2 Sparklines In Single Cell In Excel?
Feb 20, 2014
I have data in 2 columns as follows:
Col. ACol. B
10 15
10 14
10 15
6 13
12 5
14 8
10 10
13 6
9 14
10 9
Data in Col. A is converted as a line sparkline and data in Col. B is viewed as a Column sparkline.
I wish to view both the sparklines superimposed on each other in the same cell using excel's native sparkline option (not a third party software). Is it possible using some sort of Excel wizardry?
Sample file attached : sparkline.xlsx
View 3 Replies
ADVERTISEMENT
May 6, 2014
I want to use the offset function in a named range to be the data source for a column of sparklines, I want the sparkline to grow incrementally as data is updated per month.
The data in the table I want to add sparkline to is pre-calculated with SUMIFS formulae, and updated monthly from a dump of detailed data. I am trying to automate this as much as possible, and have pre-calculated future performance data in the table. I used an IFERROR to return a hyphen for the future reporting months.
The problem is, the sparkline is reading the hyphen as zero value, and the sparkline is showing as if it was reporting data to the end of the reporting period.
So my question is - is there a better IFERROR option that wouldn't be read as data, or is there a way to define the range by date compared to a data date?
View 7 Replies
View Related
Jun 4, 2014
I am generating sets of data in Sheet2 to be used for Sparklines in Sheet1. These Sparklines will sit in Column D alongside other pieces of data. The data needs to be sortable by Column A which is a list of Cities.
When sorting my data, Z-A for example, all the relevant data sorts just fine but the Sparklines do not move with the rest of the data.
Is there a way to make Sparklines move with Column sorts?
View 1 Replies
View Related
Mar 4, 2013
I am experimenting with sparklines and wanted to know if there is a way that I can lookup the last 12 results of a particular field and return a sparkline for that.
For example, on my report tab I have a list of names in column A and in my data tab, I have a list of the same names with a different value in each column (each month).
I want to have a sparkline beside each persons name in my report tab which will lookup the last 12 months of data for that person and display it in a sparkline.
View 8 Replies
View Related
Jul 2, 2012
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
View 7 Replies
View Related
Dec 2, 2013
I Want users to be able to copy a reference number from a an external program into excel, this works well for single cells but the cell I want them to be able to paste the information into is a merged cell and keep getting the "Data on the clipboard is not the same size and shape blah blah error". What I can do to get this information to paste? Is there some VBA that can kinda trick the cell to believe its single or when pasting it unmerges and then remerges again?
View 1 Replies
View Related
Oct 14, 2002
Is there a timer function in which i can have a countdown in seconds in a single cell in MS excel?
View 2 Replies
View Related
Jun 25, 2012
My Excel 2007 worksheet contains a cell where a percentage is manually input. A freight cost is calculated based on the input percentage. Typically, the percentage is 3-7% but once in a while freight is excluded and the percentage is zero.
My issue is that when a 0 is input the cell appears blank and I would like it to display 0.00%. The remainder of the worksheet needs to have the zero display turned off.
View 3 Replies
View Related
Nov 27, 2012
I'm using Excel 2010 and I'm having troubles displaying hiding my column B if none of the cells of column A contains either "(Quasi Echec)" or "(Quasi Russite)" at least once.
PHP Code: [URL] ......
Below are my 3 attempts.
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim c As Range
If Target.Column 1 Then Exit Sub
Application.EnableEvents = False
On Error Resume Next
[Code] ..........
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Sub GetUniquesInColA()
Dim rng As Range
Dim c
If Target.Column 1 Then Exit Sub
On Error Resume Next
[Code] .........
Code:
Option ExplicitPrivate Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim x As Long
Dim LastRow As Long
LastRow = Range("A65536").End(xlUp).Row
[Code] ...........
View 2 Replies
View Related
Mar 12, 2014
I've got problem with combining 3 cells into one. First cell contains text, second have date yyyy-mm-dd and last one is as previous. I'm using formula .
[Code] .....
And I'm getting: TEXT_41694_41701. How can that be corrected to use formatting for date format to get TEXT_yyyy-mm-dd_yyyy-mm-dd?
View 7 Replies
View Related
Apr 10, 2013
MS Excel 2010, WinsXP
how to highlight an entire record based on the value of a single cell?
I would like to highlight all records grey where cells in a column = "closed".
