I'm working on a project and need some assistance. Using Excel 2007, how do I add up the total of the word "apples" to a cell.
Example: If Cell A1,A10,A25,A30 all have the word apple entered, how do I add them up in lets say cell B10.
Also, I need to do it where I can enter multiple words in 1 cell and have it organized according to how many times the word is used.
I have 1 or 2 maybe 3 words in a cell (difference words). I need to count how many of the same words are in the cell and place the number of words another cell I have included a file the same word may appear in other cells in same column which has to be counted into the same cell
View 2 Replies View RelatedI have a problem to count some words in a column: in fact, in the cell they can write several words and my objective is to count in this column how many times there is the word "info" but as they can write several words in the same cell,(for example: speciality, info, degree) I can t really count how many times the word info is written in the column.
View 13 Replies View RelatedI am trying search & count 2 or more words within a cell using a worksheet function. See below example:
The texts are in A1 (only)
Entered by John at 02:19 PM on 02/13/2007
Entered by Smith at 02:20 PM on 02/13/2007
Entered by John at 02:30 PM on 02/13/2007
Entered by John at 02:21 PM on 02/12/2007
Entered by John at 02:22 PM on 02/11/2007
The words I am looking for are "John" and "02/13/2007" and the count should be 2. I bolded what should be counted.
I am looking for code to look at a cell and see if it contains more than one word. So if Cell A has one word Cell B = ? If Cell A has two or more words Cell B= something else. I assume that searching for spaces would be best way to accomplish this
View 5 Replies View RelatedI want to count the nr of words in cell without counting the repeated words.
For example, in "this is a ball and that is a square", the total nr of words is 9, and the total nr of non-repeated words is 7, because "is" and "a" are repeated twice, and I just want to count it once.
I am trying to count words in seperate rows,columns in a spreadsheet. I have tried to use the formula that was suggested in one of the formula pages but I did not get the correct answer. I tried to do just like the information said with a1:a5. I did get 5 as an answer but when I deleted one of the words it still said there were 5 words.
View 4 Replies View RelatedI have tried Sumproduct and Countif and can not get a proper count of rows that contain specific words in multiple columns. I have attached an example spreadsheet where I am looking for a result of 7 rows that contain 1 to 4 specific words within phrases. The example looks for the words: "virus", "spyware", "malware" & "adaware", and ignores any other words like "aware" or "ware".
View 7 Replies View RelatedI have a column of address data that looks like
1924 ogden place blvd west unrulu
982 n aoto st apt #1234 easrlr
...
and I'd like to use a couple of formulas in the two columns to the right of this data
1st column:a formula to obtain the number of words in a cell
2nd column:a formula to extract the last n words from a cell (ex. the last 2 words)
so that the columns would have as their results
6 west unrulu
7 #1234 easrlr
I am making a content database and need to count the number of words in each cell...
I know you can count them with
=IF(LEN(TRIM(A2))=0,0,LEN(TRIM(A2))-LEN(SUBSTITUTE(A2,” “,””))+1)
but the the cells have line breaks so this formula won't work
I've understood that since there is a space before the new line, the formula will not recognise the space and therefore not recognise a new word.
I have attached a copy of a spreadsheet that I am putting together, What I need to achieve is, when a date is entered into the completion date cell the daily count down in the days left cell stops but still shows the value in that cell. The Annual or Monthly cal tabs are the ones i need the formula for.
View 5 Replies View Relatedexcel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
I need to count how many times an input in given on a same cell, and doing so on the hole column. Like when I enter "x" on cell A1 and it adds 1 on B1. If the input on A1 changes then comes back to "x" it adds once again 1 to B1.
For one Row I'm using this code but I really can't reproduce it on the others.
[Code] .....
I'm using Office 2007.
2007 Excel spreadsheet. My company currently shares ONE spreadsheet to generate new project numbers (Shown below). My issue is once a new number is assigned, it is supposed to be entered into our accounting software but that doesn't appear to be happening in some cases.
Is there a way that a pop up message can appear when column G is populated (Entered by)? Something like, "please be sure to enter this XYZ".
I have a worksheet with an inventory of items in cells in column A. I need to count the number of items listed in the cells in column B. I have data in about 1500 rows. The items in the list in each cell are separated with a space. Please see small sample below. I would normally do Text-To-Columns, but some of the cells contain up to 30 items.
Excel 2007
A
B
1
Grouping
Number
2
[code]....
I'm trying to convert the values entered by users into specific cells into a specific percentage. When I use this macro in Excel 2010, I can enter the value to be calculated directly into the cell and the macro runs automatically. When I open the file in Excel 2007, the macro does not calculate properly unless the value to be calculated is entered into the formula bar.
For example, in Excel 2007, if I enter '30' in cell E11, it should come out as '20%'. Instead it comes out as '0.2%' unless I enter '30' into the formula bar, which then calculates properly. It is far more efficient to be able to enter the value directly into the cell.
[Code] .....
