How To Get Average Time For Four Specific Entries
Apr 7, 2013
I have a database of over 10,000 entries. I am trying to get the average time for four specific entries (department, test 1, test 2, test 3). I did an averageifs for the tests individually and calculated the average time individually.
The three tests comprise of the department.
Average of test 1 = 40.8
Average of test 2 = 39.9
Average of test 3 = 94.8
Average of dept using the averageifs is 41.3
Average of dept by taking the average of the values above is 58.8
Why is that discrepancy there?
View 6 Replies
ADVERTISEMENT
Mar 16, 2009
I would like to create an average function that will take an average of the Column labeled "Gap Time (Hours/Min/Sec)". I only want it to take the average for this for each new start date. These values will change daily so I was hoping that someone may help me write a function that will work when data changes instead of manually taking the average every time data is entered.
View 5 Replies
View Related
Mar 3, 2007
I am working on a system where the system is having "australia time". Now, I want a worksheet where it should reflect the India Time after pressing a specific key in a specific cell.
View 3 Replies
View Related
Dec 22, 2005
I need to average the figures in several cells. However some cells have a 0
in them.
I therefore want the formula to ignore the cells which have a zero.
I have used the AVERAGE & AVERAGEA function, but both count 0 cells.
(although AVERAGEA ignores blank cells, I need to keep the 0s in as they are
linked to another formula)
View 9 Replies
View Related
Jun 4, 2014
Daily Result
14
10
16
10
5
15
8
12
15
9
I have the formula working for the average of the 4 lowest of all, using "AVERAGE" and "SMALL"; need for average of 4 lowest in most recent 7
View 6 Replies
View Related
Jul 22, 2014
I am trying to get the average of the last 6 data entries not including blanks or zeroes.
Currently I have:
{=AVERAGE(INDEX(C2:CP2,LARGE(IF(C2:CP2<>"",COLUMN(C2:CP2)-COLUMN(C2)+1),6)):CP2)}
Which works fine when I've got 6 or more values in the row.
But if there are less that 6 values in the row it returns with #NUM!. Is there a way to add an IF ERROR THEN make = to AVERAGE of C2:CP2?
View 3 Replies
View Related
May 2, 2014
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
View 5 Replies
View Related
Jul 5, 2006
I have a worksheet that has all weekday dates in column 1 and values in column 2. I want to create a 30-day moving average based on the last (non-zero) value in the column 2.
Since every month has a different amount of days, I want it to search the date that has the last value (since I don't get a chance to update it daily) and go back thirsty days from that date and give an average of all the column 2 values skipping and values that are null or zero.
View 13 Replies
View Related
Jun 11, 2014
I am having a little trouble with a spreadsheet I am creating, the formulas and cell formatting I should be using to enable this to work.
Here goes:
in cell E3 I have a time started (e.g 12:45 pm), In F3 i have time finished (e.g 2:30 pm)
So, what i'm wanting is the time taken in G3 and also, i have the amount of units that is entered manually in H3. I would like I3 to show the time taken per unit.
View 2 Replies
View Related
Aug 12, 2007
i type into any cell in row 1 i need the time at that moment to be captured and shown in cell "B". When i type into row 2, the time which i entered the data must be captured into row 2 cell "B".
View 5 Replies
View Related
Sep 18, 2013
I have this data set which has customers D.O.B's. This a test data set for the MGM Grand Casino and some customers are under aged below 21 or not even born yet (basically wrong inputs). So ultimately I want to retain the row entries of the customers who were born between (1930 - 1992).
mgm_cleaned TEST ABCDEFGHIJKLM43928-Sep-20048-Sep-200405.4722000004-Oct-194944969-Sep-20049-Sep-200408.5720.25000004-Oct-1949459320-Apr-200423-Apr-2004010.9255000004-Oct-1949469420-Apr-200420-Apr-200409.2941000004-Oct-1949479121-Apr-200421-Apr-2004019.637.25000004-Oct-1949489221-Apr-200421-Apr-2004016.2941000004-Oct-1949499323-Apr-200323-Apr-2003010.96-10.25000004-Oct-1949509623
[Code] .........
