I use the following formula. It works except it returns "0" if the field is blank. What alternate formula can I use that will return blank instead of zero if the field is blank?
=IF(B3="","",IF(ISNA(VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)),IF(ISNA(VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),"",VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)))
I'm trying to get data from another tab, but only if it is greater than or less than a certain number. Here's what I'm using but doesn't seem to work.
=IF(ISNA(VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE)),">=22.00%",VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE))
A13 is targeting the name of the person
Aim MTD is the sheet tab the info is in
And I want to select the information only if the cell value is 22% or greater. If the cell value is less than 22%, I don't want it to read or to read zero. I'm not an excel expert (yet), but hope to be one day!
I'm trying to use this formula but I get the error "too many arguments". How can I do the same as the formula without an error:
=IF(ISNA(VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE)),VLOOKUP(B12,GYROLOKBR!A12:E2000,3,FALSE), VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE),VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE))
I added in the VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE) - when I used it without that it worked. But I have 3 sheets I need the the VLOOKUP to look over and this formula that I copied off another thread only had 2 tabs.
What i want to do is to look up of the value of home and away games seperatly. if there is no match for the lookup i get the "N/A" and if there is no value i get "0". If i get 0 the formula will calculate as a lost game.
View 10 Replies View RelatedI have the following vlookup working exactly as I want it to in excel: =IF(ISNA(VLOOKUP(LEFT(C2,10)& "*", NAME,2,FALSE)),"",(VLOOKUP(LEFT(C2,10)& "*",NAME,2,FALSE))) -NAME is a defined section on another worksheet
The problem I have is when I come to use this within a vba macro I'm writing the wildcard section automatically gets spaces added so it goes from "*" to " * " and excel doesn't like it! The code I'm using to write it into the cell is simply:
ActiveCell.FormulaR1C1 = _
"=IF(ISNA(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)),"",(VLOOKUP(LEFT(c2,10)& " * ",NAME,2,FALSE)))"
how to stop the spaces being added?
I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.
I have tried the following and variations based on what I know but they return errors.
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
Any better way of using I7 as the lookup value when K7 is blank.
=IF(ISBLANK(VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0)),"",VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0))
I've almost got what I need for a mind bending series of sorts that go from worksheet to worksheet. I need to add ISNA along with the ISBLANK above.
I realize there are a number of threads on this topic, and I've read through them but have been unable to apply those answers to this problem. I've attached a sample of the worksheet in question. The worksheet is supposed to tell me if messages are supported via a certain Network (BFX).
Column A is the result of a VLOOKUP function, which returns Yes or No if the entry is found, or #N/A if the entry is not found. Column B is my attempt to translate column A into strictly "Yes" and "No", converting an #N/A into a "No". For some reason, the ISNA( function I'm using doesn't seem to work, as highlighted in row 18.
I have 2 spreadsheets. Both have a list of part numbers on. Beside each part number i want a formula that tells me if the part number is present in both spreadsheets so its says TRUE. If its not present then FALSE. I've tried using this command but it doesn't seem to work properly =ISNA(MATCH(B2,A:A,TRUE))
I've attached the 2 spreadsheets. Spreadsheet1 is where i need the forumula placed beside the part numbers so if its present in Spreadsheet2 as well it displays TRUE beside the part number in Spreadsheet1.
It then places all the data on a new sheet. My problem is that some of the formula that the macro places on the new sheet come back with the result #N/A - which is fine, as they are the result of a lookup.
What I want to try and do, is at the end of the macro, get it to delete the row if the activecell is showing as #N/A
I've tried to write a small bit of code for it...
How to combine ISNA and ISBLANK in the below formula such that it returns empty cell if vlookup cell is blank.
HTML Code:
=IF(ISBLANK(VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0)),"",VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0))
Let me first explain what I tried to do, before getting to the mess I created. Maybe I should use another formula?
I wanted to compare the amounts in two files on the basis of the same product number. Thus search for a sheet and a column in another file for the same value of A6 (current file) and show the value of the same row in another column (of the other file). However, if there is no value I wanted it to display zero (0) or a text such as "False".