I have a SS of a WW1 casualty list and one of the columns is Dates of Birth but the data has been entered in three different formats eg 21/2/1898 or 21.2.1898 or 21 Feb 1898. I have tried to Format Cells and change the date format to the slash but after highlighting a number of fields and right clicking they will not re format. Though i use Excel quite a bit i am a general user and dont understand it in depth.
article using =DATEVALUE(
am using Office 2007.
I use MS Excel 2007 and I was wondering if it was possible to enter data for certain things once, and have that data copied automatically every time I type the text. For example, if I type Blue Car in a cell and type 4 in the next cell, is there a way I can program Excel to enter that data every time I type Blue Car?
View 14 Replies View RelatedI am using excel 2007. I have a worksheet with a list of words I wish to step through this list replacing the selected words in another workbook with nothing (ie deleting them).
I have the following code
Code:
Sub replacewords()
Dim MyWord As String
Dim wbLibrary As Workbook
Dim wbWorking As Workbook
Dim myExcelColumns As Integer
Dim myExcelRows As Integer
Dim MyRow As Integer
Dim MyRange As Range
[code].....
It does not seem to evaluate "myRange";
The following formula counts the word WO in a row
I want it to also count the work WL
So basically want it to count WO & WL
=COUNTIF(M3:JS3,"wo")
I am trying to use Excel to do my manpower allocation and planning. So I have
a column of employees and a row of months. I then put in the project name
that each is working on in a given month.
then at the bottom, I just sum the number of people working on a particular
project in a month and do a simple calculation between the number of
available people and the number who are allocated. This works beautifully IF
each person only works on one project in a month. As we know, this is an
unreleastic assumption!
What I would like is for me to put in multiple project names in a cell and
for the 2nd table to be smart - i.e. if I put in Project A & B for John, then
it should count John as 0.5 for each A & B not 1 for each A&B. Similarly if
John is working on 3 projects, then it should count only 0.33 for each
project John is working on.
I would like to count the words separated by a "-"
Right now I have this below
=LEN(TRIM(J1448))-LEN(SUBSTITUTE(J1448,"-",""))+1
But what I would like is for the formula to count the WORDS and Numbers in a cell that are separated by a
"-"
OERT-JTF-JUA-JTF-ASG1-JMF-JMF-JTF
so the answer would be 8
I have a table with some reapeated words in, I wondered if anyone had any methods of counting words and displaying the total in number format. for example if I had in cell A1-Hello and A2-Hello and A3-Bye how can I get Hello = 2 and Bye =1
View 9 Replies View RelatedSheet3
BCD1Words in SentenceRepeated TimesSentence2I2I go to the cinema every month on last Sunday3Go2I go to work at 7 O'clock4 Worl Cup will start on 2010
Excel tables to the web >> Excel Jeanie HTML 4
i want to convert all the words in column d by get one word from the column d and skip repeated
example word "I" mentioned in d2 and d3 so i get "I" in cell b2 then count it it mentioned two times in column D
i can count how many "A" there is in a text put in 1 box and "B" to be put in another box etc.
View 9 Replies View RelatedI have searched and found many examples of code that will lock cells once data has been entered. But for some reason, I cannot get it to work in my workbook. The weird thing is, I have successfully got them to work on blank workbooks. I unlock a range I want people to be able to edit, I protect the workbook, I enter the code, and it works. But I do the same thing on my workbook, nothing locks.
I've tried locking all the cells on a sheet, and only unlocking a small range, as in the examples (A1:A10), and I cant get it to work. I've tried not pre-protecting the sheet, I've tried 4 or 5 different examples of code. If it wasn't for the fact I've gotten it to work on blank workbooks, I'd think VBA was disabled or something. I can't post a copy of my workbook for you all to look at because its on a stand-alone computer at work (and the USB is disabled for info-sec).
Excel Version 2007
I need a formula to count the total number words occurred in an array. It has to separate the "," and count.
Here is a scenario:
1.Apple
2.Banana
3.Orange
4.Mango
5.Banana
6.Mango
7.Orange
8.Apple, Banana
9.Banana, Mango
10.Mango, Apple
11.Banana
In my workbook, I want to count how many duplicate words in 2 ranges.
Eg:
Col A are more than 10,000 words and Col B are more than 10,000 words.
I want to count total duplicate words in these 2 ranges.
Usually it's to count for one unique word in a cell. But what if I have 2 or more unique word in a cell and need to be counted for?
for example
10827Holiday Decorations & Party Supplyholiday decoration supply10827Holiday Decorations & Party Supplyseasonal decorative
this category has 5 unique words in the synonym list
11044Facial massagerfacial11044Facial massagerbeauty care product11044Facial massagerbeauty appliance11044Facial massagerbeauty11044Facial massagerbeauty care11044Facial massagerbeauty product11044Facial massagerfacial appliance
this category has only 5 unique words although the synonym list is much longer.
I need a a formula that will count the number of times a word or phrase appears in a column of cells and assign a number
For example....
Big Red Ford Truck = 1
Ford Truck = 3
Red Ford Truck = 2
After i get the formula, I can sort by "greater than 2"