I have a procedure that creates ranges all the way down Sheet1(2006). each range is 65 rows. When I run the macro, it takes the first 65 rows as a fill source and fills the page down. Another procedure names each range as a corresponding date. this works fine
How do I add a watermark in the back ground that reformats the name of each range from Wednesday_Aug_02 to Wednesday, August 2. I would want the watermark to be very large and slightly diagnal. Here is the code I use to fill and name my ranges for 2006.
Sub timelayout()
'fills the formated range down the page
Set SourceRange = Worksheets("2006").Range("8:73")
Set fillRange = Worksheets("2006").Range("8:12000")
SourceRange.AutoFill Destination:=fillRange
End Sub
Sub DefineName2006()
'names each range based on the date of the first named range
Dim i As Long
Dim a, b, c, x
Dim dt As Date
dt = DateSerial(2006, 7, 6)
For i = 8 To 12000 Step 66
j = j + 1
a = Application.WorksheetFunction.Text(dt + j, "ddd")
b = Application.WorksheetFunction.Text(dt + j, "mmm")
c = Application.WorksheetFunction.Text(dt + j, "d")
x = a & "_" & b & "_" & c
ActiveWorkbook.Names.Add Name:=x, RefersToR1C1:="=2006!R" & i & "C1:R" & _
i + 65 & "C1"
Next i
End Sub
Other buttons and labels on a user form tell the user the name of the current range, that is scrolled at start up. the name is reformated and put in a label. Buttons allow the user to jump to tomorrow, yesterday, next week, last week. Things work I just want a water mark in the back ground to further help the user see which day they are on.
I do all of our invoicing in excel and want to be able to print out 2 copies of an invoice from a macro assigned button. A watermark "Copy Invoice" is required to print diagonally across the A4 page but on one copy only.
I am trying to display watermark text in a cell based on the value of another cell. For example:
If in Column B, cell B2 states "Mileage", Column C, cell C2 needs to say "Please enter Start and Destination...". I want column C (cell C2) to be my input cell as well hence the reason i'm avoiding the use of an IF formula.
I'm open to a VBA solution if this works? Tried conditional formatting however it will only display colours, not text?
I have to print the admit card of each students with their details like Name of student, Fathers name, roll no., subjects, examination center years, etc. in a given admit card format. I had scan the blank admit card and used as a background image in excel but the image of the admit card does not print in excel except the cell values that I had entered.
I had made the database of all students details. I want to use the students database to print students data on the scanned admit card image. I also want a option to select the name of the student before printing (to verify the details). Please help me how to do it in excel. I am using excel 2000.
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I am working in excel 2010. I have a tracking document that lists free tickets and their expiry dates. In the adjacent columns we track redemption details of these free tickets. What I want to do is return the oldest expiration date from A only if the ticket has not been used (i.e. B is empty). This will allow me to see the date the upcoming tickets about to expire so we can make sure they are used.
A________________B Expiry Date________Redeemed by 15/08/2014 15/02/2014 15/08/2014________John 15/02/2010________Marc 15/02/2011________Bob
I am trying to automate a process where a series of numbers would get populated according the range values. Also I am trying to get the automation to pick up the next range when finished with first one and continue with the task.
Here's what I have as start info and where I want to get to.
Currently my Macro should: Turn off any filtersNumber column A from 1 to 1000 (starting in A14)Drags formula from K14-O14 down to last row of data shown in column Athen puts cursor in last empty cell in column B ready for user to enter data
On point 3 - I want the range to be K14-O14 if active worksheet equals "EXCHANGES" but if its on the "VALUATIONS" tab the autofill range should be L14-P14
I have found bits and pieces of macros on the internet and put them together so if my macro below is not the most effective for my needs but here it is in it's current state:
Here is my macro:
Sub AddNewEntry() 'TURNS OFF FILTER IF FINDS ONE ON Dim wks As Worksheet
I was just recently forced to create my first UDF and after how well it worked I now am very interested in learning more. I am trying to create a function to sort a range by the values in a specific column and return the range. I know this should be really simple but for some reason my code dies whenever it gets to my inner-most loop. I need to use this in a larger function but for now this is my only question. I did find that Excel 2007 has built in Functions for this but my company still uses 2003.
