I am using a formula =SUMIF(B:B,B1,C:C) in an effort to return the total of those cells in column C where the value of B1 remains the same in column B. (did that make sense?). I've used a similar formula previously but on this occasion it returns an incorrect total.
View 2 Repliesi've got a sample database (attached) with a userform for inputting of data. What i want it to do is automatically generate the next number and add it to textbox "our ref" on the userform. the number is in Col C. This is the code i've tried using the code highlighted in red which doesnt work.
View 12 Replies View RelatedI have about 5000 rows of data and I need to add the same letters (.jpg) the the end of all the data in a column.
View 4 Replies View RelatedI have an excel file with some data in it. I have two columns with one of four words in it. For simplicity I'll call them RED, GREEN, BLUE, and Yellow. A few columns over I have columns "Same" "Good" and "Bad". I'm trying to figure out a way to get excel to put a 1 in the appropriate column, if cell A1 is Red I need excel to look at the word in cell B2 and put a 1 in the "same" column if A1 and B1 are the same word. If the word in B2 is Yellow I need excel to put a 1 in the "Good" column. If the word in B1 is GREEN or BLUE I need it to put a 1 in the bad column. The tricky part is each of the four words RED, GREEN, BLUE, and Yellow have a different set of words that will be called "good" or "bad". So if the word in cell A1 if Green for example it will have a different set of good and bad color words.
So it seems I need four different functions depending on what word is in A1. In the column next to these lists of words I have the date which I'll need to use to give me the sums of same, good, and bad for each day. But first things first. I think I need to use a combination of IF functions and MATCH function, but I can't figure out anything that works. Below is what I'm hoping it will look like when I've got the right formulas.
First column
Second column
Date
Same
Good
Bad
[Code]....
i have data stored like:
col1
XXXX1244 50
XXXX1519 60
XXXX1244 50
xxxxx1111 10
xxxxx1519 65
the last 4 caracters are numbers. I need to test these numbers and sum the corresponding values them in a single cell without adding new column(SUMIF like).
so in the above example I need to sum all ending at 1244 or 1519, therefore the sum showed in the single cell equals 225
to extract from a single cell: =VALUE(RIGHT(D8;4))
I tried to use an array formula but it seems to crash if a blank cell is in the array
i have a list of numbers in a column, and i have sorted it smallest to largest, now i wish to identify which ones are consecutive in the column.
5184730512
5184730547
5184730763
5184730766
5184730767
5184730836
5184731135
5184731136
5184731149
5184731212
5184731222
5184731389
I have a column of times: e.g. 10:03:00 and I would like to add them all up.
=A1+A2 works fine.
=sum(A1:A10) does not.
I have 2 Columns. One column represents calendar dates and the other column represents numbers between 0 and 7.
Therea re 10000 rows in this table.
I would like to count how many consecutive days I observe certain numbers numbers ( i.e 3+, 4+, 5+, etc)
See attachment : totals.xlsx‎
I'm trying to get a total sum of row 3 only when there is a "1" in each days of the week in the corresponding decimal point in row 2.
Looking at the entire Row 3, cell J3 and R3 have a "1" in consecutive cells so it should be counted as one value (0.25). The same is with cell S3 (0.50), AA3 (0.50) and AI3(0.50) so it should only be counted as one value (0.50). The Consecutive Occurrences cell AP3, should sum up all of the consecutive values, in this case it would be 0.75.
Please note, the colors will not be there, they are only in this example to show the consecutive values.
How can I automatically average consecutive data (4 rows) in a column and jump to the next 4 rows...until the end of my column?
View 4 Replies View RelatedI'm experimenting with a For Loop, and I don't know how to "tell it when to stop at the end of the column", because the columns have an empty row and then more data.. then an empty row and more data etc So the end of the column would be where there are two empty rows.
Code:
Sub eighteenrowsdown()
'
' eighteenrowsdown Macro
'
'
Dim rng As Range
Set rng = Sheets("Sheet3").Range("I3", "AE3")
Dim i As Integer
[Code]...
