I have the below code that performs a Vlookup. What I need to do is enclose the value that has been looked up into single quotation marks, one at the beginning and one at the end.
Sub SourceVLook()
Dim LastRow As Long
Dim LookupRange As Range
[Code].....
I need VBA to remove all punctuation and spaces from cells. What I want is to do this from the same columns every spreadhseet that I open and when it gets to row 700 to stop. So I guess a range for this example could be A1:B700.
tell me which operator works in VBA the way the OR operator works in functions? I want to write an IF statement that will evaluate whether a variable is equal to any of the three punctuation marks ".", "?", or "!". But I'm not sure how to code it. I attempted the following:
View 2 Replies View RelatedI write a vb-code that searches through a specific range in my sheet for specific three letter combinations and multiplies the value in the cell directly to the left of the cell in which it finds the three letter combination by the cell address specified by me? In other words, let say it finds the letters ABC in A2, B5 and D9. In cells A1, B4 and D8 I have entered som code that retrieves information from the other program. I would like the macro to leave this code untouched, but add to it "*N1" (N1 being the cell where I have stored the value that ABC corresponds to).
I would also like to specify the range in which it searches so that it doesnt add this multiplication anywhere where it is not supposed to.
I have a straightforward VLOOKUP function which works fine until I put it into a macro. It then fails with an Error 1004 runtime message. The function looks at the contents of one cell, matches it against a particular cell in a separate worksheet and adjusts an adjacent cell accordingly.
View 7 Replies View RelatedI would like to use vlookup in a macro. I have a simple form in excel that looks up information in a database. I wrote a simple macro that copies that copies the information into another tab dropping down each time and then refilling the formulas to pull data back from the database.
I need to be able to have my macro lookup into the database and overwrite the original row based on the name.
How do I write a vlookup into a macro?
""Sheets("Fill Db").Select
Range("b2:bf2").Select
Selection.Copy
Here is where I would like it to lookup (vlookup) based on the name in b2 from the sheet above find it in the sheet below and then copy value the line. Sheets("Final Database").Select
Range("b2:b250").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False...........
I tried running the below VBA codes and received a Run-time error '424': Object required.
Sub 1
Dim i As Long
i = 1
'Do a vlookup between column a in test1 worksheet against column a:d range in test1source worksheet
[Code] .....
I am trying to do a vlookup within a macro.
However this always shows the first result in the first row but the rest of the rows just show #REF.
I want it to look up 100's or rows and shows either the result or N/A
Once I create the macro this is what the VBA is telling me: [Code] ......
I am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
View 2 Replies View RelatedI like to run Vlookup function in macro excel userform with combobox & listbox..
View 2 Replies View Relatedhow to add a vlookup to a longer macro I'm working on but I keep running into a variety of errors. I ended up creating a new Sub () to test out a very simple vlookup macro in the hopes of figuring out what's going on.
I went to this website VLOOKUP In VBA and copied exactly a sample code they provided there (only thing I changed was substituting in my own lookup value and range), but I'm still getting an "object required" error. Is there something wrong with the provided code, or do I have a setting off on my computer? I've tried to use vlookup in a macro several different ways but I keep getting assorted errors (including object required)
Code:
Sub Fustrated()
Dim E_name As String
E_name = "Lira"
Sal = Application.WorksheetFunction.VLookup(E_name, Admin.Range("AF3:AG12"), 2, False)
MsgBox "Number" And Sal
End Sub
I write quite a few macros that require a vlookup formula. The table array is often dynamic which means I must change my program. I am trying to find a way to create the formula to accomodate the growth of the table array. I can count the number of rows in the table by the counta function, but then when I try to use that variable in the formula it bombs.
View 7 Replies View RelatedI am doing a vlookup accross two sheets where I am adding up the first Vlookup with the second vlookup (ie vlookup sheet 1 + vlookup sheet2) and in one of the sheets the vlookup formula finds a value but in the other sheet it finds nothing. As such when the two formulas are added together it gives a value of #N/A. Since I have made a macro for this it is annoying.
