How can I make excel sum up a colum, and ignore cells shown as #I/T?
This error sign might not be the same in the english version of excel.
If I try to sum up cells with the error value, the feedback will also be #I/T.
Faulty formula is now; =(SUM(B307:B316))
I have a column of numbers and want to make sure everything has been entered correctly from our scanning software. Basically, I want to automatically highlight any cell that has any letter in it (e.g. z12o2 instead of 21202 or R705 instead of 5705), ignoring any cells that contain only numbers. I haven't had any luck using conditions based on formulas like =ISTEXT.
View 2 Replies View RelatedI have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
I have a spreadsheet for which I have to set up a formula to get the minimum value from a range of cells, but that range can include blank cells, errors (#DIV/0) and zeros, all of which I want to be ignored. I can work out how to ignore EITHER the zeros
(=MIN(IF(C10:G100,C10:G10)),
or the error cells
(=MIN(IF(ISNUMBER(C9:G9),C9:G9)),
How to exclude both. If I try to combine both of these exclusion criteria it doesn't work and I end up with the answer #DIV/0, which is one of the values I want it to ignore.
I have a workbook with several sheets, but just on the sheet called “sales” I need a macro to do the following:
If F4 = CST
Then Lock down H4-S4 and AM4-AZ4
But if F4 is changed to something else I need H4-S4 and AM4-AZ4 to be unlocked
Is a password necessary for this? It is ou
I just want it to lock and unlock, not protect and unprotect.
I am having trouble with my VBA code, it hides groups of rows (projects) based on the contents of corresponding cells above. these have either 'yes' or 'no' in them (indicating if the person is active in that project). The Yes/No is formula based from another sheet.
what I am trying to do, is have particular cells, withing the projects rows, locked (as they are also populated by formulas) but have other cells open for editing.
when I try and do this i get an error with my VBA, i am assuming that as cells are locked, the VBA is prohibited form hiding inactive projects/rows. i tried an addition at the bottom but this hasn't worked
Code:
Sub Worksheet_Calculate()
Dim i As Long, StartRow As Long, EndRow As Long
StartRow = 13
[Code]....
I want to have a few words shown based on figures in specific cells. I not quite sure how to explain, but i will try my best:
A1 = 5
A2 = 0
A3 = 7
The function i am using looks something like this:-
=IF(A1<6,"Do I Have Sickness Self Cert?","Do I Have Doctor's Paper?")
However, by using this function, if the cell is empty it still shows the first wording when i need it to show lets say between 1 & 6 shows the first wording and more than 6 shows the second wording! If you know what i mean... I know what i want to do but cant really explain it very well.
Maybe it should look something like this but it does not work the way i am doing it.
=IF(E156>1<6,"Do I Have Sickness Self Cert?","Do I Have Doctor's Paper?")
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I have a row of cells, say, A1 to G1. I wish to sum the values in cells, say, A1, C1, F1 and G1 only. The chosen cells can have values 0, >0 or Blank. How do I sum the values and ignore the blank cell(s) without getting #VALUE!? Filling the blank cells with "0" is not an option.
(Any blank cells may have a value added at a later date).
Edit: I could use multiple 'IF' statements, but this is cumbersome. There must be a simpler way.
I am working on 2 tabs in a workbook.
The first tab has raw data - The second is my summary.
TAB1 -includes
column A = name range column B = Evaluation Result 1 %
column C = Evaluation Result 2 %
column D = Evaluation Result 3 %
column E = Evaluation Result 4 %
TAB 2 on...The remainder of the tabs are summary for each name in column A of Tab1.
each summary tab includes
A3 = name
A7 = Evaluation Results 1
A8 = Evaluation Results 2
A9 = Evaluation Results 3
A10 = Evaluation Results 4
The evaluation results can include any % from 0-100 and can also be blank. I need to count the 0 but ignore the blanks so for example on Evaluation Result 1, Im using
=SUMIF(Tab1!$A:$A,Tab2!$A$3,Tab1!$B:$B)
So I can find the name in the list of names and the % score for the evaluation - however I don't know how to ignore the blank cells. If the cells are blank I would like to see "-". if they are 0% I would like to see the 0%.
I have a graph that references a column which contains a formula. In the instances where this formula produces a zero value or a DIV/0 error, I would like the graph to contain a blank space.
As it is now, the zero or DIV/0 cell graphs as a zero value. I have tried using an IF statement which takes any zero or error and replaces the cell value with "": IF(A5/A6=0,"",A5/A6)
Even though the cell comes up as blank... a zero value still appears on the graph. The only way for me to have the graph ignore that cell is to go into the cell and delete the formula. This is unnacceptable b/c the data is updated daily... I do not want to have to go through my data every day and delete cells.
I have cells A1 through A10 which can contain numbers or text. I want to be able to sum this range while always ignoring the ones with text so as to eliminate the error when summing.
In the attached I have a problem with my code,it involves empty / blank cells in my userform (control panel in sheet "overview"). How do I ignore these cells?
Udklip.jpg
Dropbox link: [URL] ....
Is it possible to make the userform list to not include blanks?
The code is:
VB:
Private Sub UserForm_Activate()
Dim objDic As Object
Dim var, var1, lng As Long
Set objDic = CreateObject("Scripting.Dictionary")
With Worksheets("ServiceDriftMaaling")
[Code] .....
Does this function ignore invisible cells (autofilter) ?
If not, what could be an alternative?
I want to create an excel sheet so that I can price out computer hardware so that I can see what it will cost compared to what we would sell it for I have the basic idea laid out but I'm running into a problem with cells that don't have any information in for pricing. I get a "#DIV/0!" for the formula that i have worked out.
