Update Mastersheet From 5 Worksheets
Mar 27, 2007
I am trying to write a Macro so that my Mastersheet has a command button, that when clicked, will update itself with information from 5 other worksheets. I only need it to update new data and not data that is already there and i need it to copy it into the mastersheet in the next available blank row.
I am working with a mastersheet created by someone else and I have created the 5 worksheets. All the columns are exactly the same in both the worksheets and mastersheet. The mastersheet has 2 sheets, the front sheet ("Front Page") has the command button and the second sheet ("Activity Log") is where i want the new data to appear. I have very little knowledge of VBA, I have recorded a few macros and have used that to create the code i need to open a closed worksheet but I dont know where to go from there.
View 2 Replies
ADVERTISEMENT
Aug 12, 2008
I have a Master list of kids names and age groups, that will be used by Coaches to update, from this i would like to have each of the different age groups details extracted into different worksheets within the same workbook.
I used an IF statement to but found it was leaving blank lines between finds.
View 14 Replies
View Related
Sep 22, 2009
I'm trying to synthesize a fair amount of averages response time data from about 300 separate worksheets into one master sheet and I'm wondering what the best way is to do it using Excel's macros.
In each subject condition-worksheet there are 24 cell items that need to be pulled and put into the master worksheet; there are 2 conditions, for a total of 48 line items.
In each subject file, the subject number is in cell A1, my first desired average is in M7, then M15, M23, M31, M39, M47, M55, M63, then it repeats back to M9, M17, M25, etc..
How can I create a macro that creates a new line for each subject (starting with row 2) first with their subject number (A1 in all subject files), then M7, M15, M23, M31, M39, etc. moving across the row?
View 9 Replies
View Related
Sep 20, 2013
I am trying to pull data from multiple textboxes on multiple worksheets and compile it into a list on a mastersheet. I have searched multiple forums and I have been unable to piece together anything. I have attached an example workbook of the data that I am trying to compile. I am trying to pull the data for the textbox next to NAME, SS#, and SCHED. I have tried recording a macro for 1 sheet and then modifying the macro to work for on all worksheets but failed miserably.
View 1 Replies
View Related
Apr 1, 2012
I have two spreadsheets which carry the same information in three cells. Instead of just placing a link, =B2 etc., I would like to have the cells linked to each other through code.
For the one sheet I can use this with no problem, but as soon as I place this worksheet change event in the other sheet but reverse the cells references Excel gets unhappy.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
Set rng = Target.Parent.Range("B2, M2, N2")
[Code]....
Any proper way to update a cell no matter which spreadsheet the change takes place?
Sheet1 >> change is made to cell B2 and that same value is applied to Sheet cell C4.
View 3 Replies
View Related
Apr 23, 2012
I have faced a need to update several worksheets with the same format at once, like with copy paper, when i enter data in the first worksheet.
I have pre made worksheets that are identical by format.
There are probably many way to achieve what i want, but i need to find the easiest, less memory consuming method to do it.
View 4 Replies
View Related
Jun 19, 2009
I have a large amount of worksheets that require a formula update. Update itself is simple. Each formula in the cell has to be devided by different cell. My problem is that I have a big number of worksheets to do this in and they are in different workbooks. Is there a faster way of doing it besides manually updating each cell?
View 9 Replies
View Related
Jun 7, 2008
We have a tariff table with the following data per row: Area code - Destination name - Price - and some other stuff that is not important. Once or twice a month we receive updates on Price for some destinations and maybe even some new rows with area codes and destination names that we do not have in our table. Can someone help me with a macro that will look into two sheets and do 2 operations:
1) taking as reference the Sheet2 - Column C (Price Tag) will update column C in Sheet1, using the Area Code (Column A) of both sheets as identifier to find to what row will apply the change;
2) if there is a new Area Code - Destination - etc. row that is not present in sheet1, will add it to sheet1
It does not matter to me if will update directly sheet1 or it will write the entire sheet1 content with the updates to Sheet3.
I am attaching a small example of of the sheets.
View 5 Replies
View Related
Aug 4, 2009
I have a workbook with a main worksheet where all the data entry and calculations are made and then I have "sub" worksheets which mirror subsets (specific columns) of the information from the main worksheet. When information in the main worksheet changes, or rows/columns are added, I want the sub worksheets to update automatically.
The only way I can figure out to do this is to use absolute references in the sub worksheets. Does anyone know how to change the references to be absolute (using the F4 function) without having to do them one by one? Or can anyone suggest how I can achieve this in another way.
View 3 Replies
View Related
Jul 30, 2014
I have a userform I attached here with 3 combo boxes where a user can pick districts and schools, etc. When they click ok, the various tabs in this macro enabled workbook will "refresh" with the metrics for that entity)combination of picks from form) across the board. Each tab will have multiple pivot charts/tables so the filters will need to be addressed. I've been looking for code to kind of match this scenario. I've seen some that kind of in the ballpark, but due to the size and complexity, I suspect this will be extensive, right?
