Sum Of Cells Based On Consecutive Value
Feb 4, 2014
See attachment : totals.xlsx‎
I'm trying to get a total sum of row 3 only when there is a "1" in each days of the week in the corresponding decimal point in row 2.
Looking at the entire Row 3, cell J3 and R3 have a "1" in consecutive cells so it should be counted as one value (0.25). The same is with cell S3 (0.50), AA3 (0.50) and AI3(0.50) so it should only be counted as one value (0.50). The Consecutive Occurrences cell AP3, should sum up all of the consecutive values, in this case it would be 0.75.
Please note, the colors will not be there, they are only in this example to show the consecutive values.
View 13 Replies
ADVERTISEMENT
Jun 26, 2013
Is there a formula that would search for rows, or cells withing a row, that contain information and populate consecutive numbers in an adjacent column. For example if I am working with rows 1-4... F1 and F4 has information populated, while F2 and F3 are blank. I would like for the formula to populate E1 with the number 1 and E4 with the number 2. So the formula should decipher that F2 and F3 are blank therefore ignore these rows in the consecutive number scheme for column E. I would like for the formula to be scalable to any number of rows
View 8 Replies
View Related
Jan 24, 2014
I have source data arranged in columns A and B, and in F5 and F6 respectively I'd like to create a formula to return the Null value from column B that's associated with AAA, BBB etc. An example of the results I expect are in F5 and F6.
View 3 Replies
View Related
Mar 17, 2008
a macro that will populate a column with consecutive numbering, recommencing where there is a blank cell to the immediate right.
View 9 Replies
View Related
Nov 12, 2009
My goal is to look at a column of numbers and count the number of consecutive cells that are positive (or negative), while ignoring blank cells that may be in between them. Using the first formula on this thread. http://www.excelforum.com/excel-gene...-than-0-a.html
I was able to adapt it to my own data, but whenever I had blank cells in my data the results were not reliable. the formula i am using now is =IF(COUNT(1/((A1:A27<0)*(A2:A28<0))),MAX(FREQUENCY(IF((A1:A27<0)*(A2:A28<0),ROW(A2:A28)),IF((A1:A27<0)*(A2:A28>= 0),ROW(A1:A27))))+1,0). for a bunch of data in column A. With limited knowledge of excel I'm not exactly sure how this formula works, so I'm not sure how to tell it to ignore all blank cells. I attached an example that shows how it fails with the blank cells
View 2 Replies
View Related
May 30, 2014
I am using a formula =SUMIF(B:B,B1,C:C) in an effort to return the total of those cells in column C where the value of B1 remains the same in column B. (did that make sense?). I've used a similar formula previously but on this occasion it returns an incorrect total.
View 2 Replies
View Related
Jun 27, 2007
I have an Excel worksheet (ver.2003) containing data more than 5000 rows. I need to run a macro everyday to do copy a value for that cell each day from another cell in different respective rows :
Using # as a marker in a specific col (say col X2, X14, X27, X43 and so on ) I want to copy value from another cell (AE2, AE14, AE27, AE43 and so on) containing a forumla and paste as a value to a cell say B4 in a row of fixed range (say B4:V4, B16:V16 and so on), which is two rows below the marker. The value to be copied is located in the 7th cell (say AE2) to the right of the marker cell (X2). If first cell is blank (say B4) then I copy data into the first cell. Every time I run the macro the value should be copied to next blank cell in that row (C4, D4 and so on).
I need to run the macro everyday for a specified no. of days say 21 working days in a month, which is the length of the range) copy the value for each in different rows as explained above. What is the VB Excel macro for this? ...
View 10 Replies
View Related
Mar 10, 2014
B+N Total sheet is where the data is and the decider is Column 'AF' which is already formulated and has 2 options: 'MMS' or 'Retail'.
I'm trying to write a code which needs to do:
If B+N Total sheet's AF Column has 'MMS' then copy that row and paste it into ADI MMS consecutively.
Just like the example attached Row 2,3,5 is MMS and not row 4. So I'm trying to get those rows in periodical order as Row 2,3,4 into ADI MMS Sheet.
