I write a vb-code that searches through a specific range in my sheet for specific three letter combinations and multiplies the value in the cell directly to the left of the cell in which it finds the three letter combination by the cell address specified by me? In other words, let say it finds the letters ABC in A2, B5 and D9. In cells A1, B4 and D8 I have entered som code that retrieves information from the other program. I would like the macro to leave this code untouched, but add to it "*N1" (N1 being the cell where I have stored the value that ABC corresponds to).
I would also like to specify the range in which it searches so that it doesnt add this multiplication anywhere where it is not supposed to.
I have a straightforward VLOOKUP function which works fine until I put it into a macro. It then fails with an Error 1004 runtime message. The function looks at the contents of one cell, matches it against a particular cell in a separate worksheet and adjusts an adjacent cell accordingly.
I would like to use vlookup in a macro. I have a simple form in excel that looks up information in a database. I wrote a simple macro that copies that copies the information into another tab dropping down each time and then refilling the formulas to pull data back from the database.
I need to be able to have my macro lookup into the database and overwrite the original row based on the name.
How do I write a vlookup into a macro?
""Sheets("Fill Db").Select Range("b2:bf2").Select Selection.Copy Here is where I would like it to lookup (vlookup) based on the name in b2 from the sheet above find it in the sheet below and then copy value the line. Sheets("Final Database").Select Range("b2:b250").Select Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:=False, Transpose:=False...........
I am trying to use the Vlookup function in a macro but I can't figure out how to write it. I am using a controlled loop to cycle through my data. So for the first entry, my lookup data is in cell A2. The lookup table is located in a sheet called 'Trade Table' and the lookup field is in Column B and value needed is in column C. The results go in column G. The excel formula is as follows:
how to add a vlookup to a longer macro I'm working on but I keep running into a variety of errors. I ended up creating a new Sub () to test out a very simple vlookup macro in the hopes of figuring out what's going on.
I went to this website VLOOKUP In VBA and copied exactly a sample code they provided there (only thing I changed was substituting in my own lookup value and range), but I'm still getting an "object required" error. Is there something wrong with the provided code, or do I have a setting off on my computer? I've tried to use vlookup in a macro several different ways but I keep getting assorted errors (including object required)
Code:
Sub Fustrated() Dim E_name As String E_name = "Lira" Sal = Application.WorksheetFunction.VLookup(E_name, Admin.Range("AF3:AG12"), 2, False) MsgBox "Number" And Sal End Sub
I have the below code that performs a Vlookup. What I need to do is enclose the value that has been looked up into single quotation marks, one at the beginning and one at the end.
Sub SourceVLook() Dim LastRow As Long Dim LookupRange As Range
I write quite a few macros that require a vlookup formula. The table array is often dynamic which means I must change my program. I am trying to find a way to create the formula to accomodate the growth of the table array. I can count the number of rows in the table by the counta function, but then when I try to use that variable in the formula it bombs.
I am doing a vlookup accross two sheets where I am adding up the first Vlookup with the second vlookup (ie vlookup sheet 1 + vlookup sheet2) and in one of the sheets the vlookup formula finds a value but in the other sheet it finds nothing. As such when the two formulas are added together it gives a value of #N/A. Since I have made a macro for this it is annoying.
The macro is as follows:
Sub Vlookup() Dim rowc As Long Dim i As Long
Application. ScreenUpdating = False
rowc = Application.WorksheetFunction. CountA( Range("a:a")) For i = 2 To rowc Cells(i, 3) = "=-VLOOKUP(RC[-2],Hksaldo!C[-2]:C[3],6,FALSE)+VLOOKUP(RC[-2],Likv!C[-2]:C[2],5,FALSE)" Next i
End Sub
how I can get around this. Ie when I have a non applicable value i one of the Vlookup formula the formula should only look at the vlookup with a value?
why the macro "try()" in the attached workbook does not work?
I get the error message: "Unable to get the Vlookup property of the WorksheetFunction class"
Sub try() Dim i% For i = 1 To 35 Sheets("Sheet2").Select myValue = Cells(i, 1).Value Sheets("Sheet1").Select n = WorksheetFunction.VLookup(myValue, "A1:A11", 1, True) Sheets("Sheet2").Select Cells(i, 2).Value = n Next i End Sub
I've 2 excel files open. The first with my data, and a second with a huge range. I need to work with a macro that used vlookup to get a value from the second file in the first.
My code:
VB: Sub mysub()
Dim i As Integer Dim y As Integer Dim match As String Dim no_match As Integer Dim rng As Range 'Set rng = Workbooks("wb2").Worksheets("Sheet1").Range("$A$1:$B$2704")
I have a stock sheet of about 1500 items that is printed every 3 months for stock take.