First I did a basic LOOKUP which should work?. However it still showed #N/A for cells without a reference value (A6 is THA) or target cells without a target value (€100.00). I tried to avoid this by combining the ISNA function. However, although the last value shown is correct, the ones before change and seem to add up, or refer to another cell?
Another issue I did not come to yet is the fact that I would like it to search for the correct sheet based on the first three letters of the reference (A6), preferably not case sensitive. A6 is Tha13, first three letters indicate sheet name Tha. Any suggestions on this? ...
Am trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.
Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)
I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:
http://www.excelforum.com/excel-prog...ant-lists.html
Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.
When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I'm taking a spreadsheet that I produce each month and creating a year to date spreadsheet in the same format. I'm using a vlookup to find the campaign name in each sheet and add up the totals. This works fine but sometimes a camapign ends and so the vlookup for that month will produce an #n/a value so will reduce the whole sum to #n/a.
The VLOOKUP + VLOOKUP + VLOOKUP I was using that produced an #n/a is shown below.
=VLOOKUP($A6,'[Margin by Site Net April 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net May 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)+VLOOKUP($A6,'[Margin by Site Net June 2008.xls]Brighton'!$A$5:$F$26,2,FALSE)
To get round it I've added in an IF statement combined with ISERROR as shown below. It works but is looking quite messy. Is there an easier way to do this ? (the formula below is from the cell below the one above so the look up value is one cell down)
I am trying to use Vlookup to find out the min and max sales of the products shown in the spreadsheet. I have used Vlookup before but only by itself and with 2 columns.
View 5 Replies View RelatedI am trying to create cell to calulate the total cost from a column is a pivot table. I thought i had done it but then realised that it doesn't account for dupliate suites that occur.
I thought that using VLOOKUP might work for this but not sure how to do it.
What I am looking for is to say (for pivot table sheet) if cloumn b contains arable then total cost =395, however if column b contains arable and forestry then total cost = 395, however if column b contains arable and urban then total cost = 420..... but for all possible cases.
At the moment if column b contains arable and forestry total cost = 520
Example:..............
I want column B to be populated with the details from Sheet1, Column B if A = A and if not found populate with the text "NO ID". However for valid results, I'm getting #REF! The formula I'm using is:
=IF(ISNA(VLOOKUP(A1,Sheet1!A:A,Sheet1!B:B,FALSE)),"No APW ID",VLOOKUP(A1,Sheet1!A:A,Sheet1!B:B,FALSE))
I'm assuming this is because the value of Column A is text and not a numerical value but am having a real blonde moment as to how I can solve this.
I added the roundup column because i thought that might be the problem.
=VLOOKUP(0.18,B4:C2819,2,FALSE) result=#N/A
A B C D
GP%roundup profit price
0.350.36 $635.00 $1,800.00
0.350.36 $630.00 $1,795.00
0.350.35 $625.00 $1,790.00
continues
0.190.19 $265.00 $1,430.00
0.180.19 $260.00 $1,425.00
0.180.18 $255.00 $1,420.00
0.180.18 $250.00 $1,415.00
0.170.18 $245.00 $1,410.00
0.170.18 $240.00 $1,405.00
im trying to created a worksheet that adds the number of days people are off in a year, i have come up with this formula as people can chage teams and therefore position in the worksheet,
View 4 Replies View RelatedHey experts.
I have a data source that I am trying pull data from as a roll up and I am having a difficult time with a solution.
I am basically trying to pull data directly below the cell of a VLOOKUP. Please see the attached.
This is just a small example of the actual data. The solution for the gross scores is very simple using VLOOKUP. However, I need assistance with the net scores. Hoping this makes sense once you see the file.
Thanks,
Mike
I have used Vlookup in a situation where the user selects the customer short code from a dropdown list and then it will display the customer address details in the 6 rows below the search area.
There can be 3 or 4 different contacts for each customer that I would like a dropdown list where the user can select the contacts just for that customer based on the vlookup criteria from above.
I tried assigning each customer a code, then making a new list of contacts, and naming the contacts based on the customer code, but got lost in what i was doing and not fully understanding what I was doing.