My Public Function SortRange(rngToSort As Range, valCol As Integer) Dim Swapper As Variant Dim i As Integer, _ j As Integer, _ k As Integer
For i = 1 To rngToSort.Rows.Count For j = 1 To rngToSort.Rows.Count - i If rngToSort(j + 1, valCol) < rngToSort(j, valCol) Then For k = 1 To rngToSort.Columns.Count Swapper = rngToSort(j, k) rngToSort(j, k) = rngToSort(j + 1, k) rngToSort(j + 1, k) = Swapper Next k End If Next j Next i SortRange = rngToSort End Function
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....
Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.
How to create a sheet to generate Random numbers from 2 specific list of a main list range of 36 Numbers. (List A = Specific 15 numbers, List B = The remaining Numbers from these 36)
Example :
-The Main List Range is from Number 01 to 36 -The Specific random list will be 15 Numbers of these 36
List A-. The Specific 15 Numbers are: 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33 List B-. Remaining Numbers : 04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36
So
I need to generate ONE Unique Random Numbers of List A ( 01,02,03,10,11,12,13,20,21,22,23,30,31,32,33) In Cell A1 In Cell A2 In Cell A3
And from List B, (04,05,06,07,08,09,14,15,16,17,18,19,24,25,26,27,28,29,34,35,36)
I need to do the same thing In Cell A4 Cell A5 Cell A6
It's possible to have a 6 cells with random but Unique Digits? (not repeated numbers between the 6 cell ??)
I am trying to write a macro which will autofill specific columns. The macro will set the range from the start of my autofill to the end of my autofill as a constant range.
The problem I need to get around is the end of my range can always change each time I run the macro. For instance, the first time I run the macro I may only need to autofill from row 4 to row 15. The next time, I may only need to autofill from row 4 to 23 (because of user updates). How can I make the end of my range not be a constant address but variable?
I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select If Myrange = "x" Then StandHTML = StandHTML & "Important Text" End If
I like to create "templates" for files that I work with on a reoccuring basis, just to make things simpler. The current template I am working on tracks items processed by day and is used for two reporting purposes; 1 totals the pay ending items processed so I have the dates laid out based on the 2 week period with formulas for that. The 2nd way it is reported is by the month. Since this is a template, only the first day of the first pay period for a calendar year needs to be entered and the rest of the dates populate based on that date. What I would now like to do is add columns for January - December monthly totals using a formula that will read something like "if column A (where the date is) contains 1/1/2014 - 1/31/2014, then sum up column L" and than copy that formula for the remaining months.
code to take jobs that are done on one spreadsheet and send them to the next available row of a specified range on another worksheet. I am also looking to incorporate a way to delete the empty rows that are left behind.
I have already made code to select the completed jobs, but am still unsure how to approach the next part. I can't even paste the selected range to another sheet without errors from range sizes.
The following code is done up to the point where I cut my selection.
Sub Update() Worksheets("OpenGen").Activate Dim c As Object Dim rngA As Range
I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.
I need to be able to query a large date range by a small beginning and end date range and return a count when the value is = each search criteria. i.e. - Search one year of dates from a table by Beg: 7/23/2012 to End: 10/21/2012 and return a count. The beginning and end dates are dynamic and I will need to reference the cells, i.e. B102 "Beg" B102 "End" and not a static date.
I have a named range that expands and contracts based upon the amount of data that is in some column. Call it AllData_UsedRange.
I have another named range that actually refers to a range. Call it AllData.
Column A Row2 56 Row3 44 Row4 65
AllData is a named range that refers to the range A2:A65536 AllData_UsedRange refers to A2:A4 by way of this formula. =OFFSET(AllData,0,0,COUNTA(AllData))
How to I obtain an address of AllData_UsedRange in VBA code?
These do not work... ThisWorkbook.Names("AllData_UsedRange").RefersToRange.Address Evaluate(ThisWorkbook.Names("AllData_UsedRange"))
I'm trying to make a by month spreadsheet that has all twelve month ranges starting in for a3. in a3 it would have the start date and in a4 it would have the end date. I'm trying to locate all of the dates between those two dates and pull in the profit ammounts from another sheet, the results would be in row 5. I would also like to pull in the loss amounts and have them in row 6. All corresponding with the date range in rows 3 and 4.