Parameter Selection.jpg
View 1 Replies
View Related
Jun 17, 2008
I would like a macro that can match column A & column B data of Worksheet(WeeklyJob) to column A & column B of Worksheet(Master) then if match is found copy column C through column F into Worksheet(Master) column C through F (and overwrite any [outdated] existing data there may be in those columns [thus updating the job's weekly charges, etc.]).
If match is not found I would like it to copy entire row from Worksheet(WeeklyJobs) into first blank row at end of Worksheet(Master) (thus giving me a new record of a new job from the weekly report).
All the columns in both worksheets are labeled the same (& row 1 is headings).
View 9 Replies
View Related
Feb 12, 2007
I have a workbook with 6 worksheets inside; One of the sheets is a master list; it's simply the other 5 sheets compiled into 1 big one. I need to set it up so that any new data entered into the 5 separate department sheets is automatically entered onto the master sheet, in the first blank row.
The columns are the same across all the sheets. Hopefully this will be easier for the pros here than it's been for me, I've been banging my head against the wall on this one. I'll be checking this thread religiously, so if you need any more information just let me know...
View 5 Replies
View Related
Dec 9, 2007
On Event open workbook (wookbook A)
For worksheets 3 though to worksheet 9 and only columns D, E, F, G, H , I and J, and only rows 4 through to 35 auto update from a source workbook
Note 1: - as you will see in Wookbook A in the attached demo test zip file that row range 4 to 35 varies on each worksheet as the number of towns columns varies on each worksheet. So on one worksheet it might be row 4 to row 12 requiring update whereas on another worksheet it could be row 4 to up to row 35.
Note2: –the source workbook is a closed /non active workbook on another server in my network –path is X/sourcefiles/weeklydate/countfile.xls. In the source workbook the source is sheet 1.
Only update when there is a match of string of the place location name which are ALL listed in column C of the source worksheet –matched to that of string place location names in workbook A in their respective worksheets 3 through to worksheet 9. Then when there is a match – copy the content of the cells that correspond to the place location names in the source workbook (countfile.xls) from the columns D, E, F, G, H, I, and J.
Note 3. The way in which the source countfile works is that each week it will be updated with values/figures starting with column D in week 1 and column E in week 2 and column F in the third week and so on…..In the first week only column D will have values/ figures and the other columns will be empty – and second week only columns D and E will have values/figures – to make the code easy it would be OK to copy across the other columns when they are empty – thus leaving the other columns in workbookA also empty. So in week two when workbook A is opened and is updated from the source file with values/figures for workbook A’s columns D and E of worksheets 3 through to 9 the other columns F, G H, I and J on those worksheets would have only be empty cells or just not updated at all –as the source file at that time would have had only two weeks of figures entered.
Also copy across the column headings in row 4 for columns D, E, F, G, H, I , and J as those headings may change as they are dates.
The final bit that is important part of this is that as worksheet A is updated the formula in column K it will need to auto update as well as it is the initial figures in column D minus the figures in the most recent column updated – so if column G is updated today the formula needs to be =D5 – G5 and =D6-G6 and so on whereas when updated next week the formula would need to change to =D5 – H5 and =C6-H6 and so on.
View 3 Replies
View Related
Apr 23, 2014
I need to create a page (call it a dashboard) in excel whereby drop down fields (doesn't have to be drop downs, just how I imagine it to work at the moment), are used to refer to information in another worksheet, which updates several charts on the dashboard.
So, for example, I have several additonal tabs in the spreadsheet called 'Company 1', 'Company 2' etc, which in each tab contains information (monthly results) in exactly the same layout and format. However, on the front page, I would like to be able to select 'Company 1' (or 'Company 4') and then sub-select 'March 2014' results within that, referring to the data in the 'Company 1' tab. If possible, it would be handy to have this information displaying in a grid on the dashboard, which updates when you change between months and/or company. This could be the source data for the chart.
View 1 Replies
View Related
Aug 3, 2006
I have the following code that should open all EXCEL workbooks in a
specified path, and unprotoect any password-protected worksheets to allow
for Link Updates, then close the workbook after password protecting it.
sub UpdateAllLinks()
Dim vLinkSources
Dim iLinkSource As Integer
Dim AnySheet As Worksheet
sPath = " C:Documents and SettingsShaneMy DocumentsHarcourt
Assessmentspassword"
sName = Dir(sPath & "*.xls")
do while sName <> ""...............
View 9 Replies
View Related
Jul 19, 2012
I have a Database and every entry in the database has its own corresponding sheet with the data in a more viewer-friendly format. I want to assign a macro to a button to loop through all the sheets, copy the cells and paste to the database (to update the database).
Also, nothing prevents the user from deleting the sheets or mixing them. So is there a way to take the reference number from the database in column B, search for the corresponding sheet which has the reference number in cell B3 and then update it accordingly.
Code:
Sub Button19_Click()
Dim WS_Count As Integer
Dim I As Integer
[Code]...
View 1 Replies
View Related
Apr 20, 2009
I have a weekly report which lists items and their available date. This list is always changing - new items added, old items removed. These items are required for 4 different projects and the item listed says which project the item date is for. There is also the same item across different projects which also have different dates which also appear and disappear each week depending on requirements.
