On to what brought me here; I have a spreadsheet with a column containing an address, eg '12 SMITH ST SOMESUBURB NSW 2001'. I'm looking at splitting this cell in half after the street and moving the second half (suburb state postcode) into the next cell, which i've managed to do with a series on InStr statements.
Now the fun part is that not all these addresses are streets, some are avenues (AV or AVE), roads (RD), place (PL), drive (DR or DRV) etc. Initially i just did this:
In a macro I want to automatically insert a formula in several cells. The formula depends on other cells, and I want to be able to manipulate these cells with variables. Here is my code:
[Code] .....
All my variables are declared:
Sheets("DATOS YTD 2014").Cells(I, Semana + 1) is the cell I want to be able to chose due to the variables Sheets("DATOS YTD 2014").Cells(I, 3) is the reference cell for the VLOOKUP formula, that will vary with I SheetMonth.Range("B3:W172") is a range in the sheet SheetMonth which is fixed
The error message I receive is the following: "Run-time error 13, Type mismatch"
I precise that the next step is to make the ",6," part in the vlookup formula also variable... but I guess once my current issue is solved this one will be a piece of cake.
If I have a string which contains 3 words, is there an easy way of separating out the consonants into one string and the vowels into another (spaces should be ignored)?
The only way I can think of doing it is to go through the string item by item and comparing the letters to a list of vowels and using that to do the separation.
I'm stumbling upon something I just can't figure out. I thought I was being very clever using the Split() function, and it did all work beautifully for a while. I've got a list sort of like this:
Helloworld Hello of World Hello1 of Planet And I want to be able to run the following code.
For Each u In units d_type_a = Split(u.Value, " of") Debug.Print (d_type_a(0))
Select Case u.Value Case "Hello" stuff... Case "Helloworld" stuff... Case "Hello1" stuff... End select next
But it fails on the Debug.print with a "Subscript out of range, nr 9" error. The debug is just there because it doesn't want to work. The debug.print DOES out put "Helloworld" into the Immediate window but then still fails which sorta confuses me. The best I can figure out is that it just doesn't quite like the string without an " of" in it.
I have a table of data, and would like my userform to select parts on this depending on different variables.
When I run the macro "Show_UserFormCalculatePrice" or click the button "Calculate Price", the userform is activated which has 2 comboboxes, Date and Service.
When a certain date a service are selected I would like the the dish name to show in the labels of the userform.
My main issue is that there will be multiple dishes that will correspond to the data, and I would like them to be vertically listed in the labels depending on their number (Column A).
Essentially I would like to run some sort of If function:
If the date and the service correspond to the criteria then they are shown in the labels.
I am trying to to work out how to compare two string variables that I can see with my eyes are clearly a match but getting the right syntax to convince VBA they are the same is my issue.The first example is:
Direct Credit 158824 BRANDON DONNA C/ Lak30
the second example is:
Direct Credit 158824 BRANDON DONNA C/ 30 Lake Vue Parade
but that still would not get a match that I can find code for.
i am chasing the "holy grail" in VBA and I will leave the records that do not exactly match to manual processing although i hate to give up that easily
I have recently come across a VBA macro, which reads from a text box within an excel input sheet, copy the text content, and send it via email. However, when the text content started to go beyond a certain number of characters, the text that comes out of the email, got truncated. I presumed this is something to do with the limitation to the string variables where the string " messagebody$ " which is used to read the text can only take up a certain bytes.
I was looking for VBA help, and somehow, it mentioned something called a variable-length string. Would that be a solution to my problem, or how is that used ?
I need a forumla that will dispay a set text message in a cell based on the date in another cell.
I need cell A1 to display the text message "Forwards Booking Date, No Action Required" Where cell A2 has a date entered in it that is the same as todays date or greater - i.e. in the future.
And if the date is in the past for no text message to appear.
I have create a menu with buttons that are attached to the different projects of vba. This menu will be put in the server of my department so all my colleagues can take profit of the macros. Is a menu in an excel file that only contains the vba projects, not the sheets where the macros are supposed to run. My problem start when you want to open the file. It will always be in the same disk "P:COAP", and then there are more subdirectories (year, month)... so the total path, for example, this month is:"P:COAP2007200706". But every month, it changes, logically.
The problem is that i need to open a file with the name "COAP-200706 Concentració Empresa Emissora" in this case... the only thing that changes is month, and year... I want to close the booke i choose, to avoid errors, if the name of the workbook chosen is different to a part of this string. In this case, i'm trying to close the book if the name of the file or the book don't contains the string "Concentració Empresa Emissora", without saving changes, of course... because sometimes people have chosen badly the files and they've made a disaster. If the file chosen contains this string in the name i want to continue with all the code that is written after.
