I have a huge db that has a column "C" with a list of names. I have been creating tabs and naming them according to that list. I wonder if there is anyway I can create and name the tabs automatically. I already searched for threads in the forum, but only found this this backwards "tabs to cells". By the way, the names in column "C" sometimes repeat.
on sheet1 I have a button I need to do the following when clicked: (1) name the next 30 sheets based on cell values in sheet1 (2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
I want my charts to be located in a new sheet each. I also need their names to start with "GR-Chart[number here]". So they should be GR-Chart1, GR-Chart2, GR-Chart3,......
ActiveChart.Location Where:=xlLocationAsNewSheet, Name:= "GR-Chart" & [this part I got wrong]
I have a workbook with a sheet titled Variables. There are 6 additional sheets in the workbook and each sheets needs to be named with the cell contents of A2:A7 in the Variables sheet. I have attached the workbook and you can look at the names in the sheets tabs to see what I'm trying to do here.
The workbook is too large to attach but can be viewed here: http://www.shuffleupanddeal.org/name_sheets.xls or http://www.shuffleupanddeal.org/name_sheets.zip
I have got this macro working OK but now I need to add a 2 letter prefix/suffix depending on what time it was created (am or pm). Detail: If the sheet is created between 0600hrs and 1800hrs then "DS" and likewise between 1800hrs and 0600hrs then "NS". Outcome: The sheet will then have a name like - "22 Mar DS"...code included below
Im sure there is a post somewhere on this forum as I have seen it before but I cant find it anywhere. All I want to do is be able to select Sheets Sun,Mon,Tue,Wed,Thu,Fri,Sat without naming each of the sheets. The post I seen would select all the sheets between the two sheets that were stated in the vba code. something like: Sheets( Array("Sun" To "Sat").select
Is there a macro available which will create a pre-defined name for a pivot sheet, which will contain the word "Pivot" followed by a underscore "_" and the name of the sheet on which the pivot is applied.
Example: I have data on a sheet called "Salary" and put a pivot on "Salary" on a new sheet, the new sheet should be auto named as "Pivot_Salary"
I have a template worksheet that I would like to copy and name according to a list that I have. Currently there are 57 objects (lack of a better word) in the list.
This is what I have currently.
Sub CreateWorksheets() ' ' Macro1 Macro ' Macro recorded 7/8/2008 by amkgri '
' Dim ws As Worksheet Dim Y As Long Dim I As Long
Y = ActiveCell.FormulaR1C1 = "=+COUNTA('Sales Managers'!C[1])-2" For I = 2 To Y
Worksheets("Template").Copy Worksheets(Worksheets.Count) ws.Name = I Next I End Sub
But it is currently not doing anything. I borrowed some of the code from another thread that is how I got this "far"....
The reason -2 is that the first row is column labels and the last row is my Template.
So I am wanting to start with the second row and continue until one row from the end.
The list of names that I am wanting to use is basically the list of states.
I have an Index Sheet where I would be typing the name of the Sheet and a Command button to execute the operation of Adding the Sheet with the name mentioned in the Column C..
We have prepared a budget workbook for our community group. It contains 12 worksheets, one for each month, and an "alerts" worksheet which flags key expenditure issues.
On the "Alerts" worksheet we have a drop down list, naming each month. By selecting the month, key expenditure statements on the same sheet are populated. For example, "Your YTD Child Care Program is exceeding your Budget Allocation by:___"
The blank field is calculated on the respective monthly worksheet. I know that IF statements can have a maximum of seven nested functions. Will LOOKUP be a better solution or is there another option?
I'm trying to delete sheets based on a list in Excel 2003 using VB, any ideas how to accomplish it as the various ways I've tried haven't even come close to working!
I have a list of names in sheet1, starting with cell A3. I would like to copy sheet3, insert it after sheet3 and rename the sheet to correspond to the names in the list.
If i have 30 names I would like 30 sheets. If i add a name, I would like to repeat the copy, insert and rename steps for the extra names as i add them.
I have a table. I have added a new column on the far right, and as I don't know how many columns my table has I simply use:
[Code]....
Now I want to assign a name to that column; but as I don't know the column position, or number, how do I do that???
Now I need to place some information in the cells in that column. If I know the position of the cell we just placed the header name in, I know I can use offset to accomplish this, but:
How would I know the location of that cell other than running a "Find" on the entire header row.
If I have a table as noted below with the following assumptions:
- this table will likely grow - the 'Include' column data will change based on external criteria/formulas, so the 'Include' column will not be sorted. - Macros aren't an option as this sheet needs to be macro free.
A B C 1 Item Calories Include
[Code]...
How do I build a formula that I can place in a data validation drop down to only include 'Item's that have Yes indicated in the 'Include' column?
I've been researching this and found answers if the 'Include' column was sorted via offset, but I haven't found any to sift through when unsorted. I feel like there is a simple answer to this that I am missing. Here is the sheet --> ExampleSheet.xlsx
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
I need to name a dynamic range of cells. The only constant is the column - H, and the heading "MRC".
MRC column in a table represents an array formula. Unknown is the row where it is going to show up and the number of rows that this array formula will take. I need to name this range (active cells based on the array formula) but do not know what row does it start with and how many rows will it take.
It is not the last table in column H either but there are 2 empty rows before the next table.
Trying something like that...
========================= Set aCell = Range("H:H").Find(What:="MRC", LookIn:=xlValues, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) If Not aCell Is Nothing Then
I have 6 worksheets in my file. In sheets 1-5, column A2:A26 list people's names. Some people's names appears on more than one sheet. Not all cells are populated with a value.
ex. SHEET1 COLUMNA Bill
[Code]....
My attempt was... =INDEX('Week1:Week5-!$A$2:$A$26,MATCH(0,COUNTIF($A$1:A1,"Week1:Week5"!$A$2:$A$26),0))
where the sheets were Week1-Week5 and the values on each sheet was A2:A26. But I think there's an issue with Excel being able to 3D reference for these types of functions.
I have a workbook composed of many worksheets with varying names. Of the 40 or so worksheets, 25 of them contain data that I need to copy and consolidate into a master summary sheet within the same workbook. All of the sheets I need to grab data from have a worksheet name that ends in “(Data)”. All worksheets contain data that starts on the same row (row 8) but the number of rows of data will change daily. When I copy the data range on the individual sheets I do not want to copy the header row. I’ve tried various uses of the offset command with no luck to resize the selected range. I’ve also tried giving each range a named Dynamic Range and referring to this name in VBA code but that didn’t get me very far either. So the flow looks something like this:
1. Find all sheets with name ending in “(Data)” (i.e. “Project X (Data)”) 2.For each sheet found, find the data range and omit the first row of data. 3.Copy selected range. 4.Go to sheet “Master” and find the last row of data. Move down one row to the first empty row and paste copied range. 5.Go to next sheet and repeat.
I currently receive a download that contains multiple reports in one excel sheet. Each report is separated by the value "Vendor" in column A. I would like to separate each of the reports into a new excel sheet. Basically, I will need to copy all rows between "Vendor" and "Vendor" values and paste to a new sheet.
There are 2 sheets in the excel worksheet. in one sheet there would be drop downs the 2nd sheet will have 4 columns A,B,C,D) Depending on the selection in sheet1. If a1 = Y then columnA in the 2nd sheet should be hidden. If a1 = N then columnB in the 2nd sheet should be hidden. how can this be done..The key is the columns to be hidden are on a different sheet and that is where I am having the difficulty.