I want to be able to capture the date for each of the items per project per week. Ultimately, I want to be able to track the movement of the date per item per project. I have attached a sample of how I want it to do.
View 5 Replies
View Related
Dec 19, 2012
consolidating data from 3 worksheets which contain same data fields but each representing 1 brand. I like to have a summary/mastersheet to contain data from all 3 worksheets and then when the data in each worksheet is added or updated, the summary worksheet should reflect the changes (adding new data to the last row).
Project Submissions.xlsx
View 2 Replies
View Related
Oct 8, 2007
How to Update the Worksheets field value based on updates done in Main Worksheet.
As i have two different worksheets (Which can be even more then 5) and i want to update the Column Field value of "State" in work sheet "B" & "C" based on the updates done in "State" Column Field value in Worksheet A.
I just want to update the "State" Column Field value in Worksheet "A" and it should update the "State" Column Field value in Worksheet "B" & "C". Only the criteria to match is Number. Based on number i want to search the values in Worksheet "B" & "C" and want that these values also get updated.
View 9 Replies
View Related
Apr 1, 2014
I have a master sheet and 102 'advisor named sheets'. The master sheet is updated daily with information (number and text) along 1 row in different columns (A:W). I would like when the advisors name is typed (W) =joebloggs! for this whole row to be auto input on joebloggs sheet. There can be multiple of these entered daily for same person, so the information would need to populate on the next row so not to type over the previous entry.
View 3 Replies
View Related
Jan 30, 2014
I am trying to create a "Master Sheet" where I enter in the column data and after I have entered my data for each row, I can select the button which toggles the macro to run. I have it built to build new sheets as new clients are obtained. My problem is after I have a sheet that has client's data I cannot get new data to add itself below the data that is already there. I want each client's sheet to keep adding rows as more data comes in. My current macro is :
[Code] .....
Attached File : Data Entry Macro.xlsx
View 3 Replies
View Related
Sep 5, 2008
I have used the function = now() to have the most updated time but it updates a workbook when I open it in the first place. How I can avoid this?
View 9 Replies
View Related
Oct 18, 2013
Let's say that in column A I have numbers,"Yes" and "No". I want in column B to have only the numbers from column A, in the same order without any empty ranges, and everytime I add in column A a new number, column B to update automatically with that number. Let's have an example:
A B
Yes 12
12 13
No 10
13
No
10
Yes
And if I want to add in column A:
A B
Yes 12
12 13
No 10
13 25
No 15
10
Yes
25
15
So the column be will update automatically. I already tried =IFERROR(INDEX($A$1:$A$10,SMALL(IF(ISNUMBER($A$1:$A$10),ROW($A$1:$A$10)),ROWS(B$1:B1))-ROW($A$1)+1),") but using this many times get's my file very heavy and the excel is working slow.
View 13 Replies
View Related
Oct 27, 2008
I have some VB code which sequentially opens over 200 workbooks to extract data from each and populate another workbook. These workbooks do have links to other workbooks in them.
For some reason when some of these workbooks are opened I get a requestor window asking whether I want to Update or Don't Update the data. I always want to Update the workbook and believe this can be done in VB by hiding the requestor?
View 7 Replies
View Related
Jun 21, 2007
I have a vlookup to another workbook. It works fine if both workbooks are open. But if both are not open and I open the workbook with the links and click Update, #VALUE! returns. I have attached the two files. I don't think it is my formula, but here it is anyway. =IF( COUNTIF([Tempozgrid.xls]June!$A$52:$A$83,A3),VLOOKUP(A3,[Tempozgrid.xls]June!$A$52:$L$82,12,FALSE),0)
View 2 Replies
View Related
Dec 11, 2008
I have a basic formula =C17+'Asset Depreciation 2008 Onwards'!C24, and I want to copy it down just using the drag function. Problem is that the second reference range of cells are in rows and hence when I copy it down it doesn’t automatically update the cell references because it want to update them by column number instead of row number. IE I want it to display =C17+'Asset Depreciation 2008 Onwards'!
D24, instead of C25. Do you know if there is any way of telling Excel that I want it to increase the column number by 1 every time, instead of the row number for this part of the formula?
View 5 Replies
View Related
Apr 18, 2007
I have been trying to remove or disable the message on update to other worksheet " To update all linked click yes......" I have try the following unsuccessfully
Sub auto_open()
Application.AskToUpdateLinks = False
End Sub
On the menu bar choose Edit ---> Links Can not choose manual, as the option is grey out (disable) I would prefer a vba solution, but I am open to anything to get rid of this message
View 2 Replies
View Related
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
May 15, 2013
I have read that there is a VBA macro in F11, but I also read that it would only sort the workshhet names, but not the data. I have Excel 2010.
View 2 Replies
View Related
Jan 16, 2009
Just need to delete some hyperlinks in column A on 50+ worksheets. Thought a loop through all the worksheets would do it. Only works on active sheet. Forgive my ignorance, don't really even know where it goes, once it works - module or workbook?
View 2 Replies
View Related
