I am creating a log to keep track of my start and stop times when I work on a project. I have two columns labelled START and END and I can use a macro button to make the current date and time appear in the cell under these headings. What I haven't been able to find is a way of getting the macro to move to a new blank cell ready to accept the next entry. For instance, move one cell to the right or move one cell down and one to the left.
Can anyone tell me how to do this? (recording it just names the cell so it always goes back to that named cell.)
I have a form im using for one of my spreadsheets and it involves alot of data entry, many times alot of the data will be the same not like one entry after another but say the second, fifth, twelfth and fourteenth data entry's will be almost identical. Is there any way i can make the form remember previous entry's kind of like the spreadsheet does? so you start typing and it automatically shows what you typed that was similar into that column and you can hit enter and it will automatically fill that cell out for you. But instead of columns and cells these would be entry box's in a form.
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
Trying to write an if statement giving a simple value of 1 if a time is outside of weekday hours 8am to 9pm. Cell formatted as (6/3/17 2:15 PM). Function should report "0" value as this is a Tuesday between 8am and 9pm.
A cell formatted as (6/3/14 7:54 AM) should result in "0" value.
I have a bunch of data and I want to be able to count the number of entries that fall within each of the 24 hour increments in a 24 hour clock. (military time)
For 12:00:00 all times would be between and including 12:00:00 and 12:59:59
Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
Many years ago I created a complicated spreadsheet that calculated employees's leave, sick, vacation etc. The timekeeper would indicate the amount(s) used for a particular day and it would automatically calcuate. The problem with this is that the time keepers do not use .25, .50, or .75 for the fractured time. Instead they used .15, .30 and .45. Previously, I used a convuluted if statement looking to the right of the leave to figure out what and how to calculate it and I'm trying to revamp it to make it more streamlined.
i have a slight problem i have this script which i want to run on all worksheets which are numbered (i.e. 1,2,3,4 etc) and to delete the rows in the F128 range which is under 00:05:00. I just cant figure it out to get it working.
I have a database of over 10,000 entries. I am trying to get the average time for four specific entries (department, test 1, test 2, test 3). I did an averageifs for the tests individually and calculated the average time individually.
The three tests comprise of the department.
Average of test 1 = 40.8 Average of test 2 = 39.9 Average of test 3 = 94.8
Average of dept using the averageifs is 41.3 Average of dept by taking the average of the values above is 58.8
I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
I need to generate a report that indicates how long it took a vendor to respond, and indicate if the time was less than 2 hours.
I'm having trouble with a formula that will indicate how long it took for the vendor to respond during business hours (8-5 monday through friday). I can easily calculate the total elapsed time, but I'm at a loss on how to account for the after hours time period.
I'm trying to find an easy method of recording the available hours of operation for an airfield which can close a couple of times a day due to weather.
I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows: 12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:
09:57:145 and 08:12:055 would give a difference of 1:45:090 12:07:985 and 18:59:788 would give a difference of 6:51:803
To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
I have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column <> 4 Then Exit Sub If Target.Row = 1 Then Exit Sub If IsEmpty(Target(1)) Then Exit Sub If IsEmpty(Target.Offset(0, -1)) Then Target.Offset(0, -1) = Date Target.offset(0, -1).numberformat = "yyyy-mm-dd" End If End Sub
The 'gist' of what I need is for events scheduled (top of spreadsheet), no school can be placed into an event within 29 minutes (because one-half hour apart IS ok). The time increments are on the left side of the spreadsheet (rows). I'm trying to "automate" somehow so that if we try to plug a school into an event too soon from their last event, the spreadsheet won't allow it.
I am trying to build a spreadsheet to calculate how many hours have elapsed between to entries; start time (H10) e.g. 9:15 AM and end time (I10) e.g. 12:15 PM. The formula that I am using in the calculation cell field (J10) is (I10-H10+(I10<H10))*24. This formula works great till I wish to include in an IF statement. What I would like is if the total hours calculated with the formula (I10-H10+(I10<H10))*24 is less than 4, return 4 (hours) otherwise the value. As well if there is no start time nor end time entered then return zero.
I have a large data set which contains four coloumns: Supplier, Supplier number, order number, and date/time of delivery. The date/time coloumn is formatted as YYYY-MM-DD HH:MM with a 24h time notation. What i want to do is to find deliveries that occurs within 1 hour and that are from the same supplier. So i basically want to group (?) the data with regards to the suppliers and then, within these subsets, check for date/time entries that occurs within 1 hour from each others by "reading" each date entry and compare it to the following one(s) (and maybe stop comparing when the 1 hour interval is passed)?
