Track Crew Members Daily Time
Apr 29, 2009I am trying to make a workbook to track crew members daily time.
I would like to be able to track time by Tag # and by W/O # for daily hour totals.
ADVERTISEMENT
Make Sheet To Track Daily Changes
Jan 13, 2014I am making a sheet to track the daily cycles of a machine. I need to get the information from the "meter reading" column to populate in the " cycles recorded" cell. I'm very new to this and need a formula to use to track the changes in column D on the attached sheet that will populate changes in cell D4.
Cycles counts.xlsx
Track / Calculate Overtime Hours - Daily Basis?
Sep 14, 2006I'm creating an log to track the total number of hours an employee works in one day and calculate regular and overtime hours worked based on the following criteria: overtime will be >8 hours in one day and >40 hours in one week.
Right now I have it 'mostly' figured out, but under certain conditions, it calculates more than 8 hours in one day for straight time. Is there a way to set a maximum value for the straight time cell and have the difference be added to the overtime cell?
Building Sheet To Track Delivery Times Of Wagons On Daily Basis?
Mar 23, 2013I am trying to build a sheet to track deliveries into the company I work for.
We book loads to come in at set times for production, I am wanting a sheet which I can enter the due time and the actual time of the the different companies and then produce a report in graph format to see which are the worst at late or early deliveries.
Enter Total Time And Subtracting From Daily Time
Apr 9, 2012Any way to enter in a total amount of time and then subtract it from a time shown. So for example:
I want to enter in a time of 26 hours, 10 minutes and 2 seconds: 72:10:02
I cannot find a format that allows me to enter the hours in excess of 24
Then I want to subtract it from a time of the day which will be entered as AM/PM: 02:40:02 AM
Then I want to show the result as a time of day: 00:30:00 AM
Lastly, I want to also show the amount of days adjustment: -1d, 00:03:00 AM
How this can be done through cell formulas?
Track The Time From 1-NY To 10-Lukket
Jul 2, 2009
So if we take first line the defect id is 10. The date entered is 21-08-2007 and the status is 1-NY ( means new)
NExt line the defect ID is still 10 the date is changed to 22-08-2007 and the previous status is was 1-Ny and the new status is 03- under vurdering (to be
evalueted)
Third line the defect ID is still 10. The date is changed to 04-01-2008. The previous status was 03- Under vurdering ( to be evalueted). The new status is 10-lukket.
I want to be able to track the time from 1-NY to 10-Lukket.
Now the even more tricky part. As you can see other defects go over different statuses e.g defect number 1000 here.
The sheet I have is 13000 rows and I have a total of 2300 defects
1021-08-2007 10:491-Ny
1022-08-2007 15:381-Ny03- Under vurdering
1004-01-2008 13:4703- Under vurdering10-Lukket
10029-08-2007 10:051-Ny
10003-09-2007 14:121-Ny04- Afventer tilretning
10012-09-2007 15:2204- Afventer tilretning10-Lukket
100006-02-2008 11:2901-Ny
100012-02-2008 15:0501-Ny04- Afventer tilretning
100015-08-2008 08:5304- Afventer tilretning10-Lukket
100015-08-2008 22:1310-Lukket04- Afventer tilretning
100004-02-2009 14:0404- Afventer tilretning10-Lukket
How To Create Log To Track Time To Second Column
Dec 20, 2013Time. What formula do I use?
6:30AfterBreakfast
7:30AfterBreakfast
8:00AfterBreakfast
8:30AfterBreakfast
9:00AfterBreakfast
9:30AfterBreakfast
10:00Before Lunch
11:00Before Lunch
12:00Before Lunch
13:00Before Lunch
14:00Before Lunch
14:30After Lunch
14:45After Lunch
15:00After Lunch
16:00After Lunch
17:00After Lunch
18:00After Lunch
18:30After Dinner
18:45After Dinner
19:00After Dinner
19:30After Dinner
A Formula To Track Breaks In Time
Mar 7, 2014I need a formula that places a "T" next to values where the current cells time is greater than 15 minutes than the previous cells time. The times start in column D3 and I want the formulas to start in column E3.
Example
11:45
12:00
12:30X
12:45
13:00
13:15
13:30
14:00X
[code]......
Track Number Of Occurrences During Particular Time Range?
Jun 15, 2014I have a data with phone number, date and time.I want to track how many number of calls came on a particular date and during a particular time. formula which would work in excel and track the same.
