I have a list of 800 fund names that can be any one of 6 types of funds. It is easy to filter the names using the filter function, but I cannot get it to be a filtered list for my dropdown box. The dropdown box should only list those fund names of funds that is of a certain kind. I know I am missing something small.
If the accompanying data is used as an example, I would like a dropdown box with the names of all the I funds.
I also have a user form with two listboxes, a fruit box and a veggie box. I want to populate each box based on its type. So all of the fruits go in the fruit box, all the veggies in the veggie box. I have each column as a named value (lstKeys, lstTypes, lstName).
Code:
'Add Names
For Each Name In Range("lstNames")
If Range("lstType").Value = "Veggies" Then
[Code]....
Wasn't sure what the easy way to do this is. I'm trying to have a drop down menu where choosing a certain item triggers specific information to fill multiple cells. For instance, choosing Work Contacts in a drop down menu brings up four different people's names in cells B43-46 and their phone number in C43-46 and email in D43-46. Choosing another item for instance, Personal Contacts, would reveal a different set of four names and information.
View 2 Replies View RelatedI have a document to track funding and would like to be able to auto-populate individual task sheets within the workbook based on a task drop-down. So if I choose Safety from the "Task Area" drop down it would auto populate the full row from the Master Sheet to the Safety Sheet. I have uploaded my document so you can better understand.
Funding Roll-up for 5.1.xlsx
Based on the value (month) picked from a dropdown list, I want to go to the specific range of that month in the same worksheet.
Attached you can find a sample sheet. Map1.xlsx
Say columm Ahas values like:
A1
A2
A3
A3
A1
A2
G5
G5
101
5000
4574
5
Is it possible to have this columm filtered to return a dropdown list say in Cell B1 to show only unique numbers? In the case above would return;
A1
A2
A3
G5
101
5000
4574
5
Almost as in data validation "List".
I'm new to excel and was trying to make a workbook that will have a drop down list populate based on a user input in two separate cells. Basically, i have columns: name, pages, and books. I would like to have the drop down list match data by first finding the amount of books read, then finding the amount of pages read. Then any name that meets the criteria will be available in the drop down list. How can I do this?
View 1 Replies View RelatedI have the following table with weeks to display for the holidays and my column H has a drop down list of the first column in the table below with the Named Range, "SNCODE.Season_Codes".
The other two Named Ranges are, "SNCODE.Season_Codes.Start" and "SNCODE.Season_Codes.End"
I need my column K to display a list of weeks from the first week to the last week. For example, the cell in column K for Valentine's Day should have 1, 2, 3, 4.
Basic 1 53
Promotional 1 53
Seasonal Spring 1 13
Seasonal Summer 10 26
Seasonal Fall 23 39
Seasonal Winter 36 53
Valentine's Day 1 4
Halloween 31 40
Christmas 36 48
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side.
There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
scheduledemo.xlsx
I have a spreadsheet listing various pieces of computer hardware, software and mobile accessories, etc with costs attached.
I have created a dropdown list of staff profiles eg a sales representative, finance assistant, IT administrator.
What I want to do is get Excel to pull the data through from the data sheet, to a printable summary output form (something you could also cut and paste from). For example, a sale rep would need to be set up with a laptop, laptop case, mobile phone, etc, so when you select Sales rep from droplist, I want that action to pull all the associated data through to the summary form. Similarly, a Finance assistant would require different kit , perhaps a desktop PC , monitor , etc.
Next to my data I have created columns with "Y" for yes in cells containing kit that match the staff role requirements, but I am not sure of the best way to pull this together.
Basically on a summary page, on sheet 1 say I have a formula which picks up the unit cost (I have this as an array across 5 years)
What I then want to do is multiply this by a volume driver. I have a list of these drivers on a seperate page, so for convenience lets say DRIVER_01,DRIVER_02 etc. These are also 5 years arrays.
So what I want to do it be able to select which driver I want to use for volume on the summary, from a drop down box I have set up, and then the formula pick up that named range, and not just recognise it as a text cell.
I need the ability to change the driver in the future, hence the drop down box. I can also get the unit array part to work fine, I'm just struggling to get this driver array to work..............
I have a dynamic dropdown list in B3. The dynamic dropdown list in B4 is a result of my choice in B3, and my dynamic dropdown list B5 is a result of my choice in B4.
When changing a value in B3 the dropdown lists B4 and B5 will be reset. This is done by this VBA Script in my worksheet.
Make a Data Validation dropdown list that also enters a range for cells, for example:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
Lounge ¦ Low ¦ Large ¦ Easy ¦ Blank ¦ 0 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 month
Bedroom ¦ Low ¦ Large 100 ¦ Easy ¦ Blank ¦ 1-3 ¦ Daily ¦ 1-3 ¦ Low ¦ >1 year
Bathroom ¦ High ¦ Upto 100 ¦ Easy ¦ Blank ¦ 0 ¦ Weekly ¦ 1-6 ¦ Low ¦ <1 year
I can make a dropdown list for:
Kitchen
Lounge
Bedroom
Bathroom
But if I select "Kitchen" I would like it to enter the rest of the cells in that row:
Kitchen ¦ High ¦ Upto 100 ¦ Easy ¦ 2 ¦ Daily ¦ >6 hrs ¦ Medium ¦ >1 week
The total number of rows I use is 10, and the number of items in the dropdown list will be 30.
The data in the cells 2 to 10 does not change from that first set to its data menu name.
I have a list of email aliases for my company, approx 10,000 entries, mapping the alias to an email address. Two columns, one the alias firstname.surname, second column being the full email address. I have a second list, a subset of these aliases, approx 1200 of them, that are users of a particular web app. All i have in this list though, is the firstname.surname bit.
