Must include full words
So for example:
Cell A1: Sally bought a new purse
End Result:
Cell A1: Sally bought a new purse
Cell B1: Sally bought a (assume 35 characters)
Cell C1: new purse (assume 35 characters)
As mentioned earlier the only caveot is that it cannot break individual words IE: "Sally bought a ne"
View 9 Replies
View Related
Nov 14, 2008
I have question I need a macro which splits strings to multiple cells.
Here is how my data looks like.
Here how I want it:
PS: I prefer macro instead of formula. T
View 9 Replies
View Related
Jan 8, 2009
I'm having trouble splitting some data.
I have account codes like 1201.170170 that I must split into two cells containing 1201 and 170170
When I use "left" and "right" functions, it cuts off the zero on the far right. Assuming base data in cell F2...
=Right(f2,6) returns .17017 rather than the intended 170170
I've tried formatting the cells as text, but that doesn't seem to work either.
View 9 Replies
View Related
Oct 12, 2009
I've had a quick look at past posts and there is plenty on splitting cells but I haven't been able to find anything to help me with the following:
I've pulled address details from a database which have populated into a single field with each line separated by 2 'square' characters. I need to split each line into a separate cell for a mail merge. I've seen these characters before and always assumed they represent a space or 'return' and I believe is an ASCII character?
If I select a cursor in the cell the lines drop as they should with 1 square character left at the end of each line and it stays this way when I leave the cell.
I've tried CLEAN & TRIM functions; the first removes the characters, the second doesn't recognise the character at all. The most promising seems the 'Text to Columns' function, setting it as a delimited string, but I don't seem to be able to enter this particular character as the delimiter under the 'other' option.
View 8 Replies
View Related
Jan 18, 2013
Cell A3: Abbott, Robert M.,MD
Cell A4: Bussiere, Laura P., ARNP
Cell A5: Bradford, Melinda ARNP
I have this data in Column A and I'd like each person's last name to appear in Column A and the first name to appear in Column B and the credentials to appear in Column C like this:
A3 B3 C3
Abbott Robert MD
A4 B4 C4
Bussiere Laura P. ARNP
A5 B5 C5
Bradford Melinda ARNP
Also I'd like to be able to do the same with addresses:
In Row Q I have:
Q35: Jacksonville, FL 33204
Q37: St Augustine, FL 32092-1850
I would like this to appear in the sheet as follows:
Q35 R35
Jacksonville 33204
Q37 R37
St Augustine 32092-1850
I don't need the state in any cell. It can disappear as well as any commas. Is any of this possible?
View 1 Replies
View Related
Jan 21, 2014
I am attempting to split my workbook and save the sheets as individual files. Simple enough? yes. The issue I am running into is that when the sheets export I want their filename to be pulled from the value of a cell on a master control sheet. While I am pretty sure these can be done separately, not sure how to really do them as a whole within a one click button. Also an issue I am running into is that when I click my export button on my control page, the sheets that are saved have lost some of the page formatting.
SHEET1 is my control sheet
Here is the code that I was using to export the sheets.
[Code] ......
View 9 Replies
View Related
Jan 22, 2009
I have a column that has data with multiple values seperated by commas. I need to seperate out the values and add them to a new column.
Example:
Column A
good, cheap, fast
slow
good
cheap
cheap,good
I would like them to be added to column B as:
good
cheap
fast
slow
good
cheap
cheap
good
View 7 Replies
View Related
Aug 13, 2014
I want to split a cell with a formula and not use text to columns. I will have a cell a1 for example with 1d 4h 36m 34s in and want to have 4 formulas 1 in
a5
a6
a7
a8
.. so the result will be
1
4
36
34
I know you can split with left, mid and right but don't know how to do it with the desired results.
View 7 Replies
View Related
Jan 19, 2014
Was just wondering if it was possible to 'split' these cells (highlighted in the link below) into 2 columns without affecting the layout of the invoice.
[URL]
View 12 Replies
View Related
Feb 13, 2014
I basically have a five column spreadsheet containing address information. While most cells only contain one piece of information, I have quite a few cells that have multiple lines of data in them because the individual has more than one address.
Here is an example. Note that Rows 1-2 contain single address info for each individual person. However, row 3 contains an individual with 3 pieces of address information in the four right hand columns:
Row 1: Unique ID | Name | Street Address | City | State | Zip Code
Row 2: Unique ID | Name | Street Address | City | State | Zip Code
Row 3: Unique ID | Name | Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
Row 4: Unique ID | Name | Street Address | City | State | Zip Code
Row 5: Unique ID | Name | Street Address | City | State | Zip Code
Please note that some individuals have 2-4 different addresses.
I would like to manipulate the 5 rows of example data above so that when I am done I have the following:
1. 7 rows of data (5 individuals with 7 total addresses)
2. Automatically copy and paste the unique id number and name into the two new rows that were created so that I have the following:
Row 1: Unique ID - 001 | Joe Chang | Street Address | City | State | Zip Code
Row 2: Unique ID - 002 | Joey Chung | Street Address | City | State | Zip Code
Row 3: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 4: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 5: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 6: Unique ID - 004 | Jane Derry | Street Address | City | State | Zip Code
Row 7: Unique ID - 005 | Julie March | Street Address | City | State | Zip Code
View 9 Replies
View Related
Jun 17, 2006
My cell contents looks like this.
H1111111111111
I want it to look like this..
H11-111-111111-11
I know this can be done by formula but i dont know it. This info is in col B.
View 2 Replies
View Related
Feb 19, 2007
I tried too much to split one cell Containing more than one lineI need to put every line in different cell.
My small example can describe better ..
View 8 Replies
View Related
Dec 2, 2009
I have a spreadsheet that has been given to me by someone else, and unfortunately it has merged cells in it that are causing some trouble. I need to have a way to unmerge the merged cells, but for the data in the merged cell to then be copied into each cell that it splits into.
I've attached two spreadsheets - unfortunately I can't really attach the real one since it has research data in it, so I've reduced the size of the file and replaced some of the text. The first file shows how the file starts off, and the file named "result" shows how I would like it to be.
My real file contains some 10,000+ lines of data, and the merged cells are of varying sizes, with no consistency to the size, so I'd like a way to automate this instead of copy and pasting into every empty cell after I unmerge them.
View 2 Replies
View Related
Nov 12, 2009
I have names that look like this:
SmithJohn and i want to seperate into two cells so it looks like
Cell 1: Smith
Cell 2: John
View 9 Replies
View Related
Sep 12, 2009
I need to do is, on sheet 2 is to have a formula which will count all cells in column A containing dates from 1/1/2009 to 31/1/2009, Another column will count all dates from 1/2/2009 to 28/2/2009 and so on. I have tried the countif format but this does not seem to work.
View 4 Replies
View Related
May 3, 2006
I need to count cells withdates in theme in a column. So that would be a CountA function; but only if the values in the cells are within a certain date range, a COUNTIF function. Here's what I thought:
=COUNTIF('All Employees'!O1351:O1364,">12/31/05,<2/1/06")
It returns a zero, which I know is not correct, as I checked it on a smaller sample....
View 13 Replies
View Related
May 22, 2014
I'm using the following code (found here: [URL]......) populate dates in row 13 for a dynamic Gantt Chart...
[Code] ....
It works perfectly to display daily dates in the mm/dd format. Now I want to have an overarching month/year displayed over the entire range for any particular month by merging and centering the cells above the month's dates the above code populates, and pull in the month/year formatted as mmm-yyyy. I've attached a mock up I did manually to convey the desired result.
MergePic.JPG
View 1 Replies
View Related