View 3 Replies
View Related
May 28, 2009
How would I write a sumif function to only add consecutive cells that match the criteria? Here is the formula I am using right now, but it adds all of the cells that match the criteria, not just the consecutive ones. Also they need to be consecutive cells from the current cell (in the formula below i would be referring to A80)
=IF(A81<>A80,SUMIF(A$5:A80,A80,H$5:H80),"")
More data:
Column A is a group of dates, but not in order, they are slightly mixed up
Column H is a monetary value.
View 8 Replies
View Related
Jan 13, 2014
Need a formula for counting how many consecutive cells where the value is gretaer than or equal to +1
For example 1,
J18 = 7
K18 = 9
L18 = 3
M18 = 2
N18 = 8
O18 = 1
P18 = 8
Q18 = -17
In the above example the result would be 7
Example 2:
J12 = -22
K12 = 9
L12 = 4
In the above example the result would be 0 since the 1st value was -22
View 3 Replies
View Related
Aug 13, 2014
I have a range of say B1:Z2. In row B1:Z1 I have dates in the format dd-mmm-yy. In row B2:Z2 I indicate presence of a person by "P". This is at infrequent appearance i.e. p,p,p,blank,blank,blank,p,p,p,p,p,blank,blank,p,p,blank,p,p,p, etc. I am trying to find or workout a formula that would find the most repetitive Ps in row B2:Z2 and give me the sum thereof. I.e, from the above example it should be 5. It does not have to count specifically P. Something that counts the most non-blank sequence of cells in the range should also do.
View 8 Replies
View Related
Jun 15, 2010
how to display Sparkline from non-consecutive cells.
I want to display it from two apart ranges: A1:C1 and F1: J1
If it can't be done within the worksheet - is there a VBA code to workaround - such as filling-in an Array from the non-consecutive and using that Array as the Sparkline source ?
View 4 Replies
View Related
Jun 15, 2009
I’m trying to figure out how to show the highest occurrence of text in 10 cells which are not next to each other. Some of the cells will also be blank And the other thing is if there is a draw e.g. 5 2Z and 5 1Z I'd like it to show that, either with a word e.g. "DRAW" or anything really other than just putting whichever of the 2 "notes" in it feels like
Attached is a spreadsheet (all other data deleted) that shows what I am wanting to do – I have typed the results I am after directly in to the cells in columns BE & BF – BE will need some kind of countif, but when I try that is says I have too many arguments! I have to leave the columns in between blank in this case as they have other info in them, which is really annoying as if those 10 cells were contiguous then the formula
View 3 Replies
View Related
Feb 7, 2012
Say the Range is (D3:M3) there is data in D3,F3,J3,K3,L3, and M3. I want to count consecutive cells with data from M3 backwards to D3. In this scenario the sum would be 4.
View 7 Replies
View Related
May 1, 2013
I have a worksheet "parent child" with product data, cells F4 and BK4, pull pertinent data from cells T2 and M2 respectively on a different sheet "products".
A5:A196, D5:D196, F5:F196 is dependent on cell F4 and BK5:BK196 is dependent on BK4.
Once we get to row 197, the cycle starts over again. F197 and BK197 needs to equal products!T3 and products!M3. Then rows 198 through 389 will be dependent on row 197.
I basically need this to repeat perpetually for about 1000 different products on the products sheet, thus the ability to create approximately 193,000 rows.
I am not sure what it will take to do this, i am fine if I have to drag and copy all rows, which I have tried to create and failed at, I end up with products! T196, instead of T4.
View 1 Replies
View Related
Jan 16, 2010
I'm trying to create a formula (in Sheet 1) that will return the most recent number of cells containing a value (i.e. not empty) in Sheet 2 Range AD2:A367 greater than zero.
I've tried using COUNTIF but that only adds the individual values, it doesn't 'start from zero again' when a zero value appears.
View 9 Replies
View Related
Jan 12, 2007
how to built a formula or a VBA code which would tell me how many times a range of a certain amount of consecutively stnading cells in a given row there is present, where each of the cells belonging to these five cells fulfills a certain criterion.
Example:
How many times does the range of 5 consecutive cells appear in range A1 to P2, where every cells belongng to these 5 consecutive cells would have a value graeater than 10.
