I'm trying to find an easy method of recording the available hours of operation for an airfield which can close a couple of times a day due to weather.
The attached sample explains it better.
I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows:
12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:
09:57:145 and 08:12:055 would give a difference of 1:45:090
12:07:985 and 18:59:788 would give a difference of 6:51:803
To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
I am looking to record the history of multiple cells at one time instead of as soon as I hit enter after changing one cell's value. There are other threads concerning just the history of a single cell as you input another value and hit enter.
So for example, I have multiple cells that are calculated using formula's in their respective cells using input cells in the worksheet. I will be changing the input cell's values in the worksheet to update the calculated cells. I want to record the input cell's values as well as the new calculated values at one time after changing the input cells. I dont know if I can add a button to a cell or something to that accord to accomodate this. I am still new to vba coding in excel.
From there forward I will interate this as new situations arise and want to record the input and output (calculated) cells on another tab or worksheet along with the date it was recorded.
A person spends some time performing various works (work1, work2...) in a day. Each work can be further divided into tasks (task1, task2...).
I need to find the total time spent by the person doing all these activities.
The attached spreadsheet will explain it better.
I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
There should be a Login and Logout Button and a Start time end time button to record data to the next sheet in the workbook. Also it would be great if it includes a Break and EndBreak button so that the time taken in the breaks gets recorded in the next sheet in the Workbook.
Every Morning colleagues should click the LoginButton to start and click the logout button at the Day end to get the total production time recorded in the next sheet. (Total production time should be Total time taken minus breaks). We have a 9 hour shift.
Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedSay i wanted to track the changes in a cell, i.e. if a number changes in a cell it records the new number in a new column. The following macro achieves this for one value; say type a value in a15, it records the number changes in column D;
Private Sub Worksheet_Change(ByVal Target As Range)
Dim DestCell As Range
With Target
If .Cells.Count > 1 Then Exit Sub
If Intersect(.Cells, Me.Range("a15")) Is Nothing Then Exit Sub
If IsEmpty(.Value) Then Exit Sub
If IsError(.Value) Then Exit Sub
[code]...
But what if need to track the value of 4 cell changes in different columns, and record these values into different colums of their own? So for example, if i had a value in a1, and wanted to paste the changes into D; if i had a value in a2, and wanted to paste the changes into E; if i had a value in b7, and wanted to paste/record the changes into F etc etc.
I thought about running the macro for each cell but it wont work, for example i tried;
Private Sub Worksheet_Change(ByVal Target As Range)
Dim DestCell As Range
With Target
If .Cells.Count > 1 Then Exit Sub
If Intersect(.Cells, Me.Range("a1")) Is Nothing Then Exit Sub
If IsEmpty(.Value) Then Exit Sub
If IsError(.Value) Then Exit Sub
[code]...
This may be a bit vague but here goes.
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
I've got a time difference from 8:00AM - 12:30PM as 4.30 I'm trying to get the minutes, .30, converted into a 6 minute increment, .5. Is it possible to do this and if so how would it be done? Below is a chart of how the time is converted from 6 minutes increments into decimal form.
6 = 0.1 36 = 0.6
12 = 0.2 42 = 0.7
18 = 0.3 48 = 0.8
24 = 0.4 54 = 0.9
30 = 0.5 60 = 1.0
i want to ask for a reason if a item is late where M & line is the time it should have left and N & line is the actual time it left.
TL is the difrence between the two times
i want the input box to read " DRIVER DISPATCHED 30 MINUTES LATE PLEASE ENTER REASON"
but it returns "DRIVER DISPATCHED -.11233543 E2 MINUTES LATE"
how do i format this to show the difrence in minutes
TL = Range("N" & Line) - Range("M" & Line)
late = InputBox("DRIVER DISPATCHED " & TL & " MINUTES LATE PLEASE ENTER REASON")
I'm trying to calcuate the time difference using military time.
For example:
A1 has 0400 A2 has 0430 A3 SHOULD be :30
B1 has 1500 B2 has 1715 B3 SHOULD be 2:15
Unfortunately I either keep getting all zero's, or the correct answer but without the ":" in the answer (b3 would look like 215)
I would like to have people enter text in the cells in column A and record the Date and Time they did it in the same cells in column J.