View 2 Replies
View Related
Mar 26, 2014
I got Excel for Mac 2011 installed. I have a table called 'Raw" that holds data from the beginning until the end of 2013 (in total ~7000 rows). I have columns for Category, Start and End time, and time period in Hours, Minutes, and Seconds:
Code:
A
B
C
D
E
F
Category
Start
End
Hours
Minutes
Seconds
Transportation
2013/01/01 01:00:00
2013/01/01 01:15:00
0:15:00
15:00
900
[Code] ...........
I'm trying to get an overview of how much time I've spent in January on Transportation. I would need to look at the Category entries for Transportation, then only use the ones which have the Start set to 2013/01, and then take the Hours/Minutes/Seconds, and summarise it in a new table called 'Data':
Code:
A
B
C
D
E
F
Month
Category
Occurrence
Hours
Minutes
Seconds
2013/01
Transportation
48
[Code] .......
I have figured out a way to count the occurrences for Transportation for January:
=COUNTIFS(Raw!B:B,">="&"2013/01/01 00:00:00"+0,Raw!B:B,"
View 1 Replies
View Related
Jan 31, 2013
I have a table which looks like this:
Name 1 IDNumber Name 2 Name 3 Column 5
Tom20148 John Malmo
Tom20148 Will Malmo
Bob20206 Will Malmo
Tom20206 Will Paris
Bob20206 Rob Rotterdam
Bob20207 John Rotterdam
Ray20207 John Paris
Tom20208 John Malmo
Ray20208 Rob London
Ray20209 Rob Paris
Bob20209 Will Malmo
Is it possible to have excel go through this list and assign each row a number in column 5 based on the names and the IDNumber? Basically, I would want each entry that is identical in name 1, 2 and 3 to be assigned numbers 1, 2, 3, 4, 5 etc based on their IDNumber. So Tom/John/Malmo with the IDNumber 20148 would get the number 1 in column 5, while the next match (Tom/John/Malmo/20208) would get the number 2 in column 5. For each different match of Name 1,2 and 3, I would want the count in column 5 to start at 1. So Bob/Will/Malmo/ 20206 would get number 1, Bob/Will/Malmo/20209 number 2 etc.
View 4 Replies
View Related
Jan 20, 2012
I have 13 sheets of data in my open workbook. Column D, which includes blank cells at times, across each of these sheets maps the same info. of orders. However, I know there are several duplicates, and I want to clean them out. I am trying to figure out a way to highlight all the duplicates that appear only in column D beginning with sheet 4 and ending with sheet 13. I will leave the duplicates that appear on Sheets 5-13 alone, but I want to have them highlighted, so I can review the ones that appear on sheet 4 first, and then delete them.
View 1 Replies
View Related
Feb 2, 2010
I am creating a log to keep track of my start and stop times when I work on a project. I have two columns labelled START and END and I can use a macro button to make the current date and time appear in the cell under these headings. What I haven't been able to find is a way of getting the macro to move to a new blank cell ready to accept the next entry. For instance, move one cell to the right or move one cell down and one to the left.
Can anyone tell me how to do this? (recording it just names the cell so it always goes back to that named cell.)
View 9 Replies
View Related
Jul 29, 2008
How would I go about displaying in a cell the time from the last entry to the current but show 0 time if the range is empty?
E5 to R6 currently has space for numbers to be entered.
E3 has the command =NOW()
I would like E7 to show "xxx minutes have passed since last entry" where xxx would show 0 while the range is empty.
View 9 Replies
View Related
Jan 13, 2014
How to perform this function on Google Spreadsheets (which appears to be slightly different to Excel);
Calculate the sum of the numbers in column D that occur on the 10th January 2014?
And also, Calculate the sum of the numbers in column D that occur between 9am and 10am on the 10th January 2014.
View 1 Replies
View Related
Jan 6, 2010
I use online banking for paying my monthly bills. I get different confirmartion for each pay transection. Pls look attached Excel file. Now I want to find specific bills expense with amount from all my 12 months bank statements. How can I get this task done.