Furthermore, even if this one might be very hard, it would be good if i could make sure that the entries that are "tagged" as within a 1 hour interval, wont be used as basis for a new interval or be included in other intervals.
The result i am after would be number of 1 hour intervals for each supplier and the number of entries in each interval.
I have a UserForm which writes data to rows in a master spreadsheet. I'm attempting to write some vba code for a CommandButton in the master spreadsheet which can identify and delete duplicate entries based on "user ID", "Date", and "Time". I would like the CommandButton to retain the most recent entry from a user and delete all previous entries.
My master sheet is set out as such... A, B, C, D, UserID, Date, Time, Response
The users could potentially submit multiple entries on the same day. Ideally I would like to be able to click a CommandButton and delete each user's submission but retain their most recent one (based on "UserID", then "Date", then "Time").
I've searched all day for a solution and I've come close but I can not figure out a code that accounts for my three variables ("UserID", then "Date", then "Time").
I am trying to make book to represent time frames from sheet 1 to sheet two. The times are at the bottom of the sheet represented by letters from the alphabet eg, A is 6:30 in the morning to 2:45 in the afternoon. B is 8:45 in the morning to 5:00 in the afternoon ect, ect . I need to have the time represented in color or maybe a diagonal line through the cell in sheet 2 where each letter and corrosponding time frames are. Eg, I have given an example of the time frame "A" in column C in sheet two. I will make a sheet for each day of the month, so all I need is an equation for row "C"(Monday the 16th) in sheet 1.
I have 2 cell, A1 and B1. When any data is entered into A1, B1 will display the time corresponding to when the data was entered.
I was thinking about function for B1 would be "=IF(A1="","",now()) ". It worked such that it will display the time, however the value in B1 will automatically update itself if I were to randomly input any data in any other cell too.
For example, I input "testing" in A1. B1 display "11:20PM". Ten minutes later, I input "hello" in A2. B1 now display "11:30PM".
Anyone know a way to stop B1 from updating? or only update when new data is entered into A1 only?
I have a label that displays the date using the = now code
[Code] .....
When I open the form the date and time is correct, but it doesn't update while the form is open. Is there a way to make the date and time always correct while the form is open.
For example: - I have 3 pivot tables with the same row 'Media' (TV, Neswpaper, Magazine) and each has count as the data field (number of people who read/watch) then each pivot has a different column, Region, age, ***.
If I change the row of the first pivot to only show TV, how do i code it so pivot 2 and 3 only show TV also? I may have upto 20 pivots inthe end.
I found the below code to do this for page fields but can't adapt to rows -
HTML Private Sub Worksheet_PivotTableUpdate(ByVal Target As PivotTable) Dim ptTable As PivotTable, ptItem As PivotItem, vFields As Variant, lngField As Long On Error GoTo ExitPoint vFields = Array("filed1", "field2", "field3")
Application.EnableEvents = False For lngField = LBound(vFields) To UBound(vFields) Step 1 For Each ptTable In ActiveSheet.PivotTables If ptTable <> Target Then With ptTable.PivotFields(vFields(lngField)) .CurrentPage = Target.PivotFields(vFields(lngField)).CurrentPage.Value End With End If Next ptTable Next lngField ExitPoint: Application.EnableEvents = True End Sub
I want to make a Word Clock. Instead of showing the time as "12:30" I want it to show the words "It is half past twelve"
To Do this I've created a Square of Letters on an excel sheet (one letter per cell!) with black letters and black back grounds, when it is 12.30 I want the relevant letters to (cells) to change the text coulor to white so it shows up.
The cell I'm using are from D8 to P19 and the time is shown in A1
So lets say at 12.30 Cells D9, F12, H14 and M16 need to change from Black Text Colour to White Coulour,
I need a code or some VB that says "If A1 = 12.30 the Cells D9,F12,H14,M16 = White Text Colour, if not Black Text Colour".
I am using this formula to combine Excel Dates & Times which is in seperate cells. day Month Year Time
=B13&"/"&C13&"/"&D13&F13 and trying to convert to Numerical Time for further calculations. I have tried many Format variations but nothing seems to work.
It will show the correct Numeric Time if the Formula: =NOW() is used in Cell K12 But it won't show the same from the imported data that is Text format in Cell I 12
The sample W. Book shows a better explanation of the problem. The end result is to show how much time has lapsed in Cell M 14 by converting Time to Numerical and simply do the sums. Works otherwise but not in this instance. The reason to trigger various macros according to pre-set Time Limits Etc.
now i want to make 5 different graphs one per each group. Now i am making them manually in excel but it is taking lot of time to format each graphs to get unique graphs. I am attching sample file and graph for better understanding.