I have tried (in cell J1) If(A1<>"", NOW(),"") but of course the problem is that it keeps updating to the present time. I tried using INT(NOW()) but that doesn't work
I know I could simply Copy and Paste Special over each cell in the J column but that seems terribly inelegant.
Formula query
Column “A” list of dates correspondence in
Column “B” list of dates correspondence reply out
Need to calculate how many times the difference between date in and reply date is <= 5 in a specific time period.
The start date is entered in say, “K1”
The end date is entered in say, “L1”
Also calculate difference in dates between 14 days and 21 days for time period
Also with reply in column “B” not sent until over 28 days. I have tried SUMPRODUCT with (date_in=K1)*(date_out<=L1) for the dates but unsure how to define <=5
I work at a call center and I get the data as Date, Time of calling and Duration of the call. Now since this is an overseas call center, even though the calls spills over 12midnight, the corresponding date shows as the date when the agent logged in.
So I get the data in this format, Date: 06/11/2012, Time: 19:00:00 - 04:00:00.
How do I calculate the time difference at one go without first getting the time difference from the time of login till midnight and then add that to the time difference of midnight till time of logout. I have attached a file for your review.
I'm calculating the difference in time:
9:54-9:45 = 0:09
Now to convert this in minutes (in number format), I multiply this number with 1440:
0:09*1440 = 9
When I click the cell this number is actually 9.0000005, rather than exact 9. I need it to be exact 9 since I have to match this number from other excel sheet.
To sum up:
This is what I expect:
31.99999 should be changed to 32
10.000001 should be changed to 10.
does anybody knows an idea how to get the time difference without getting the #NUM! error message?
Column A contains Start Time while Column B contains end time, if the time in column A is 11:45 PM and the time in column b is 12:15 AM, then I would get this error message...any idea how can i get the time difference without having to use the [hh]:mm format? i would like to use the hh:mm AM/PM format instead.
Given any two timestamps with the format
dd-mmm-yyyy hh:mm:ss AM/PM
How to calculate the total time difference in seconds.
For e.g. calculate the time difference in seconds for following
07-Nov-2009 00:00:01 AM
06-Nov-2009 11:59:59 PM
Answer should be 2.
I have a userform with a number of textboxes where the time is entered in the format like 00:00, (24 hour clock).
What I need is code to calculate the time in minutes / hours between 2 of these textboxes and for the result to be displayed automatically in the third textbox with no user input required, (other than to put in the start and end times).
The third textbox must display the result in the same format as above - here is the code I use to get the textbox to force the time in as above;
Code:
Private Sub TextBox3_Change()
Dim t As Date
'If they enter 4 digits and NO colon e.g. 1400
If Len(TextBox3.Value) = 4 Then
[Code] ......
A
B
C
1
Time 1
Time 2
Result
2
8:00
7:30
-0:30
Date OutTime OutDate InTime InTime Difference
01-03-099:0001-03-09NIL
02-03-09NIL02-03-09NIL
03-03-09NIL03-03-0910:002 day(s) 1 hours 00 mins
03-03-0911:1503-03-0918:000 day(s) 6 hours 45 mins
04-03-099:00NILNIL
05-03-09NILNILNIL
06-03-09NILNILNIL
07-03-09NIL07-03-0914:453 day(s) 5 hours 45 mi
In Column E in want the time difference to be calculated as shown above.
I have 2 cells with dd/mm/yy h:mm format. I have been using =TEXT(BQ3-BP3,"[h]:mm") to work out the hours and minutes difference between the 2 cells. However I would like the formula to work so that the hours and minutes difference will only come into effect after midnight on the first day. For example
01/01/06 23:30 - 01/01/06 23:45 would read 00:00
but
01/01/06 23:30 - 01/02/06 00:45 would read 00:45
I've got a spreadsheet of samples taken at certain time intervals for a period of 2.5 hours, they were collected in hh:mm:ss format. Most of them are approximately 5 minutes apart. What I'd like to do is convert the first time to 00:00:00 and then recalculate each sample from there. Is there an easy way to do this?
So, what looks like this right now:
8:45:00
8:45:36
8:50:36
8:55:36
9:00:36
Would look like this:
00:00:00
00:00:36
00:05:36
00:10:36
00:15:36
etc...