The macro is as follows:
Sub Vlookup()
Dim rowc As Long
Dim i As Long
Application. ScreenUpdating = False
rowc = Application.WorksheetFunction. CountA( Range("a:a"))
For i = 2 To rowc
Cells(i, 3) = "=-VLOOKUP(RC[-2],Hksaldo!C[-2]:C[3],6,FALSE)+VLOOKUP(RC[-2],Likv!C[-2]:C[2],5,FALSE)"
Next i
End Sub
how I can get around this. Ie when I have a non applicable value i one of the Vlookup formula the formula should only look at the vlookup with a value?
why the macro "try()" in the attached workbook does not work?
I get the error message: "Unable to get the Vlookup property of the WorksheetFunction class"
Sub try()
Dim i%
For i = 1 To 35
Sheets("Sheet2").Select
myValue = Cells(i, 1).Value
Sheets("Sheet1").Select
n = WorksheetFunction.VLookup(myValue, "A1:A11", 1, True)
Sheets("Sheet2").Select
Cells(i, 2).Value = n
Next i
End Sub
convert this formula to VBA.
The are four formulas in there:
1. lookup formula.
2. remove the 1st number (exmaple: remove 0 in 0123 to become 123)
3. add a number (example: add 0 to 123 to become 0123)
4. convert a number into text format.
I've 2 excel files open. The first with my data, and a second with a huge range. I need to work with a macro that used vlookup to get a value from the second file in the first.
My code:
VB:
Sub mysub()
Dim i As Integer
Dim y As Integer
Dim match As String
Dim no_match As Integer
Dim rng As Range
'Set rng = Workbooks("wb2").Worksheets("Sheet1").Range("$A$1:$B$2704")
[Code] .....
I have a stock sheet of about 1500 items that is printed every 3 months for stock take.
The changes are then entered manually. I have set up a stock order sheet using VLookup and manually enter the items that need to be ordered. I'm wanting to know if i could use a macro to do this automatically and check only for the stock items that have changed (ie. items have been sold ). Stock levels needed on hand are usually constant but is changed from time to time so will have to be taken into consideration. I have included an example worksheet which would better explain what i have been doing so far. Also if possible could the macro generate a new worksheet for the order sheet and name it the corresponding date and month of generation.
I have a workbook with two sheets that I need to combine some of the data from. Sheet1 is a template to be used for translation purposes on Sheet2. I would like to put Sales Rep Info in column C on Sheet2 (has only Sales Rep ID) using Sheet1 as a translation table (shows Sales Rep ID and Sales Rep Info). I can do this with a vlookup function but would like to know how to do it in a macro so I can use on other more complex workbooks. Here is a sample data set.
View 3 Replies View RelatedI have 2 sheets, sheet2 have data consist of 5 columns I want to vlook up by vba code so the data from sheet2 with reference here is (ID) search in sheet1 and update the data from sheet 2 to sheet 1 like below. i have found a similar code but it updates only one column that is B cloumn i want to update C, D, E columns and rows by the below code. see the below code.
Sheet 2
Id, beginning, principal, interest, endbalance
123, 10000, 1000, 50 , 9000
789, 8000 , 400 , 150, 7600
245, 5000 , 1000, 200 , 4000
456, 4000 , 1000, 1000 , 3000
789, 2500 , 500 , 100 , 2000
Sheet1
id beginning principal interest endbalance
123 10000
789 8000
245 5000
456 4000
786 2500
Ifound below code suitable for the above query but this is only execute column b , I want to execute c, d, e columns how can I do this.
Sub ADDCLM()
On Error Resume Next
Dim Dept_Row As Long
[Code]....
one part requires a pivot table to split two seperate pieces of data. the macro is running fine until this point when i get the AddFields method error (run time 1004). the Visual Basic error is as follows:
ActiveSheet.PivotTables("PivotTable1").AddFields RowFields:="Employee", _
ColumnFields:="Int.Ext"
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Lab Hrs")
.Orientation = xlDataField
.Caption = "Sum of Lab Hrs"
.Function = xlSum
End With
ActiveWorkbook.ShowPivotTableFieldList = False
ActiveWindow.SmallScroll Down:=-6
Sheets("FINISHED WORKSHEET").Select
ActiveWindow.SmallScroll ToRight:=4
Range("AA1").Select
ActiveCell.FormulaR1C1 = "Int Lab Hrs"
Range("AA2").Select
ActiveCell.FormulaR1C1 = "=VLOOKUP(RC[-25],Sheet1!C[-26]:C[-24],3,FALSE)"
Range("AA2").Select
is this basically a write off or can anything be salvaged to make it run correctly. the pivot table will always use the same columns etc. every month it is run.