I don't want to change the information in the cells that I have for pricing I just want it to show 0 and call it good. The other isssuse that i'm have at the bottom of the page I'm trying to show the totals for everything.
I did a simple (=F4:F34) to Show the total of all the information in the column but it's showing up "#VALUE!" I know that this is from the earlier error so if I could be shown how to make these errors go away that'd be great the final product that I would like to have is I want to use a macro to transport some of the information to a word document so that I can print it off and show our customers a quote without them being able to see the cost on everything.
In cell C1 I hace A1-B1 and in cell DI want to display the status of the cell C1 like this : =IF(C10 ; "NOT OK" ; "OK") This means that when the value of the cell C1 is different then 0 cell D1 will display "NOT OK" and if the value of cell c1 is 0 then D1 will display "OK".
The PROBLEM: Because the cell C1 contains a formula (A1-B1) the D1 cell will display "NOT OK" even if the cell C1 doesn't show any number.
I have a spreadsheet and need to ignore one of the cells (P29) if cell value is Zero or Blank and display a blank cell which in this case is (Q2
My current formula is
=SUM($P$19:P29)/2
I want to use this count function =COUNTIF(A$1:A1,A1) , but don't count blank cells, if cell is blank answer is 0 zero .
Sheet1 Â AB10.6127.813Â 041.215Â 06Â 071183190.621020.91114112Â 0137.82143.91150.63Spreadsheet FormulasCellFormulaB1=COUNTIF(A$1:A1,A1)B2=COUNTIF(A$1:A2,A2)B4=COUNTIF(A$1:A4,A4)B7
=COUNTIF(A$1:A7,A7)B8=COUNTIF(A$1:A8,A8)B9=COUNTIF(A$1:A9,A9)B10=COUNTIF(A$1:A10,A10)B11
=COUNTIF(A$1:A11,A11)B13=COUNTIF(A$1:A13,A13)B14=COUNTIF(A$1:A14,A14)B15=COUNTIF(A$1:A15,A15)
I am doing an average of a column of cells. How do I tell excel to ignore the blank cells in the column and not calculate them in the average?
View 9 Replies View RelatedI am trying to do is add together numbers in the same cell though in different sheets. However some of the sheets will not have numbers in them and it comes up with an error value. How can I ignore this and still have a value be returned if there is no values entered in some cells?
View 4 Replies View Relatedi m trying to add values in different sheets though some of the values have a #n/A in them and i want to ignore this = SUM(Set1!D9,Set3!D9,Set2!D9). However Set1!D9 is an error and I would like to ignore this value!!
View 2 Replies View RelatedI have a list of assessment scores for students with a matching grade in text form. I want to show the percentage of students that receive "Adv" and "Pro" grades out of the total number of students (cells with data). But I have extra cells in case students are added during the year. I need to have the formula ignore any empty cells and count all of the "Adv" + "Pro" grades divided by number of students with data. I would like to do this by including the extra cells in the formula so I don't need to amend the formula should students be added. This is the formula so far. Maybe there is a totally better way to write this formula.
=SUM(COUNTIF(C7:C60,"*"&{"Pro","Adv"}&"*"))/COUNTA(C7:C60)
[url]
In the above, i am trying to calculate the time taken between queries. I do not want any times/queries that are from someone else on the network to be counted.
I need something to ignore the blank cells, and take data from the next cell above which has data. I3, I8 and I14 are currently the trouble spots, and should be displaying 00:00:00, 00:04:00 and 00:06:00 respectively.
Note that someone from the network could have literally thousands in a row before I perform another query, not just alternating like the screenshot.
B is the real life time the query was performed. F is how long the query took. F does not take in to account the seconds between queries, which build up, so i am using B.
I have tried to set up a list of cells to highlight in red any numerical values which are greater than 0 using conditional formatting. This works fine, except that all blank cells are also highlighted in red. Formula is currently: cell value is greater than 0. What do I need to do to ignore the empty cells?
View 2 Replies View RelatedHow to get the LARGE function to ignore hidden cells? Is it possible?
I have a filter in a data set and am using a macro to pull in the top 5 largest values.
I have a table that looks similar to the below. I want to be able to extract the numbers between the brackets and add all up in the last column (as shown in example below).
I have used something like the below however it returns #VALUE in column F because of the empty cells.
(SUMPRODUCT(REPLACE(A1:F5,1,FIND("(",A1:F5),"(")+0))
I need a formula that will be applicable even when there are empty cells and return the results as shown.
A
B
C
D
E
F
Worker (3)
Engineer (23)
Manager (1)
27
Plumber (2)
Designer (20)
22
i get a problem in preparing a roster i went to ignore blank cells in calculating rank. and also i went to make the sum to be empty is one of the cells in a range is zero
View 1 Replies View RelatedSo I am pulling some data fields from a pivot table....most of the cells will be a zero....but for the ones that populate text, I want to concatenate the words together with a comma in between into the AN cell at the far right and ignore the zero cells....
View 4 Replies View RelatedI have conditionally formatted (Bold Italic) some data (the highest value in each column) and I have a macro that hides rows dependent on one value in that row. However I would like the conditional formatting to apply only to the visible cells, so that if the maximum value is in a row that is hidden the conditional formatting is applied to the highest, non-hidden value.
View 9 Replies View RelatedI need to get a subtotal of a range (eg: A1:A30), however some cells in this range have #N/A errors due to particular formulas they contain. I could go into these cells and add a formula which 'catches' these errors, but there are far too many given my current time constraints.
Is there any way to use SUMIF to add the cells which do not contain errors and skip the ones that do? (ie: SUMIF($A$1:$A$30,""&"Error Parameter")).