View 8 Replies
View Related
Mar 19, 2008
I would like to " Validate Data In A Vertical Column To Not Allow Non Consecutive Numbers Less Than 100"
756415
10
456132
7
456123
12
The above is a valid list. Below would be an invalid list:
756415
10
13
456132
7
7
456123
12
13
This part of a larger scope, but I have a macro that will crash if the data entered is entered by way of the invalid list, it works perfectly with the valid list. I am limited to one column user's will input the data via a Barcode scanner that after it recieves input it enter's a "Hard" return. This is a warehouse pickticket program, user's scan their ticket id's (numbers greater than 100000) and then the number of lines on the ticket (usually not greater than 15)
View 2 Replies
View Related
Mar 27, 2014
I wanted to count the number of instances that Matt's been late. If there are consecutive timestamps (ex. 600-620, 620-640) that he's been late, I wanted Excel to display 1 and then I'll just sum it up. Or if Excel can do this directly, add all the instances because what I actually need is the total per person.
In this example, I would need a result of 4 instances.
tell if the blank cells will affect the formula or if I still need to do something about them.
View 3 Replies
View Related
Dec 4, 2013
1.jpg
I wan to calculate the average for three cells not in Sequence using AVERAGEIF with condition (VALUE >0)
View 5 Replies
View Related
Feb 18, 2014
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
View 1 Replies
View Related
Feb 26, 2013
I am working on two worksheets. On my first worksheet I have one column with consecutive numbering starting from Cell 8.
A8 = 1
A9 = 2
A10 = 3
A11 = 4
A12 = 5
On my second worksheet I want to link to the values in the first worksheet but not in a consecutive manner. Each number will have an interval of 15 cells. As shown below:
D15 = 'link on Sheet1!A8'
D30 = 'link on Sheet1!A9'
D45 = 'link on Sheet1!A10'
D60 = 'link on Sheet1!A11'
D75 = 'link on Sheet1!A12'
View 6 Replies
View Related
May 29, 2014
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
View 14 Replies
View Related
Mar 18, 2008
I need to count the maximum amount of consecutive crosses that appear in a list. For instance:
x
x
x
x
x
x
x
x
x
the result would be 4, because the highest amount of consecutive crosses in this list is 4 times.
Would anyone mind providing me with a formula for this, please? The list is from C5:C52.
View 10 Replies
View Related
Aug 10, 2006
I received the answer on assigning consecutive dates but what can be done to
the formula
=INT($A$1+INT(ROW()-1)/30)
TO:
1. Not include weekends
2. Only assign the date to a certain person's name if there is multiple reps
on the spreadsheet.
View 14 Replies
View Related
Jul 22, 2008
I have 3 columns, in column 1 and 2 there will be numbers and I want automatically to get in column 3 the range of numbers between Column 1 and Column 2
Column 1 - 100
Column 2 - 500
Column 3 - 100, 101, 102, ..., 500
View 9 Replies
View Related
Oct 31, 2008
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
View 9 Replies
View Related
Jun 24, 2007
I have a daily column of numbers of approx 600 rows and the number is either a 0 or 1 and the 0 or 1 are in a random order in each row like:
1
1
1
0
1
0
0
0
1
0
0
1
I would like to find the min number of rows with 1, the max number of rows with 1, the totals of consecutive rows with 1 ie 3 consecutive rows of 1 appear 4 times, 4 consecutive rows appear 6 times etc and the average of the consecutive rows with 1.
View 9 Replies
View Related
Apr 17, 2014
i have a list of numbers in a column, and i have sorted it smallest to largest, now i wish to identify which ones are consecutive in the column.
5184730512
5184730547
5184730763
5184730766
5184730767
5184730836
5184731135
5184731136
5184731149
5184731212
5184731222
5184731389
View 4 Replies
View Related
Jun 13, 2008
I have Excel 2000.
If I have columns A B C D E how do I copy A and C only (at the same time) and paste them into a new workbook? I get a popup saying it's not possible.
I don't want to copy one column at a time in case I make a mistake and item 1 in column A no longer lines up with item 1 in column C (I'll be performing this at least daily and the results will go on a website)
View 10 Replies
View Related