View 2 Replies View RelatedCalculating Time To Track Work Hours
Jul 24, 2009I can't figure out how to do a proper formula for calculating time. For instance I have one column that says "Time In", the next is "Time Out" and the other is "Lunch Time". My calculation needs to be this:
Find the total hours between the Time In and Time Out and then Minus the lunch time to get total hours worked for the day. The only way I can get this to work is using 24 Hour time format. Is there another way?
Track Time Spent Active In Workbook?
Aug 26, 2013My team and I are attempting to track how much time we are spending in each Excel workbook we create (all workbooks are created from a single template). The problem is that we are often jumping back and forth between different workbooks throughout the day so manual entry methods are neither accurate or practical. Is there a way, with macros or formulas, to embed a time tracker in the template workbook that would only record active (when workbook is selected) time in the workbook?
View 3 Replies View RelatedTrack Date And Time A File Is Opened
Aug 5, 2007I found some vba codes in this forum which record the date and time in column A when a file is opened.
Can the codes be modified such that when someone opens the file the second time on the same day, the date and time are recorded in column B?
Attached file for your reference.
Track Computer Lock And Unlock Time In Excel?
Jun 26, 2014I want to make break tracker. When i press Windows + L Or CTRL + ALT + DELETE (Lock computer) Automatically lock time upload in my excel sheet. Then when i unlock pc then automatically unlock time will upload in my excel sheet.
View 1 Replies View RelatedCalculate The Daily Average Of Rainfall At A Time?
Feb 16, 2014I have a set of 7 years daily rainfall data. I need to calculate the daily average of rainfall from this 7 years data set. I don't wanted to calculate it by for example copying and pasting the first day rainfall of each year rainfall to a new sheet and average it for all the days. I need to calculate it all at a time.
View 1 Replies View RelatedEmployee Schedule Lookup Time Value And Return Name For Daily Tasks
Oct 10, 2013I'm trying to auto input names from my schedule into dailytasks for my servers. Sometimes the amount of servers on a specific day changes(i.e Mondays 3 to 5 servers and Friday - Sunday there is 4-6 servers on) and times could change also as of now it works with
=VLOOKUP("6:00",AC$25:AJ$46,8,FALSE)
Not sure how to set up lookup value and return the name
Macro Automatic Printout Worksheets Daily At A Specific Time
Feb 2, 2007Need Macro to automatically printout my worksheets daily at a specifi time?
View 9 Replies View RelatedAuto Copying Cells Value That Changes Daily Without Affecting Daily Value?
Mar 20, 2014I have the following scenario:
Cell A1 shows a specific value (pivot table value), but same A1 cell value might change if pivot table is refreshed.
So I am trying to automatically copy A1 value to another cell but I need to keep track of each value when pivot table is refreshed.
I have been researching about =Value formula, but it does not work properly since A1 cell reference will change each time pivot table is refreshed.
Keeping Track Of Data Over Time Even If The Data Is No Longer Visible?
May 20, 2013I work in a medical facility, and I need to track data I've entered representing patient visits indefinitely over time. I've attached a weekly grid to this thread that I use to record which patients have had visits during the course of the week. It sums their total visits on the right. I need to continually track these because every patient gets an insurance-mandated progress update after 10 visits. Unfortunately, they don't always show up, and the most I can possibly keep track of is two weeks, max, and most patients only get two visits per week. Is there a way to dump these sums into another column indefinitely?
View 1 Replies View RelatedHow To Make List Of Members By Date
Apr 11, 2014I have a worksheet with Names in Column A. Date when the person joined in Column B.
On a separate worksheet I want to sort members by the months and year they joined by having all the months in Columns.
Assigning Listbox Members To Variable
Jul 3, 2009I would like to assign listbox members to a public variable (quite the opposite of what you normally do). I receive the error message "type mismatch".
Public MemberLB as Variant
Public Sub ListBoxTest()
n = ListBox_target.ListCount
For iCnt = 1 To n
MemberLB(iCnt) = ListBox_target.List(iCnt - 1)
Next iCnt
End Sub
Divide The Output By The Number Of Members Used In The Calculation?