View 4 Replies
View Related
Dec 3, 2013
I have a worksheet in which i am asking a user to enter manually a number in cell E3. Suppose the user starts with 100, then the next time he is entering in E3 he shoudnt be able to enter 100 nor any number less than 100. I dont have a range for the numbers that the user is going to enter.Therefore countif function does not work. Is there any way that i an store the number taht the user enters first in cell E3 and then use that database to avoid the user from entering the same or a number lesser than that number.????
View 2 Replies
View Related
Apr 15, 2014
I am using Excel 2010.
At work, we've got a program that outputs the results of a search into an Excel file, in column 1 below.
17,43,61,63
17
43
61
63
23,29,53,57,77,79
23
29
53
57
77
79
17,29,63,69,71,75,79
17
29
63
69
71
75
79
11,43
11
43
57
57
I need to get that list of numbers listed out to the right, with one number per cell. The list in column one could possibly contain from 1 to 20 numbers, and the last number is always without the comma after it.
View 5 Replies
View Related
Apr 24, 2012
I'm trying to make a macro in Excel 2003 to create x amount of named worksheets that are a copy of a different worksheet.
1. I have a main worksheet that will have a number manually entered into a cell (lets say A1);
2. I have a 'template' worksheet;
3. I'll assign the macro to a button on the main worksheet
If I enter '10' into cell A1 of the main worksheet, I'd like to click the button and have Excel create 10 copies of the template worksheet. These new worksheets should all share the same name with a number after them (ex: banana 1, banana 2..... banana 10).
View 2 Replies
View Related
Aug 16, 2013
I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
View 9 Replies
View Related
Jan 7, 2009
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
View 9 Replies
View Related
Jan 22, 2013
I am wondering if it is possible to use a formula or IF statement within a macro to add a single row at a time if a cell shows as False? For example, if the value in column AD is False, I want it to add a single row under that row that has False. However, if the value in column AD is True, I don't want it to add a row and skip to the next record. I need it for approximately 500 records.
View 2 Replies
View Related
Dec 10, 2012
I want to save a single sheet from my Excel file to PDF. But this Macro saves all the sheets in separate pdf files. How do I adjust it to only save the breakdown sheet of my Quoting workbook?
Sub Save2PDF()
'
' Save2PDF Macro
Range("L66").Select
ActiveWorkbook.SaveAs FileName:= _
"Macintosh HD:Users:myratriegaardt:Desktop:Q1Breakdown.pdf", FileFormat:=xlPDF _
, PublishOption:=xlSheet
ActiveWindow.SmallScroll Down:=-160
End Sub
View 4 Replies
View Related
Apr 17, 2013
I am using Excel 2010 and need to create something like a histogram that will have large regions of null values. In other words, my histogram might look like this...
x
x
x x
x x x
__x_________x___________x______
100 250 420
[My laboriously drawn histogram does not display correctly. It is supposed to have 3 x's above 100, 2 x's above 250, and 5 x's above 420]
I have data in the form of:
Value Prob.
100 30%
250 20%
420 50%
I have Excel giving me a histogram that looks like this...
x
x
x x
xxx
xxx
[This histogram also didn't turn out. Again, it is supposed to be 3 vertical x's, 2 vertical x's, and 5 vertical x's]
What I have tried to do is to create a list based on the lowest and highest numbers (e.g., 100 and 420) and split that into equal increments. I then intended to use a VLOOKUP or something to pull back the probability associated with the number in my list nearest the data value I have.
I couldn't get VLOOKUP to work correctly, so was happy when I found the following thread on Ozgrid. [URL]
However, in each of the solutions listed in that thread, I get faulty results. I am attaching a file that shows the errors and what I am trying to get : Example.xlsx
Perhaps there is some easier way to do what I am attempting to do. This architecture makes sense to me, but sometimes the perfect solution doesn't make sense until I see it...
View 5 Replies
View Related
Feb 18, 2014
I'd like to apply multiple formula to a set of cells on a summary page. My summary page also contains 3 variable dropdowns, and I'd like to display data based on the text selected in those dropdowns (pulling data from 2nd tab "Variables")
The following formula works in the first instance:
=IF(AND(H4="Product Type A1", H6="External", H8="Existing"), Variables!C4, 0)
What I'm struggling to do is add additional formula to the same cell in order to deal with the remaining eventualities of the drop down variables:
Variable 1:
Product Type A1
Product Type A2
Product Type B1
Product Type B2
Variable 2:
Internal
External
Variable 3:
Existing
New
Or am I better using a VLOOKUP or something?
