I want to extract particular label from the text file named 'Branch : xxx" i what to extract the xxx from the text file and save it as worksheet name, is that possible through a macro? Then if required i will import the text file through the recorded macro.
View 1 RepliesI had VBA run a third-party program ("HYD") using data listed in my spreadsheet. HYD produces a textfile and I want to extract a number from that log (line 58, columns 6-10 to be exact).
I started with
Open "C:TempHYDLOG.TXT" For Input As #1
but I don't know how to have it skip down to line 58 or which function to use to extract the number I want. I've read through tons of help files and forums but none of them treat anything as simple as scrolling down to specific lines.
The entire subroutine up to that point is as follows: ....
My data looks like this - it's a text file that I import into Excel.
What I'm looking for is operations that require welding, as indicated by the "Weld:" in Row 61. If it is a weld operation, I want to know the time (121.705) and the Operator involved (Opr 2 - Row 64).
I'm simply using an IF statement in a loop to extract these specific cells:
Range("N2").Select
Do
ActiveCell.FormulaR1C1 = "=IF(MID(RC[-13],11,5)=""Weld:"",LEFT(RC[-13],3),"""")"
ActiveCell.Offset(1, 0).Select
Loop Until IsEmpty(ActiveCell.Offset(0, -13))
Because I don't know how to write "real" code, it does a similar loop 5 times. Once to pull the sequence number (the first number), then the time, then I have 3 separate columns looking for Operator 1, 2 or 3, respectively. Once those 5 loops are complete there is a pivot table that summarizes the sequences for each operator.
It works fine, but it's slow. Some of the text files have 10,000 lines in them.
I need a macro created, which extracts data from the text file, and displays the low level detail which is on the text file.
I have created a sample of the desired results on a tab called "Low Level Results".
I have already created a macro already which extracts data from the text file, but this gives me a high level view and the results of this is on the tab "High Level Results" ( which you might be able to adapt)
Please find attached two files,
Text File,
And Excel spreadsheet
I need to extract lines in a huge text file (more than 300,000 records ) based on one condition. for e.g.
02/03/07 123456789 hsjksk sjdlsl
05/03/07 323453789 hsjksk sjdlsl
04/03/07 123456789 hsjksk sjdlsl
02/03/07 123456789 hsjksk sjdlsl
I need extract of lines where the date and the digits are the same. in above example it should extract only record line 1 and record line 4. Some body advised me to try MSAccess , but I have never used MS Access and have no clue about it , hence i don't want to use it. Is there a way in VBA to code this ?
I have a text file (EP-User.txt) contains records of User information like the example below:
[User]
org_id=HR
uid=JohnChen
role=employee
email_address=John@etex.com
first_name=John
last_name=Chen
job_title=Manager
country=USA
language=EN
time_zone=GMT-8
street=3
city=MX
state=NY
zip=123456
telephone=09847684
fax=23469483.....................
The fields of each User record may not appear in sequence and some of the fields may not appear in other User record. The file contains thousands of User records.
1. I need to extract the User records (only certain fields) into excel for data analysis and manipulation (fill-in missing value in certain fields).
2. After analysis and manipulation in excel, I need to export the data back to the original text file format again.
I am looking to import data in text file to Excel sheet. Here is the main catch - All the data are not of fixed length and are in multiple lines as in the example below.
Text File:
ID001 Dr Dang 01012011 Male
USA Married 123
Below is how I expected the data extraction in Excel:
ColumnA ColumnB
CardID ID001
Name Dr Dang
DOB 01012011
Sex Male
Country USA
Status Married
Pin 123
I have been trying to work this out by looking at other posts (mostly concerning Binary Access) but can't figure it! The source text files I am using can vary in length from 4,000 characters to well over 100,000 characters. However the data I am looking for always starts 40 characters from the end of the file and is 10 characters long! I need my macro to pick out this data and store it as a string (so it can be added to an array and exported to a worksheet later)
View 2 Replies View Relatedprovide me a code for extracting data and outputting it into individual worksheets situated within the excel workbook file. I am wondering what the code would be if the data were extracted to individual text files, individual workbooks or *.prn files?
For i = 2 To Cells(Rows.Count, 1).End(xlUp).Row
Set ws = Worksheets.Add(After:=Worksheets(Worksheets.Count))
ws.Name = wsraw.Cells(i, "D")
With ws
.Range("A1") = wsraw.Cells(i, "D")
.Range("A2").Resize(2) = wsraw.Cells(i, "A")
.Range("B2").Resize(2) = wsraw.Cells(i, "B")
.Range("C2") = 0
.Range("C3") = 1000
.Range("A4") = -999
End With
Next
The code below looks at file names in column A and then goes to a folder and opens and copies the data in range c2 -lastrow from each file and pastes the data into sheet2.
how I could add to the code so that it also inserts the file name in column c?
It would make it easier to track the data in column B.
VB:
Sub CopyFromFile()
Dim fPath As String
Dim lRow As Long
[Code].....
I have attached a sample workbook. The list of file name is in sheet 1. An example of the output is in sheet 2. The data in column A is dummy data generally spans 100's of rows not just 10 as in the example.
The purpose of the code is to be able to put a list of file names in column a in sheet 1 and extract data from those files in a folder. The data extraction works fine. The reson for adding the file names is so that I know what file the data came from.
I have a textbox with a label & he will type in his name in the textbox & it appears on the label. Is there any way to put the word "Hi" on the label & then have his name appear after "Hi" on the label. I can do it using 2 labels side by side but I would like to have it all on 1 label
View 3 Replies View RelatedI need to set up an automated process to open an existing .xls file, extract the data from specific cells located in that file and insert it into a totally different file that I have preformatted to accept this data.