I'm trying to Access data from an XL file without actually opening the file. In an XL spreadsheet I type in a cell: =VLOOKUP("A", 'C:[Book2.xls]Sheet1'!$A$1:$B$10,1) and get an answer without a problem. In VBA, I try the line of
Current = Application.VLookup("A", Range("'C:[Book2.xls]Sheet1'!$A$1:$B$10"), 1)
and get an error that says Method 'Range' of object '_Global' failed
I am writing a macro for people at work to use to automatically vlook-up data from another spreadsheet.
I wanted to base it along the use of a msgbox as they are not the most tech-savy people.
I want the msgbox dialogue to go something like this -
Which spreadsheet do you want to pull in data from?
The user browses to the file they want
Which columns do you want to transfer?
The user types in the columns
Which columns do you want them pasted to (in new sheet)?
The user types in the columns they want to paste to
and then macro does the vlook-up.
I wanna have a Vlookup Macro function in my spreadsheet. I perform a vlookup in the spreadsheet by using vlookup formula and I found out that it is waste of time to retrieve records from other file when I have a total of 55000 records in one spreadsheet. I plan to use macro functions to retrieve records instead of using vlookup formula. So is there any chance that I can create the macro based on my scenario? {i already attached my spreadsheet here, it is a dump data}
In the sample1.xls, I want to retrieve the records from the sample2.xls by using Material as the key field. When I run the Vlookup Macro, the system is able to help me lookup the value such as (Net Sales: January until Net Sales: March) and display the records in the sample1.xls based on the Material Key Field. So hope that my problems can be solve here.
Is it possible to Call the inbuilt Excel Functions (like VLOOKUP) in Macros. we have to pouplate cells with formula which uses VLOOKUP. one way was to update each cell with required Formula like: [code] Range("A1").value = " = 6*F7*(1-Vlookup(lookupvalue........))"[code] but this was stupid as no of cell to be populated was large and variable and moreover it will return formulae to cells rather than fixed value. What we tried was to defile an table_array as Array(x y) and then use this array to return required VLOOKUP value. However I was thinking is there any way to call function like VLOOKUP in Macros so that we can return a value to cell rather than formula.
View 3 Replies View RelatedI'm trying to look up a value in Analytics Data searchin for the date in B9 to B & rader.
I get error messages, because i can't find the dates. But I'm sure I have defined the ranges correct. The code works in another workbook with the difference that the table with the variables I'm trying to lookup are in the same sheet as the where I want to place them.
Private Sub Upd1_Click()
Dim rader As Double
Dim lookrng As range
Dim updvalue0 As Double
Dim updvalue1 As Double
Dim updvalue2 As Double
Dim updvalue3 As Double
Dim updvalue4 As Double
Dim updvalue5 As Double .........
I need a User Defined Function (UDF) to Vlookup duplicate values in separate Columns.
I can't use an Array function as the data is huge and it takes lot of time to calculate.
I have attached a Input and the desired output in the file attached.
UDF_MACRO.xlsx
The following code shows the result/formula that is generated in a particular cell when I run Macro2:
View 2 Replies View RelatedI am attempting to create a macro that will carry out vlookup for each row in a data set
For simplicity testing this on a sheet where A1:A10 contains data 1 to 10, and B1:B10 contains a to j, and putting the result of the vlookup into column E.
The code I have written is:
[Code] .......
When I attempt to run this I receive an error message that says, "Unable to get the VLookup property of the WorksheetFunction class."
What do I need to change?
I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.
I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.
I used VLookup function in macro. Lookup value is a variable name. I don't know how to use variable name inside of VLOOKUP function.
Use VLOOKUP function in macro with Variable Name for Lookup value
Function CC(CName As String)
ActiveCell.FormulaR1C1 = "=VLOOKUP(cname,'[Structure File.xlsx]Sheet1'!C1:C3,2,FALSE)"
End Function
How to use CName variable inside of Vlookup function.