ChDrive "P:" ChDir "P:COAP2007" NouFitxer = Application. GetOpenFilename If NouFitxer = "" Then Exit Sub Workbooks.Open Filename:=NouFitxer If ActiveWorkbook.Name <> "*" & "Concentració Empresa Emissora" & ".xls" Then Msg = MsgBox("Error in the file opened. Look at the name of the file next time." _ & vbCrLf & "The program will close without finishing the process. Start again. Thanks", _ vbOKOnly + vbCritical, ("END OF PROCESS")) ActiveWorkbook.Close Savechanges:=False Exit Sub End If
I made the formula work great, however I want to cut it down and simplify it and make it easier to manipulate... as opposed to having the filename written every so many times.. replace with a loop instead.... so:
Private Sub Weeklytestt_Click() Dim varCurDate As String If DateYesterday.Value = True Then Answer = "1" If DateToday.Value = True Then Answer = "2" If DateTyped.Value = True Then Answer = "3"
Select Case Answer Case Is = "1" varCurDate = Format(Date, "yyyymmdd") varCurDate = varCurDate - 1 Case Is = "2" varCurDate = Format(Date, "yyyymmdd")..........
I work with data that varies in row numbers but is consisten in column width. I am trying to write code that will create a named range for the data but be flexible to expand or contract based on the amount of data that is pulled in. Below is the
Const lngLastPossRow As Long = 65536 Dim strDataRng As String strDataRng = ActiveSheet.Name & "!R4C1:R" & Range("a" & lngLastPossRow).End(xlUp).Row & "C17" Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select ActiveWorkbook.Names.Add Name:=("Data"), RefersToR1C1:= _ strDataRng
While the result creates a named range called "Data" , it does not allow me to reference and data in any formulas ( sumif's, etc). Can someone tell me what I am missing. It appears to be returning the wrong data type (string as opposed to range values).
I've a big problem getting the Constraints in excel solver to use variables. It seems that the only accepted variable type in the contraints are STRING variables. THe following simple example works AS LONG AS the variable apa is a STRING value and as long as it doesn't contain decimals....
So the question is. How to use varialbes in the FormulaText argement other than string values as integers?
I have pricelists tables with 300 and more rows and about 50 columns. Three letter codes in first column cells are in strings separated by separator (,), I need to split this strings so that each three letter code would be in its own cell in first column, at same time all other cells in same row as original string data should be copied to rows near appropriate 3 letter codes. In attached xls file I have made small example how data looks before and how it should look after applying macro. Table should not move to other place on worksheet or on new worksheet, in attached example I moved it just to show what kind of form result should have.
Split the single into two, is this really possible in excel?To be precise dividing cell A1 into two different cells(No merging, No text to column option).
I'm currently working on a little project and at the moment it's my programmign skills letting me down lol, I'm litterally about to start pulling my hair out over not getting this to wokr. I extract data from my device which is in the following format.
I know how to use concatenate but is there anything that will do the opposite. I want to take one cell that has both a date and time in it, and make the date in one cell and the time in another.
I have a data which is the Table-1 in one sheet and in another sheet i have a data With Table - 2 only Item_Name column has a data, I need to fill the F_Name and L_Name column data by splitting the values in Item_Name and comparing with Item1, Item2 & Item3 if all the three values match return the N1 and N2 column values to F_Name and L_Name for that particular Item Name
Is there a formula or function that I can use that will allow me to split data like below into two separate cells?
In one cell, I have - Narre Warren Black 6.8-44 & in another cell - Pakenham Maroon 5.4-34 just as an example. (There are quite a number of cells like this) I would like the cell split to show - Narre Warren Black in one cell and then 6.8-44 in the next cell. The same is needed with the following cell - Pakenham Maroon in one cell and 5.4-34 in the next cell.
Because some have one space and some have 2 or 3 I can't use 'LEFT' and I can't use Text to Columns as far as I can see.
I have two lists of over 10,000 text messages each. Each text is in the first cell of the column, with a few random rows being skipped here and there. Within each cell is a lot of information. The information is divided by semicolons, though. So, it's something like. 123;ContactName;+123456790;Date Time;Message
I have two files like this, one incoming and one outgoing. I need a way to not only split the text into different cells (each piece in a separete column), but splice the two files together. I realize if I could section the text into the parts, I could just sort it, but I figured it's better to tell more than less, for the sake there might be an even simpler way of doing it.
Formula or macro that can accomplish the following? In the original data, the text under 'A_Services' is contained within one cell. I want to break out the data as indicated in multiple rows, but only include the first 5 characters.
Orginal Data appt_number date length A_ICOMS_WO_TYPE A_TOTALPOINTS A_SERVICE_CODE A_SERVICES
Each row in my spreadsheet is a record. Unfortunately, for one cell, the data base that the info came from has in more than one piece of data in a cell in the data dump into Excel for that record. Each piece of data in the multi data cell is seperate by a ctrl enter hidden break.
I need a seperate record tied to the original record for each item in the multi data cell so that I end up with a flat file with unique records and data on one row.
Is there a way to do this other than manually? I'd like to have a macro since I run into this quite often depending on the client.
I've attached a workbook to explain my query further but essentially I have a data range, variable in size and I would like to split the range based on values in the range (delimiters if you like) into discreet ranges.