Example scenario:
If I have "that_file.xls" and it is unopened, but it contains data in cells "A2 thru F2" that I need to extract... then I have "this_file.xls" , which is open, and set up with all my calculation cells and a specific layout (lets say it has cells "D8, E9, F10, G11, H12, and I13"). I want to be able to add a button to "this_file.xls" to run a macro that would open a file search window where I can select "that_file.xls", and then it will automatically extract the data from "that_file.xls" into "this_file.xls" as follows:
A2 to D8
B2 to E9
C2 to F10
D2 to G11
E2 to H12
F2 to I13
I'm using the code below to create a pie chart and the code works fine.
[Code] .....
However, I now would like to change this so that I can add the word "FTE" at end of this part of code which creates the 'Value' data label.
[Code] ....
I have two userforms with a label which displays CompetitorID. I want to transfer content (displayvalue) from UF1.label to UF2.Label. I know labels don't have a value property but want to simply know if it can be done as presently I'm getting run time error 380, can't set property value.
VB : HeadEntryForm.lbCompID = Me.lbCompID ' trf selected competitor ID to ID field on HeadEntryForm
I have a spreadsheet with a customers information and various parts we make for them. I need to be able to take this information and incorporate it into a label format. I need something quick and easy as there can be 150 parts per customer
Customer: ABCD
Customer PO: 12345
Part Number Quantity
AB 1
** 15
EF 22
GH 14
and I need it to output:
CUST: ABCD PART: AB
PO: 12345 QTY: 1
CUST: ABCD PART: **
PO: 12345 QTY: 15
CUST: ABCD PART: EF
PO: 12345 QTY: 22
CUST: ABCD PART: GH
PO: 12345 QTY: 14
Is there a way to change the text on a label in a form with macros. Im going to be updating some values (Years) and want these to change automatically.
View 2 Replies View RelatedI have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
I have a simple line chart but I want to add an text description to each of the points. The data is driven by a pivot table so the text needed may change based on the drop down options.
If I was using the below data I would want the line graph drawn using the date and value, but the data label at each point to state the description.
Date Value Description
01/01/2010 90% Text A
01/02/2010 80% Text B
I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
I have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.
'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary
frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value
The labels are not changing their values.
I used a label from the forms toolbar and can't seem to change the color of the text.
View 5 Replies View RelatedIs it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedHow do I name my data series in a chart so that the name consist of both a cellreference and my own text?
Example: "Name" & Sheet1!A1. If the value in A1 is 2 then the series name shold be Name2
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I have a label control whose caption is set from text from a work sheet
How can I set the text of the caption to bold
Got a slight problem; I am making a "worker-plan", where you should be able to write a name on one file and have it updated (removed) from the equivalent columns on another file automatically. Here's an example with two separate projects:
Project 1 before and after changes:
Attachment 257366
Attachment 257367
Project 2 before and after changes:
Attachment 257368
Attachment 257369
You can see here how I intended it to work. When one worker is moved from Project 1 to Project 2, that worker should also be removed from those weeks in Project 1. The previous worker from Project 2 should also be removed from those weeks (in Project 2).
Are there any formulas that can make this work automatically? All week numbers will belong to the same columns in all files.
Edit: There are 30 files that should be syncronized, not just two.. I could also gather all files into one file with sheets, instead of having seperate files.
I created a userform where if a value from cell x is true then the label caption changes to value in cell z. While everything works fine, the label caption does not seem to appear in my userform until i click on the label. Is there anyway that it can appear automatically once the userform opens?
Also example of my code is:
Private Sub EventDateResult_Click ()
If Range("A5") = "1" Then
Me.EventDateResult.Caption = Range("N4")
End If
End Sub
I have a set of task descriptions that I am attempting to trend on. Some of these (Column B) have the customer's name added to the description; others do not. I need to be able to make a list of task names (ColumnA), removing the name from the text string.
The formula I am using is [=LEFT(B3,FIND("for",B3)-2)].
The problem I am having is when the description does not contain the "for" built into the formula, I get "VALUE" error. What adjustment can I make to the formula to pull over the Description if the "for" does not appear in the text string?
An original text string entry appearing in an Excel cell would be:
"N7C Neuroprotective J5Z Antiviral, other M2Z Antiarthritic, other J5A Antiviral, anti-HIV"
I need to extract N7C, J5Z, M2Z and J5A from this string and list these alphanumeric values in separate cells adjacent to the original text string. The challenge is that these alphanumeric references may appear in different positions within the original string with no fixed value e.g. a "," separating them. The alphanumeric references may also be 3 or 4 characters in length and there may be different numbers of alphanumeric references in the original string.
Another example would be (very different from the first):
"T2Z Recombinant, other K5B Radio-chemoprotective J3Z Antibacterial, other D3A Vulnerary A10C Symptomatic antidiabetic K6Z Anticancer, other R8A Antiasthma B6A Septic shock treatment I1Z Immunostimulant, other S1Z Ophthalmological R8B Antiallergic, non-asthma M1A1 Anti-inflammatory"
You can see that in this further example "A10C" & "M1A1" are 4 character alphanumeric strings wheras the others feature 3 characters.
I'm working for a local authority who have been given a mass of survey data. In this particular task, residents of each small district within our area have been asked their levels of satisfaction with a service, and how important they think that service is. I want to plot these two values against each other using a scatterplot, and label each service.
Excel does not automatically allow this so I used a very good sheet from the forums here: Attach labels with names to the points in a scatter plot. It's the top file, and works well. However, I can't seem to customise it for my own data.
Problems include:
- Excel often freezing when I try to run it
- Not all the data being picked up for the chart
- Incorrect labels being picked up..........