I have a List in 2 sheets with names:-
"Article"
"New List"
Heres what i am looking to do either with a tool or a macro,
If Column T of sheet name "Article" matches with Column T of sheet name "New List" then
Copy the value from "New List" to "Article"
Value to Copy is target.Row(matching row) and the Column is G.
in other words
If
A row in Column T (!Article) = to a row in Column T (!New List)
then
A row in Column G (!New List) copy to a row in Column G (Article)
I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken Cow Donkey Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
I build a tool in excel to make an analysis per industry (30 industries). I want to compare the results on the first sheet, as a summary. All the information is now scattered over the sheets, but what I want to do is when you change the ticker in column A, it automatically retrieves the information from on of the sheets for the specific company. I will try to make myself clear to attach a screenshot.
So if you change ticker in column A, I want to fill columns C:D:E, G:H:I, K:L:M, O:P:Q, etc automatically according to the company name.
It opens a file, does nifty offset formula to compact rows A and B to rows E and F. The problem, is once it is done it leaves a trail of 0's in cells that had no data in the original file.
I have been trying to figure a way to just delete the rows in column A that have a zero in each worksheet (there are 7)
Code: Option Explicit Private Sub CommandButton1_Click() Dim fromwb As Workbook Dim ws As Worksheet Application.ScreenUpdating = False ' Opens file to select With Application.FileDialog(msoFileDialogOpen) .Filters.Clear .Filters.Add "Excel 2007",
and so on so we r going down with cells in sheet1,and we r making them = to a definite cell in all other sheets
anyway here is the code
if u will creat a column with values sheet1 sheet2 sheet3 and so on then
Private Sub lolla() i = 0 Do Until i = 5000 i = i + 1 Sheets.Add After:=Sheets(Sheets.Count) Sheets("sheet1").Select Range(Cells(i + 1, 1), Cells(i + 1, 1)) = "=" & Range(Cells(i + 1, 3), Cells(i + 1, 3)) & "!b2" Loop End Sub
I have two tabs BIN QTY and ORDERS. On the ORDERS tab Column A is the order number and is duplicated several times depending how many line items are on the order. The second key is Column H which is the part number which is unique per sales order. I'm trying to use these two values to look up or find the matches on the Bin Qty tab.
-The data in Column A (order tab) gets compared to Column B (BIN QTY tab) -The second match is the Item no. Data Column H (order tab) to Column C in (BIN QTY tab).
-Once both values match it needs to pull the value from column G (BIN QTY tab) and enter it in column N (ORDERS tab).
My example is highlighted in blue with the result in green. I've tried several different index and match formulas with no luck. my Last was
=IFERROR(INDEX('BIN QTY'!$G$1:$G$7957,MATCH(ORDERS!$A1,'BIN QTY'!$B$1:$B$7957,0), MATCH($H2,'BIN QTY'!$C$1:$C$7957,0)),0) MY ORIGINAL SHEET IS MUCH LONGER
I have a workbook with 180 Sheest. I need to copy sheet name and paste to column Name. In the Column Year write 2013.Finally I need to all sheets as show below in in Sheet Farms. Doing this one by one is time consuming and with error risk. I think a loop can do this,nevertheless, I don't Know how to do it. Column size can be different in each Sheet
Sheet name Famr1 CodNameYearDescTotal1Total2ProvCnt 1234Apples200xxxyyyzzz 3412Bananas400xxxyyyzzz 2358Oranges500xxxyyyzzz 8956Pines800xxxyyyzzz
Why my code is not working. When I choose a single column it works. Once I select more than one column it doesn't work. It something to do with my "column1:column2" reference.
I need a simple Macro that will, sheet by sheet, search the entire workbook. However, it only needs to search Column A, and there need be no text box, because the user will not define the text. The search text will simply be "X"
The real issue that I'm having is that I need it to find the first item, then offer me the option of selecting "Next" "Previous" or "Cancel" "Cancel" of course would mean that the item found is the one being searched for.
1. Cells in column A, Sheet 2 are compared with the Cells in column A, Sheet 1.
2. Sheet 3 is produced containing all the rows in Sheet 2 for which there is no duplicate cell in Column A, Sheet 1.
3. The rows copied from Sheet 2 to Sheet 3 are highlighted on Sheet 2. Attached is a workbook with 3 sheets. Sheet 3 is the desired result (+ the cell highlighting on non-duplicates on Sheet 2).
I have three spreadsheets. They all contain different data but each one has a 'Rental Equip ID' column. Is there a way to take these three spreadsheets and consolidate in to one spreadsheet with all the data on one sheet? I have included an example of each sheet. The column headers are in bold. I can send an example file examples if needed.
Rental Dscr Rental Equip ID Rental Group Rental Sub Group Rental Qty Rental Cost
i am working in office. my boss has given me 68 work sheets to analyze. i have completed all the task except one. i want to add a capital D to the left of numbers into column B of 68 worksheets. excel sheet is attached. it is only sample. i have more than 6000 record in each work sheet. but how can i do this in only one click.
I have a workbook with over a 100 worksheets and need a macro that will apply the following column width to all the worksheets. Col S → 4; Col T → 5; Col U 5.2; Col V → 5; Col W → 4; Col X → 7.5
Step 1: I have data coming from a data dump which is placed on the "Summary" sheet of my excel workbook. I need to take column A (beginning at A8) and create a new sheet (based on "Template" located in the same workbook) for each name in column A.