I'm trying to calculate the available man hours I have for my shift/team. I have got the basic formula to deduct the time, and lost time for breaks ok, but when the shift end time crosses midnight the formula returns a "value" error message. i.e. start time = 18:00. End time = 24:00 breaks = 15 mins gives me a formula like this =TEXT(O17-N17-P17,"h:mm") and a result of 5:45
How I can make this formula work so it can calculate the variance even though the shift ends at 02:00am the following morning?
I'm looking for a formula in relation to the calculation of time.What I'm looking for is a way of finding the difference between the time two cells and it displaying it in the number of hours e.g.:
Cell 1__Cell 2__Cell 3
12:00 + 18:30 = 6.5 (it is 6 hours 30 mins but I want it displayed as a number.
I am looking to calculate the time difference between 2 date time fields using a specific calendar.
I work in an engineering company and am having problems calculating machine utilization efficiencies.
Example:
Job 1: Start date 06/01/2009 10:00:00
Job 1: End date 06/02/2009 12:00:00
Calendar:
Dayshift: Monday - Thursday 07:15:00 - 16:15:00, Friday 07:15:00 - 12:15:00
Nightshift: Monday - Wednesday 21:00:00 - 07:45:00, Thursday 21:00:00 - 05:45:00
Using the specified calendar I am trying to calculate the time difference between the start and end date of job 1.
I am currently usins Excel 2007 and would like to calculate the diferrence in hours and minutes (ideally in decimal e.g 4:30 should be reflected as 4.5) between two date and time groups, excluding the non-working time between 17:00 and 09:00, weekends and holidays. An 8 hour working day is to be used. I have attached a spreadsheet were I tried to achieved the above with little success.
View 2 Replies View RelatedI have a userform for a time sheet i am working on. I used the following code to enter the time difference between time in and out.
Code:
'FIRST SET
v = (Me.TimeIn.Value)
w = (Me.TimeOut.Value)
x = Int(v / 100) + (((v / 100) - Int(v / 100)) / 0.6)
y = Int(w / 100) + (((w / 100) - Int(w / 100)) / 0.6)
[Code] ........
The code works fine, however, I have I need to place another time difference in based on from the sameuserform but different comboboxes. I thought it wouldbe easy just to add a second code.
Code:
v = (Me.TimeIn.Value)
w = (Me.TimeOut.Value)
x = Int(v / 100) + (((v / 100) - Int(v / 100)) / 0.6)
y = Int(w / 100) + (((w / 100) - Int(w / 100)) / 0.6)
[Code] ....
When i add the second code i get the runtime error 13. The worse part is that i was going to do this like five times.
I manage a team in a call centre and deal with lots of reports on excel.
I am dealing with a report on a daily basis that i need to use in order to calculate the total idle time that each of agents have. There are roughly 170 agents.
After I have formatted the cells to hh:mm:ss, the obvious thing to do would be : =(B1-A1)
Is there a way to write a macro (or anything) in order to reapply this to the report on a daily basis? Bearing in mind that this has to be done daily for 170 individual reports. They work a 8am - 5pm shift. So there is an entry every time they make a call.
Agent Name
Extension
Initiateddate
TerminatedDate
MSGR_nmasango
9363
28/02/2013 8:06:47 AM
28/02/2013 8:08:54 AM
[Code] ........
I have tried several ways to calculate the difference between 2 dates/Time fields. Here is what i have tried and the issues i am encountering.
Cell F3 Has the Create date and Cell G3 has the resolution date and i need to calculate the difference between the 2 in months, Days, Hours, Mins and seconds:
1st option - =G3-F3 and set the format of the cell to mm "m "dd"d" hh"h "mm"m "ss"s "
The problem is, for some reason the months isn't calculating correctly and appears to add 1 month
2nd option - =DATEDIF(F156,G156,"y")&"y "&DATEDIF(F156,G156,"ym")&"m
"&DATEDIF(F156,G156,"md")&"d "&TEXT(MOD(G156-F156,1),"hh""h ""mm""m ""ss""s""")
This appeared to work however because it looks at the date and time separately, when there are 22 hours difference which spans over 2 dates ( Created 13/06/2013 10:30:00 Resolved 14/06/2013 08:34:00) its shows as 1 day and 22 hours which isn't correct.