I know the code is bad but as long as I can get it to stop at the end of the column I'll be happy
Need a formula to automatically comment a cell when rows with given number consecutive columns has same entry example:
A B C D E F G H
1 0 0 0 0 5 6 7 18
2 0 0 5 6 7 0 8 26
3 0 5 0 0 0 0 0 5
row 1: there are minimum 4 '0' in consecutive columns, so H1 is sum of A1:G1 = 18 and automatically comment cell H1 "there are 4 zero" row 2: because there are no 4 '0' in consecutive columns, H2 is 26 , and no comment row 3: there are 5 '0' in consecutive columns, so H3 is 5 and automatically commented cell H3 "there are 5 zero"
My goal is to look at a column of numbers and count the number of consecutive cells that are positive (or negative), while ignoring blank cells that may be in between them. Using the first formula on this thread. http://www.excelforum.com/excel-gene...-than-0-a.html
I was able to adapt it to my own data, but whenever I had blank cells in my data the results were not reliable. the formula i am using now is =IF(COUNT(1/((A1:A27<0)*(A2:A28<0))),MAX(FREQUENCY(IF((A1:A27<0)*(A2:A28<0),ROW(A2:A28)),IF((A1:A27<0)*(A2:A28>= 0),ROW(A1:A27))))+1,0). for a bunch of data in column A. With limited knowledge of excel I'm not exactly sure how this formula works, so I'm not sure how to tell it to ignore all blank cells. I attached an example that shows how it fails with the blank cells
I have an Excel worksheet (ver.2003) containing data more than 5000 rows. I need to run a macro everyday to do copy a value for that cell each day from another cell in different respective rows :
Using # as a marker in a specific col (say col X2, X14, X27, X43 and so on ) I want to copy value from another cell (AE2, AE14, AE27, AE43 and so on) containing a forumla and paste as a value to a cell say B4 in a row of fixed range (say B4:V4, B16:V16 and so on), which is two rows below the marker. The value to be copied is located in the 7th cell (say AE2) to the right of the marker cell (X2). If first cell is blank (say B4) then I copy data into the first cell. Every time I run the macro the value should be copied to next blank cell in that row (C4, D4 and so on).
I need to run the macro everyday for a specified no. of days say 21 working days in a month, which is the length of the range) copy the value for each in different rows as explained above. What is the VB Excel macro for this? ...
What I am trying to is to count the number of times a certain number or character appears (either on its own or in a batch of consecutive cells containing that number/character) in a column.An example might clarify things (for reasons of brevity I will write the columns in rows):
If a column looks like (each 1-digit numbers / characters being a consecutive cell) 0 0 X X 0 0 X and I am counting for X, then I should get 2. If my column is X X 0 X X 0 X 0 0, then I should get 3. If my column is 0 X X 0 0 X 0 then I should get 2. If my column is X X 0 X X 0 X then I should get 3. Is there a formula to perform that calculation?
Using a Dynamic Named Range "Data", I would like a Formula to return the Row
Number of the "LAST" instance of a duplicate numeric value - repeating twice
consecutively in the same column.
I am looking for a better way to determine if a column of values contains a sequence of consecutive matches. For example, column A contains single words. To determine if three consecutive cells contain the word "neuron", I enter in cell B3 the formula:
=IF(AND(A3="neuron",A3=A2,A3=A1),1,"")
And copy down. I then test column B to see if there are any non-blank cells.
If we want to change the word or the number of consecutive occurrences, I have to re-edit all the formulas in column B. I want to eliminate the helper column. I would like to put the word in B1, the number of consecutive occurrences in B2 and have a formula in B3 that will return either True or False.
I can do this with a UDF, but the user has rejected this option.
I am trying to add numbers from cells if it IsNumeric and for some reason in column K the macro doesnt recognize numbers after row 14?
The range column is "E4:E"
Search criteria is the letter "R" in column "E" Then using OffSet, I go thru other columns and process data. Most of the macro works except for column K after row 14?
B+N Total sheet is where the data is and the decider is Column 'AF' which is already formulated and has 2 options: 'MMS' or 'Retail'.
I'm trying to write a code which needs to do:
If B+N Total sheet's AF Column has 'MMS' then copy that row and paste it into ADI MMS consecutively.
Just like the example attached Row 2,3,5 is MMS and not row 4. So I'm trying to get those rows in periodical order as Row 2,3,4 into ADI MMS Sheet.