Step 2: I need to place the name of the new sheets in cell C4 of each sheet so I can do a lookup using C4 as my lookup_value, so this can't be a formula like "=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)" because lookup doesn't function properly.
Step 3: Delete "Template", so that the only things left are the "Summary" sheet and the new sheets.
Each department will have their own workbook with a "summary" sheet and different sheet names although they will all start off with the same data dump and will all be in the same format. Each department could also have a different number of new sheets added depending on information from the data dump.
I found a utility (ASAP Utilities) which will do the steps I need done, but it won't record in the macro.
Budget time is fast approaching and each department needs their worksheets.
Col L John Doe New York Past Locations Previous Jobs Male Previous Schools
In Sheet 2, I have another list where the user will manually enter sub elements for some of the elements of Sheet1. It looks like this...
Column A |Column B |Column C Past Locations|Previous Jobs|Previous Schools
Below that last row of headers, the user will make inputs. the list for each column should be able to run down to say 100. The inputs may look like this....
AZ |Plumber |XYZ Elementary MD |Waiter |ABC High School IL CA
Now, the problem is I need to combine these two into a single column in Sheet 3 in a special way. The output would look like this.
John Doe New York Past Locations AZ MD
[Code] .....
Notice that I am taking the list in Sheet 1 as is, until i run into a value that is the header in Sheet 2, in which case I take all the contents of that header column until I am done, and then go back to sheet one, and repeat the process. I need the output in one column in Sheet 3; i don't need any special formatting.
I am trying to pull peoples names from 3 diferent tabs into one column in a separate tab. But if a name is shown more than once only display it once. How can I do this?
I have a sheet with about 200 columns of data and 1000 rows . I'd like to split this sheet into multiple sheets based off of info in column A. Column A contains numerical categories 001, 002, 003 etc So my result would be a sheet for each numerical category with all info from previous sheet. Each category contains 5-30 items associated with that category. Any other way to split this without sorting, copying, and pasting?
I have a database of information on which one of the columns is supervisor. I need to put each supervisor and associated employees on separate sheets. How do I do that?
Column Headers Last First Title Supervisor Rating Box
Need the supervisor column broken out on a sheet with all employees listed in the data base.
I currently receive a download that contains multiple reports in one excel sheet. Each report is separated by the value "Vendor" in column A. I would like to separate each of the reports into a new excel sheet. Basically, I will need to copy all rows between "Vendor" and "Vendor" values and paste to a new sheet.
I have a huge db that has a column "C" with a list of names. I have been creating tabs and naming them according to that list. I wonder if there is anyway I can create and name the tabs automatically. I already searched for threads in the forum, but only found this this backwards "tabs to cells". By the way, the names in column "C" sometimes repeat.
I'm looking for a formula that will match columnA sheet1 with columnA sheet 2 and where theres a match (alphanumeric) will copy the whole of the row in sheet 2 onto an entire new sheet.
There are 2 sheets in the excel worksheet. in one sheet there would be drop downs the 2nd sheet will have 4 columns A,B,C,D) Depending on the selection in sheet1. If a1 = Y then columnA in the 2nd sheet should be hidden. If a1 = N then columnB in the 2nd sheet should be hidden. how can this be done..The key is the columns to be hidden are on a different sheet and that is where I am having the difficulty.
Have two sheets, both very different, but each containing Last Name, First Name and a column for email addresses (one sheet has the email addresses entered, the other does not)
What we are trying to do is look for matches in Last/First columns between the two sheets and if/when found copy the email addresses from one sheet to the other.
I have a book with 250 worksheets, with one cell of data per sheet. It is the same cell in every sheet (C7). I need to somehow aggregate all of this into one column on the first sheet, 250 rows.
i need a code line to modify in the code that when find duplicated string (found in 2 sheets) Copy to a next empty Column of a 3rd sheet
how code work: The code is working Fine (excellent!), Its compare 2 given range from 2 sheets( "sheet-1" and "Page-1") and if duplicated string is found on such Ranges, with condition of a min/Max of 5 to 12, then these string are copied on a new sheet called "Intercepted". The problem (is my mistake ) is that the small report is copied, BUT is not copy continuously to next empty column.
I tried to modify my self but not success because i don't know which line delete and where to add the the new code Line.
Basically I have an Excel workbook with 6 different worksheets containing data. In each sheet I have two columns that are the same in each sheet, called "Category" (column F) and "amount" (column G). In one of the sheets I also have "Category" and "amount" in column H and I.
I want to write a VBA code that copies these columns (until blank row) and pastes them underneath eachother in the summary sheet.
I am new to using Macros and have not had great progress building a macros to make my life easier.
What I am trying to do -In my main database tab 'FW Telecom' Use column A ( a set of numbers) to create a new tab based on that number, with a 'FW' infront IE ( column A shows 11, i want the tab to read FW 11) -I want to create one for every number in the column -Then I would like to copy my 'Template' tab to each new tab. -From there I would like to fill in the information in the new tabs from the main database tab 'FW telecom' -Since they will all be copies of the original template, i figure i can just get it to pull from the first column A and then fill in the info.
Not too much in theory going on here, just take my database and move the pertinent information to a user friendly look which I set up in 'template'