Note: Each time get different confirmation which appears on my bank statement beside paid bill name. for example January 2009 statement GAS Z8A.... Feb 2009 GAS S2W. I hope this clarify. What I have to do if I want to get all my 12 months GAS money withdraw from bank statement. I use csv file for bank statement.
View 11 Replies
View Related
Nov 19, 2008
I am looking for a formula to change a condition based on the time of day. Essentially, before 1pm I would like the formula to be:
=((I12/100)*25)/D12
After 1pm I would like the formula to be
=((I12/100)*25)/B12
I tried various ways with "=if(now()> ..." formulas to no avail because of the way Excel handles Now().
View 6 Replies
View Related
Jun 3, 2014
Trying to write an if statement giving a simple value of 1 if a time is outside of weekday hours 8am to 9pm. Cell formatted as (6/3/17 2:15 PM). Function should report "0" value as this is a Tuesday between 8am and 9pm.
A cell formatted as (6/3/14 7:54 AM) should result in "0" value.
View 6 Replies
View Related
Oct 7, 2008
I have a bunch of data and I want to be able to count the number of entries that fall within each of the 24 hour increments in a 24 hour clock. (military time)
For 12:00:00 all times would be between and including 12:00:00 and 12:59:59
Column B | Count
------------------
12:00:00 344
13:00:00 44
14:00:00 5
View 6 Replies
View Related
Oct 11, 2008
Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
View 2 Replies
View Related
Nov 12, 2008
Many years ago I created a complicated spreadsheet that calculated employees's leave, sick, vacation etc. The timekeeper would indicate the amount(s) used for a particular day and it would automatically calcuate. The problem with this is that the time keepers do not use .25, .50, or .75 for the fractured time. Instead they used .15, .30 and .45. Previously, I used a convuluted if statement looking to the right of the leave to figure out what and how to calculate it and I'm trying to revamp it to make it more streamlined.
View 14 Replies
View Related
Jun 9, 2009
i have a slight problem i have this script which i want to run on all worksheets which are numbered (i.e. 1,2,3,4 etc) and to delete the rows in the F128 range which is under 00:05:00. I just cant figure it out to get it working.
View 2 Replies
View Related
Aug 17, 2007
I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000.
Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value.
I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
View 9 Replies
View Related
Jun 6, 2006
I need to generate a report that indicates how long it took a vendor to respond, and indicate if the time was less than 2 hours.
I'm having trouble with a formula that will indicate how long it took for the vendor to respond during business hours (8-5 monday through friday). I can easily calculate the total elapsed time, but I'm at a loss on how to account for the after hours time period.
Would this be better handled with VBA?
View 3 Replies
View Related
Aug 5, 2009
I'm trying to find an easy method of recording the available hours of operation for an airfield which can close a couple of times a day due to weather.
The attached sample explains it better.
View 5 Replies
View Related
Dec 4, 2009
I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows:
12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example:
09:57:145 and 08:12:055 would give a difference of 1:45:090
12:07:985 and 18:59:788 would give a difference of 6:51:803
To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
View 3 Replies
View Related
Oct 23, 2007
I have a column (D) where I put percentages complete of a task. When that reaches 100% I want to put the date in column (C).
I found many samples online but nothing I can modify to do this.. This one is pretty straight forward but I'm not sure how to have it look for the value and not just empty or not. I would be greatful for any help you can offer.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column <> 4 Then Exit Sub
If Target.Row = 1 Then Exit Sub
If IsEmpty(Target(1)) Then Exit Sub
If IsEmpty(Target.Offset(0, -1)) Then
Target.Offset(0, -1) = Date
Target.offset(0, -1).numberformat = "yyyy-mm-dd"
End If
End Sub
View 6 Replies
View Related
Jan 23, 2008
The 'gist' of what I need is for events scheduled (top of spreadsheet), no school can be placed into an event within 29 minutes (because one-half hour apart IS ok). The time increments are on the left side of the spreadsheet (rows). I'm trying to "automate" somehow so that if we try to plug a school into an event too soon from their last event, the spreadsheet won't allow it.
View 2 Replies
View Related
