I need a formula that places a "T" next to values where the current cells time is greater than 15 minutes than the previous cells time. The times start in column D3 and I want the formulas to start in column E3.
Example
11:45
12:00
12:30X
12:45
13:00
13:15
13:30
14:00X
[code]......
So if we take first line the defect id is 10. The date entered is 21-08-2007 and the status is 1-NY ( means new)
NExt line the defect ID is still 10 the date is changed to 22-08-2007 and the previous status is was 1-Ny and the new status is 03- under vurdering (to be
evalueted)
Third line the defect ID is still 10. The date is changed to 04-01-2008. The previous status was 03- Under vurdering ( to be evalueted). The new status is 10-lukket.
I want to be able to track the time from 1-NY to 10-Lukket.
Now the even more tricky part. As you can see other defects go over different statuses e.g defect number 1000 here.
The sheet I have is 13000 rows and I have a total of 2300 defects
1021-08-2007 10:491-Ny
1022-08-2007 15:381-Ny03- Under vurdering
1004-01-2008 13:4703- Under vurdering10-Lukket
10029-08-2007 10:051-Ny
10003-09-2007 14:121-Ny04- Afventer tilretning
10012-09-2007 15:2204- Afventer tilretning10-Lukket
100006-02-2008 11:2901-Ny
100012-02-2008 15:0501-Ny04- Afventer tilretning
100015-08-2008 08:5304- Afventer tilretning10-Lukket
100015-08-2008 22:1310-Lukket04- Afventer tilretning
100004-02-2009 14:0404- Afventer tilretning10-Lukket
I have a start time and a stop time, then a difference is calculated in cell L53. I want to subtract the time value of a break but it only works if the entered value is greater than 1:00. I tried K2-I2-L55 and It works but It wont work for times less than 1:00. I need to be able to subtract :15, :30 or any other value in cell L53.
View 4 Replies View RelatedTime. What formula do I use?
6:30AfterBreakfast
7:30AfterBreakfast
8:00AfterBreakfast
8:30AfterBreakfast
9:00AfterBreakfast
9:30AfterBreakfast
10:00Before Lunch
11:00Before Lunch
12:00Before Lunch
13:00Before Lunch
14:00Before Lunch
14:30After Lunch
14:45After Lunch
15:00After Lunch
16:00After Lunch
17:00After Lunch
18:00After Lunch
18:30After Dinner
18:45After Dinner
19:00After Dinner
19:30After Dinner
I am trying to get the start time and finish time for breaks.
I have 4 columns Name, status, start, finish. In the name column there are multiple names, under status there 6 different status's. and under the time columns there are in and out times dependant on status. I am trying to us index match match. I have tried vlookup and hlookup as a nested function. I keep getting errors.
NameStatus MessageStart TimeFinish Time
Cameron WilliamsTech All & Billing12:31:4812:31:52
=index(starttime,match(name,namefield(match,"on lunch",starttime)))
[Code]......
I have a data with phone number, date and time.I want to track how many number of calls came on a particular date and during a particular time. formula which would work in excel and track the same.
View 2 Replies View RelatedI can't figure out how to do a proper formula for calculating time. For instance I have one column that says "Time In", the next is "Time Out" and the other is "Lunch Time". My calculation needs to be this:
Find the total hours between the Time In and Time Out and then Minus the lunch time to get total hours worked for the day. The only way I can get this to work is using 24 Hour time format. Is there another way?
My team and I are attempting to track how much time we are spending in each Excel workbook we create (all workbooks are created from a single template). The problem is that we are often jumping back and forth between different workbooks throughout the day so manual entry methods are neither accurate or practical. Is there a way, with macros or formulas, to embed a time tracker in the template workbook that would only record active (when workbook is selected) time in the workbook?
View 3 Replies View RelatedI am trying to make a workbook to track crew members daily time.
I would like to be able to track time by Tag # and by W/O # for daily hour totals.
I found some vba codes in this forum which record the date and time in column A when a file is opened.
Can the codes be modified such that when someone opens the file the second time on the same day, the date and time are recorded in column B?
Attached file for your reference.
I want to make break tracker. When i press Windows + L Or CTRL + ALT + DELETE (Lock computer) Automatically lock time upload in my excel sheet. Then when i unlock pc then automatically unlock time will upload in my excel sheet.
View 1 Replies View Related I am trying to add a number to a cell for work breaks. Below is what I am trying to do:
If F3 is < 4 then 0
If F3 is > 4 but < 6 then .25
If F3 is < 6 then .50
I have text with line breaks in a cell for example:
A1 =
Multiple
App1
App2
App3
App4
App5
When I reference this cell for example in B1 (=A1) the line break list merges together and adds a square (LBC) where the line break is meant to be as follows:
Multiple LBC App1 LBC App2 LBC App3 LBC
Is there a formula that can look at cell A1 and split the lines out so that both A1 and B1 look identical not merged together?
Sheet A1= Sheet!B1, Sheet!B1 data keep on changing - I want to track Sheet A1 data in the same sheet with time stamp and column wise.
View 5 Replies View RelatedI need a formula that will return number of aged breaks under each criteria in sheet 1 row 1 and each team based on the unique case number, so for example in sheet 2 I have my raw data starting in A1, i should get the below results in sheet1 ...
View 9 Replies View RelatedI currently have numerous workbooks with linked cells to a master workbook, but the linked cells dont appear to carry over or retain the formating from the master workbook (e.g. font style, bold, underlined, font color, cell color). I make changes quite often to the master workbook and would like the changes carried over to the other workbooks. Does anyone have a script where it would automatically carry over the font formatting? I hope this is understandable.