How would I write a sumif function to only add consecutive cells that match the criteria? Here is the formula I am using right now, but it adds all of the cells that match the criteria, not just the consecutive ones. Also they need to be consecutive cells from the current cell (in the formula below i would be referring to A80)
=IF(A81<>A80,SUMIF(A$5:A80,A80,H$5:H80),"")
More data:
Column A is a group of dates, but not in order, they are slightly mixed up
Column H is a monetary value.
Is there a formula that would search for rows, or cells withing a row, that contain information and populate consecutive numbers in an adjacent column. For example if I am working with rows 1-4... F1 and F4 has information populated, while F2 and F3 are blank. I would like for the formula to populate E1 with the number 1 and E4 with the number 2. So the formula should decipher that F2 and F3 are blank therefore ignore these rows in the consecutive number scheme for column E. I would like for the formula to be scalable to any number of rows
View 8 Replies View RelatedNeed a formula for counting how many consecutive cells where the value is gretaer than or equal to +1
For example 1,
J18 = 7
K18 = 9
L18 = 3
M18 = 2
N18 = 8
O18 = 1
P18 = 8
Q18 = -17
In the above example the result would be 7
Example 2:
J12 = -22
K12 = 9
L12 = 4
In the above example the result would be 0 since the 1st value was -22
I have a range of say B1:Z2. In row B1:Z1 I have dates in the format dd-mmm-yy. In row B2:Z2 I indicate presence of a person by "P". This is at infrequent appearance i.e. p,p,p,blank,blank,blank,p,p,p,p,p,blank,blank,p,p,blank,p,p,p, etc. I am trying to find or workout a formula that would find the most repetitive Ps in row B2:Z2 and give me the sum thereof. I.e, from the above example it should be 5. It does not have to count specifically P. Something that counts the most non-blank sequence of cells in the range should also do.
View 8 Replies View Related how to display Sparkline from non-consecutive cells.
I want to display it from two apart ranges: A1:C1 and F1: J1
If it can't be done within the worksheet - is there a VBA code to workaround - such as filling-in an Array from the non-consecutive and using that Array as the Sparkline source ?
I’m trying to figure out how to show the highest occurrence of text in 10 cells which are not next to each other. Some of the cells will also be blank And the other thing is if there is a draw e.g. 5 2Z and 5 1Z I'd like it to show that, either with a word e.g. "DRAW" or anything really other than just putting whichever of the 2 "notes" in it feels like
Attached is a spreadsheet (all other data deleted) that shows what I am wanting to do – I have typed the results I am after directly in to the cells in columns BE & BF – BE will need some kind of countif, but when I try that is says I have too many arguments! I have to leave the columns in between blank in this case as they have other info in them, which is really annoying as if those 10 cells were contiguous then the formula
Say the Range is (D3:M3) there is data in D3,F3,J3,K3,L3, and M3. I want to count consecutive cells with data from M3 backwards to D3. In this scenario the sum would be 4.
View 7 Replies View RelatedI have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
I'm trying to create a formula (in Sheet 1) that will return the most recent number of cells containing a value (i.e. not empty) in Sheet 2 Range AD2:A367 greater than zero.
I've tried using COUNTIF but that only adds the individual values, it doesn't 'start from zero again' when a zero value appears.
how to built a formula or a VBA code which would tell me how many times a range of a certain amount of consecutively stnading cells in a given row there is present, where each of the cells belonging to these five cells fulfills a certain criterion.
Example:
How many times does the range of 5 consecutive cells appear in range A1 to P2, where every cells belongng to these 5 consecutive cells would have a value graeater than 10.
I would like to " Validate Data In A Vertical Column To Not Allow Non Consecutive Numbers Less Than 100"
756415
10
456132
7
456123
12
The above is a valid list. Below would be an invalid list:
756415
10
13
456132
7
7
456123
12
13
This part of a larger scope, but I have a macro that will crash if the data entered is entered by way of the invalid list, it works perfectly with the valid list. I am limited to one column user's will input the data via a Barcode scanner that after it recieves input it enter's a "Hard" return. This is a warehouse pickticket program, user's scan their ticket id's (numbers greater than 100000) and then the number of lines on the ticket (usually not greater than 15)