Apr 10, 2014I have a sumproduct formula, I am trying to divide the output by the number of members used in the calculation:
This is my data set
4/10/2014102.6214/10/201499.5144/8/2014106.144/8/2014105.4
4/9/2014102.3284/9/201499.3864/2/2014105.8734/7/2014103.6
4/8/2014102.0884/8/201498.7953/17/2014105.5864/3/2014103.95
my sumproduct function is adding up all items that fall on that date which is fine, but i would love to calculate an average so divide by the number of items that were used in the calculation, is that possible?
=SUMPRODUCT(--(A1:G9=A11),(B1:H9))
Combinations Of Subtraction Between Members Of Same Subgroup In Several Groups
Apr 27, 2014I have a data that looks like:
1
a
data_1a
1
b
data_1b
1
c
data_1c
[code].....
Is there a way to automatically make all possible combinations of deduction between members of group 1 only then of group 2 only etc? So it would look like:
data_1a-data_1b
data_1a-data_1c
data_1b-data_1c
data_2a-data_2b
data_2a-data_2c
data_2b-data_2c
Combinations between letter indicators but not between number indicators. BTW groups are different in size starting from 2 till 8 members.
Activate VBA Auto List Members Or Intellisense
Mar 13, 2009How do I activate the little box in VBA that appears after e.g. '.' (which enables me more quickly to see if I'm writing the correct code)?
View 3 Replies View RelatedCustom Function With Auto List Members
Apr 27, 2007I have created a UDF which determines what the name of the day is.
Public Function Dagnaam(daydate As Date, Optional Language As String = "Dutch")
weeknl = Array("Maandag", "Dinsdag", "Woensdag", "Donderdag", "Vrijdag", "Zaterdag", "Zondag")
weeken = Array("Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday", "Sunday")
dayno = Application.WorksheetFunction.Weekday(daydate, 2) - 1
Select Case Language
Case "Dutch"
Dagnaam = weeknl(dayno)
Case "English"
Dagnaam = weeken(dayno)
End Select
End Function
What i would like is when the user uses this function in the worksheet the field Language holds a dropdown list with predefined languages.
Send Mail Through Outlook To Team Members For Their Pending Trainings?
Jan 5, 2014I am using an excel where I want to send mail to my team members for their trainings pendings,
Few trainings are once in a year and few traings are monthly.
Reference Function: Pickup Groups And Members Of Each Group From A Phone System
May 6, 2009I have the following worksheet, which lists the pickup groups and members of each group from a phone system. Another worksheet lists all the exts and I want to have some sort of VLOOKUP, MATCH function that will look at the ext number and come back with the pickup group number.
I've attached a copy of the spreadsheet to show you what I'm talking about. So looking at the spreadsheet if I have an ext number of 8001 I want to return the value of 2 as ext 8001 is a member of pickup group 2. Also of an ext is not a member of any group, then I want to return nothing.
Counting And Lookups (count The Number Of Team Members Listed Under That Supervisor)
Feb 22, 2010I have roster that has 12 teams on it, each team has their own column with the supervisors name in the first row. I want to look up the supervisor and count the number of team members listed under that supervisor.
View 4 Replies View RelatedExcel 2007 :: Add Calculated Members In Pivot Table From SSAS OLAP Cube
Nov 4, 2012I use Excel to query a SSAS OLAP Cube, the return of which I then model into various outputs. I do not have access to amend the cube.
I am hoping it is possible to be able to add custom calculated members to some dimensions in excel rather than on the server, but I'm struggling to find any resources that explains how it is done or if it is even possible. For example, the cube will return the dimension 'Source Country' with members 'England', 'Northern Ireland', 'Scotland', 'Wales', I would like to add a calculated member 'United Kingdom' to consolidate all those members.
Is this possible or should I just look to calculate this consolidation by formulas in the model.
Excel 2007
Win7 Pro
Picking Column A Values Based On Differences Between Members In Column C?
Jan 8, 2014I have data like this,
Member
chr
location
web
1
50000
[Code]....
Now i want to select member column values based on the differences in values between members of location column should be 50000, it means if select web then my next selection should be SEB because next value (i.e web + 50000) is 100000 and it is matching to SEB in members column.
expected results
web
1
50000
[Code]....
Track Changes
Oct 21, 2009So I got this code from http://www.ozgrid.com/VBA/track-changes.htm i followed the directions and pasted it in the workbook module but does not seem to be working. I am thinkning the copy and paste feature is messing something up anyone know what?
I have added a worksheet named Log