View 4 Replies View RelatedI am using Excel 2003. Looking for a way to find out whether some data I want to delete in a sheet is used by a formula somewhere else within the file. Is there a way to check that? In other words, I have the number 500 in A1, and I want to delete it, but I don't know whether it will impact a calculation on another sheet that involves that value in A1.
View 4 Replies View RelatedI work in a medical facility, and I need to track data I've entered representing patient visits indefinitely over time. I've attached a weekly grid to this thread that I use to record which patients have had visits during the course of the week. It sums their total visits on the right. I need to continually track these because every patient gets an insurance-mandated progress update after 10 visits. Unfortunately, they don't always show up, and the most I can possibly keep track of is two weeks, max, and most patients only get two visits per week. Is there a way to dump these sums into another column indefinitely?
View 1 Replies View RelatedI have the following formula which returns the number of asset breaks for each head of dept in sheet3 based on their teams in Sheet1 and then does a countif in >30_DAYS_ASSET in sheet2. In sheet 1 is a mapping table with range names "Teams2", "Teams" & "Managers". I now need the formula to also do a count on the unique numbers in sheet2 Column B, if there are duplicate numbers then that will be 1 asset break, so for example for for Joe plummer we can see there are duplicate case numbers so the formula in total should return 2.
=SUMPRODUCT(--ISNUMBER(MATCH(Teams2,INDEX(Teams,MATCH(C11,Managers,0),0),0)),
COUNTIF('>30_DAYS_ASSET'!$B:$B,Teams2))
Sheet1
AB2ManagersTeams3JOE BLOGGSAMP14JOE PLUMMEREQADMIN567Teams28SECADMIN9AMP1
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
Sheet3
AB4Head of DeptASSETS5JOE BLOGGS286JOE PLUMMER3
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
Sheet2
AB6SourceCase No.7SECADMIN4498618SECADMIN4498619SECADMIN44991310AMP144986211AMP144918012AMP1550935
Excel tables to the web >> http://www.excel-jeanie-html.de/index.php?f=1" target="_blank"> Excel Jeanie HTML 4
I need to remove all existing page breaks in a document and add a page break every 72 rows. I've tried some similar codes from this forum with other functions that I don't need in it.
View 7 Replies View RelatedFormula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies View RelatedI have a problem here:
Eg.
A B C D E F G H I
1 8 pm 9 pm 10 pm 11 pm 12 am 1 am 2 am
2 8 pm 11 pm
3 8 pm 2 am
I typed a formula : =if(and(c$1>=$a2,d$1
when i input the arrival time of A Car, the time he arrives late appears in column D it should read 15 Minutes. how i can get this time to appear automatic after i have registered the arrival time. A Car due at 19:00 arrived at 19:15. 15minutes late. I would be grateful if you could lead me in the right direction.............
View 3 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
d9 is where i enter my start time from a drop down menu and
d10 is where i enter my finish time
what i would like to do is have a formula to work out my total hours work then minu 45min and tell me whats is remainig which is over time
example
i start work and 06:00 and finish work at 15:00 which is 9hours i then remove my 45min break which then give me 1/4hour (0.25 of an hour) as over time
the 0.25 is then timesed by a figure of say 13.4481 which would then tell me that i have earnt 3.362025
and so on eg if i have 0.5hour it would tell me what that work out as.
I need formula (not VB) that will add time (0:30 minutes to each working shift) when these times are exceeded:
11:00
+0:30
19:00
+1:00
35:00
+0:30
[Code] .........
I am trying to create a graph of my data at the end of each month. The graph will show a count of the number of instances of each category in the data.
For example:
A1 =TODAY()B1 =MONTH(A1)
Column A from A3 down = 1,2,3,4,W,H,L
Column I between I2 and I140 = multiple instances of 1,2,3,4,W,H,L
July
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A3)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A4)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A5)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A6)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A7)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A8)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A9)),"0")
=IF($B$1=7,(COUNTIF($I$2:$I$140,$A10)),"0")
My problem is that when it comes around to August or the next month, I want the final count of July to be fixed/frozen so it won't change from the 1st of the month. I can then use the July column's data for my graph.
Can a formula convert itself into a value or freeze itself after certain criteria has been fulfilled?
I want some code which will automatically insert a page break every time the data changes in a column. In column B- the data is structured as below;
DOG
<blank cell>
<blank cell>
DOG
<blank cell>
DOG
<blank cell>
<blank cell>
CAT
<blank cell>
CAT
<blank cell>
MOUSE
<blank cell>
MOUSE
MOUSE
<blank cell>
Etc
The code I want would insert the page break every time every time the data changed- but not where there is a blank cell. I hope this makes sense. I realise the blank cells complicate things- the blank cells separating the data cells are there because there is additional;data in columns C,D,E etc
I have a worksheet with 760 names on it. The first row are headers, 2nd row on is the data. I need to break the data up into 25 rows a piece, excluding the headers. I am making rosters, so each roster would have twenty five names per sheet. Of course I know I will have a couple of names left over, but this would help with the bulk.
View 3 Replies View RelatedSo I got this code from http://www.ozgrid.com/VBA/track-changes.htm i followed the directions and pasted it in the workbook module but does not seem to be working. I am thinkning the copy and paste feature is messing something up anyone know what?
I have added a worksheet named Log