View 2 Replies
View Related
Jan 23, 2014
Following the tips doesn't allow to remove a character.
I exported email addresses from Outlook and they have the following character ' in front of the email address.
Using Excel 2007.. it says :"check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected worksheet. Excel cannot replace data on a protected worksheet"
So I made a new file, and copied and pasted the cells into the new spreadsheet.. same message.
View 4 Replies
View Related
Dec 21, 2011
My set up office 2007 win xp pro ie8
is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format
Then I would like to be able to do the reverse load a CSV file back in to a work sheet
Expanding upon this
1. Click a command button with caption “save”
2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on
3. Click another command button with the caption “load” interact with usual dialog box.
My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV
The reason this is required is to mate up with the php on the server side
View 3 Replies
View Related
Dec 1, 2013
I have a macro that imports text file and puts a comma after each number (alphanumeric also). I have tried to change it to put single quote around the number and comm afterwards.
Text file listing
123
456
789
When I run my marco I get the following
123, 456, 789
which is what I want...
Now I want the same text to have single quotes around the data example:
'123', '456', '789'
All that I have tried to adjust keeps missing single quote at the front end and also missing the single quote at the rear end example: 123', '456', '789
Here is the vba I'm running
Sub GetserialNumbers()
Dim FileNum As Long, PathAndFileName As String, TextFromFile As String
Const Delimiter As String = ", "
[Code].....
Whe I run this I have to select the text file to get. I keep it in my documents as a quick access. I'm using MS VBA 6.5 Excel 2007 Windows 7 Enterprise.
View 2 Replies
View Related
Apr 11, 2014
How to create a summary/index sheet for multiple sheets in single excel file...
View 1 Replies
View Related
Feb 2, 2010
Hi everyone,
I've got several Excel files that need to be edited separately.
Once they have been edited, I need to paste the content of each file in a single separate Excel file.
Is there a way to retrieve the content from all the files in a folder, and merge it in a single file?
For example:
3 separate files > File1, File2, File3
Merged file, sheet1
File1
File2
File3
View 14 Replies
View Related
Aug 28, 2013
I have multiple buyers that use an Excel workbook containing several macros to perform edits on other workbooks they receive via email. Generally, they have the workbook containing the macros open, and they can double-click the workbooks they receive in the email messages to open them, and the macros are available from the "master" workbook.
Recently, however, some of the buyers have been getting new computers running Windows 8 and Office 10. Now when they have the "master" workbook open, and double-click the attached workbook in an email, (Outlook 10), the new workbook opens in a new instance of Excel, and as a result the macros are not available to run on the newly opened workbook.
The work around has been to right-click the attachment and save it to their desktop, and then use the File/Open command from the "master" to open the new file. This is a hassle and takes extra time.
I'm sure I am overlooking a setting somewhere that tells Excel to always open new workbooks using the same instance of Excel, (there are two people using the new systems that aren't having problems, and two that are), but for the life of me I can't find where to set these parameters.
View 6 Replies
View Related
Oct 22, 2013
I am trying to reformat the attached doc into one single column, It's a race listing of overseas marathons and I need it to look like this
Event Name
Event Date
City
Country
Entry fee
Website
in date order, one event after the other in a single column so I can flow it into a word doc ready to be designed. I need to apply in Excel (I am using 2007) to get this doc into the required format?!!
View 5 Replies
View Related
Feb 14, 2014
So i want to be able to send a single Excel sheet to a recipient, not already pre-defined in the VBA. I am trying to get to where i can click a button/link and a window pops up, asking me to enter recipient's email address. When I enter the address and press- 'Send', the email is sent using Outlook.
View 4 Replies
View Related
Apr 2, 2012
I used VBA codes to apply different passwords for different worksheets in a single excel workbook. They worked fine. Then i applied a password to the VBA code itself through the VBA project properties. Also worked.
But my problem is that, if any one enters a wrong password to open any of the worksheets, the VBA will open an error message window and when "end" option is clicked, the VBA code will open without any prompt for the password.Thus the entire purpose is defeated.
View 9 Replies
View Related
Apr 16, 2012
How to write a code to import all tables from a single word document into a single excel sheet? (we don't know exactly how many tables there will be,or how many rows in a table there will be , but the columns are certain, which is 9, from A to I.
View 4 Replies
View Related