The changes are then entered manually. I have set up a stock order sheet using VLookup and manually enter the items that need to be ordered. I'm wanting to know if i could use a macro to do this automatically and check only for the stock items that have changed (ie. items have been sold ). Stock levels needed on hand are usually constant but is changed from time to time so will have to be taken into consideration. I have included an example worksheet which would better explain what i have been doing so far. Also if possible could the macro generate a new worksheet for the order sheet and name it the corresponding date and month of generation.
I have a workbook with two sheets that I need to combine some of the data from. Sheet1 is a template to be used for translation purposes on Sheet2. I would like to put Sales Rep Info in column C on Sheet2 (has only Sales Rep ID) using Sheet1 as a translation table (shows Sales Rep ID and Sales Rep Info). I can do this with a vlookup function but would like to know how to do it in a macro so I can use on other more complex workbooks. Here is a sample data set.
I have 2 sheets, sheet2 have data consist of 5 columns I want to vlook up by vba code so the data from sheet2 with reference here is (ID) search in sheet1 and update the data from sheet 2 to sheet 1 like below. i have found a similar code but it updates only one column that is B cloumn i want to update C, D, E columns and rows by the below code. see the below code.
one part requires a pivot table to split two seperate pieces of data. the macro is running fine until this point when i get the AddFields method error (run time 1004). the Visual Basic error is as follows:
is this basically a write off or can anything be salvaged to make it run correctly. the pivot table will always use the same columns etc. every month it is run.
I'm trying to Access data from an XL file without actually opening the file. In an XL spreadsheet I type in a cell: =VLOOKUP("A", 'C:[Book2.xls]Sheet1'!$A$1:$B$10,1) and get an answer without a problem. In VBA, I try the line of
Current = Application.VLookup("A", Range("'C:[Book2.xls]Sheet1'!$A$1:$B$10"), 1)
and get an error that says Method 'Range' of object '_Global' failed
I wanna have a Vlookup Macro function in my spreadsheet. I perform a vlookup in the spreadsheet by using vlookup formula and I found out that it is waste of time to retrieve records from other file when I have a total of 55000 records in one spreadsheet. I plan to use macro functions to retrieve records instead of using vlookup formula. So is there any chance that I can create the macro based on my scenario? {i already attached my spreadsheet here, it is a dump data}
In the sample1.xls, I want to retrieve the records from the sample2.xls by using Material as the key field. When I run the Vlookup Macro, the system is able to help me lookup the value such as (Net Sales: January until Net Sales: March) and display the records in the sample1.xls based on the Material Key Field. So hope that my problems can be solve here.
Is it possible to Call the inbuilt Excel Functions (like VLOOKUP) in Macros. we have to pouplate cells with formula which uses VLOOKUP. one way was to update each cell with required Formula like: [code] Range("A1").value = " = 6*F7*(1-Vlookup(lookupvalue........))"[code] but this was stupid as no of cell to be populated was large and variable and moreover it will return formulae to cells rather than fixed value. What we tried was to defile an table_array as Array(x y) and then use this array to return required VLOOKUP value. However I was thinking is there any way to call function like VLOOKUP in Macros so that we can return a value to cell rather than formula.
I'm trying to look up a value in Analytics Data searchin for the date in B9 to B & rader.
I get error messages, because i can't find the dates. But I'm sure I have defined the ranges correct. The code works in another workbook with the difference that the table with the variables I'm trying to lookup are in the same sheet as the where I want to place them.
Private Sub Upd1_Click() Dim rader As Double
Dim lookrng As range Dim updvalue0 As Double Dim updvalue1 As Double Dim updvalue2 As Double Dim updvalue3 As Double Dim updvalue4 As Double Dim updvalue5 As Double .........
I am attempting to create a macro that will carry out vlookup for each row in a data set
For simplicity testing this on a sheet where A1:A10 contains data 1 to 10, and B1:B10 contains a to j, and putting the result of the vlookup into column E.
The code I have written is:
[Code] .......
When I attempt to run this I receive an error message that says, "Unable to get the VLookup property of the WorksheetFunction class."
I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.
I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.
I have a vlookup table with will define the Job description based on the job number & cost code. The function is working fine but the problem come when i try to convert it into macro.
I have created a macro to open a workbook from another workbook and do a vlookup against the data in the source workbook. I then wanted to highlight the cells in the in the workbook that I'm doing the vlookup from, and to unhighlight any empty cells. I did this all without code using the macro recorder so that I could then study the code and learn something.