What I need to do is compare the lists, and where the aliases match I need to pull out the corresponding full email address from the long list, so I have 1200 aliases in the shorter list, with the full email address mapped to it. Is this possible in excel? i've tried all sorts of LOOKUP functions, and MATCH functions, but none seem to work. MATCH will give me the corresponding row number in the long list, but then it seems to offset itself every row it goes down, so the values are 1 out for every row. First row is good, second row -1, third row -3, fourth row -4 etc.
I don't want to have to manually go through 1200 entries and match them against a 10,000-entry list. Hopefully there's a quick way in excel to filter the long list down to the entries specified in the short list?
I have a table of information on a worksheet and one of the columns determines whether the item in that row is active (there will be active and inactive items in this "Main List")
On a seperate worksheet (in the same file) I want to only display the active items in a new table (Overview) and always ensure it has no empy spaces other than at the bottom of the list, so if row 1/2 in the Main List are inactive items then the first row in the Overview List would display row 3 from the Main List.
Ideally I would rather do it in a formula than VB if possible.
I've attached a file showing what I am trying to explain, where the Overview tab currently has the data typed in it should automatically populate based on column "I" on the MainList tab.
example.xls
I am trying to create a sub-list from a master list based on a column criteria.
Basically, we have a large group of people that are now being split into 3 different sub groups, but still part of the whole. I would like to only upkeep the master list by assigning one of 3 managers to each employee and then having Excel place the employee's info (5 columns) into a seperate worksheet based on the manager assigned (3 seperate worksheets, one for each manager). I have searched through books and Excel help, but still cannot find any formula that can return multiple lines based on one criteria. Am I out of luck and forced to maintain this database with an Auto Filter and manually moving/copying the info?
What I have is a spreadsheet with a names column A and purchasing information in columns B-AA pertinent to the name in A. Additional information pertinent to the same name in Cell A1 exists in B2:AA2, or 3 etc. depending on the number of purchases made by the name in column A. The spredsheet is well over 100,000 rows long. Is there a method of copying the names so that each purchase has the correct name associated with it in the corresponding (currently empty) cell in column A? .....
View 2 Replies View RelatedI can't seem to find the answer to this question. I have a sorted list of data 3 cells wide, 120 cells long. I wish to have this data put into a scroll bar so I may scroll the data, select, and it will output to a chosen cell.
I assume the ScrollBar control is the choice but since I have no experience with any controls, I am at a loss. I have thus far only managed to insert the scrollbar, click on the properties and then I'm ?.
1. How do I specify the range of cells to display?
2. How do I specify an output cell after selecting from the list?
I've attached a spreadsheet to view the data.
If I choose 1 thing from a list I want it to then fill in many cells with info.
For example: I have a color list to choose from, once I make my choice cells near it fill in with 1.5lbs yellow, 2lbs blue, 4lbs red,.....or what ever I have established as the "recipe" for my color choice. When I choose a different color from my list these cells each fill in with different values.
I am currently trying to add some functionality to an Excel workbook and I have a combo box that I am unable to get the values to populate. On the same worksheet I have a command button. Here is the code I am using to attempt to populate the combo box:
Private Sub cmdSendSave_Click()
Call SendSave
End Sub
Private Sub bxLocation_Change()
With bxLocation
.AddItem "Mt. Hope"
.AddItem "Summersville"
.AddItem "Huntington"
.AddItem "Pulaski"
.AddItem "Coastal Bend"
.AddItem "Odessa"
.AddItem "Wheeling"
.AddItem "Hollywood"
End With
End Sub
to dynamically filter a list as shown below
View 9 Replies View Relatedi m kinda playing with the drop down list and i decided to make a list about the nba teams.
heres the breakdown:
1st row
conference: east/west
2nd row
east: ATLANTIC/CENTRAL/SOUTHEAST
west: SOUTHWEST/NORTHWEST/PACIFIC
3rd row
the teams list is next.
now ive learned how to do a drop down list but i cant find a way to filter the 2nd row. i hope you can gimme some tips or ways on how to go over this. i tried data>filter but thats not what i need.
here is an attachment and i used sheet 1 for the input and sheet 2 for the list of the selections.
I'm working out some vba script, that could filter up to 300,000 rows long list.
here is sample from that list:
1000999999027FRESH PASTA FETTUCINE WITH TOM102002P N0809100000035000000012810000000+0000000+ 0000000000000000+0203001896409
2000999999027020300189640900000000000005740200070063
1000999999027FRESH PASTA FETTUCINE WITH SPI102002P N0809100000025000000015700000100+0000000+ 0000000000000000+0203001896454
20009999990270203001896454000000000000057010180265125740200070070
As you can see, the rows are starting with 1000 and 2000. And that would be the criteria.
I'm importing the loooooong list file onto sheet1, and i'd like to sort the list so it puts all the codes starting with 1000 onto sheet2 and rows starting with 2000 onto sheet 3.
With regular filtering mode it's impossible and keeps giving errors.
I know it's possible, but i can't figure it out anymore.
I was thinking about to make script that would copy one row from sheet to sheet and loop it. But my mind just crashes doing that.
I have a quick question in relation to filling a range with an array.
When I use the following code:
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:C1") = s
End Sub
It works fine. but when I try to populate the range in rows instead of colums, the array value stays as the first value.
Code:
Sub justdoit()
s = Array(1, 2, 3)
Range("A1:A3") = s
End Sub
I'm experimenting with arrays and would like to get better at them, but this has me stumped for the moment. How to get the values to work going down, like they do going across.
The above code is a small sample of data, I am wating to replicate with using over 80K lines and cell by cell is too slow.
Is there a way of filling a range of cells alphabetically?? Probably missing something obvious here!
View 5 Replies View RelatedI have a pivot table with a group # on the left, and team members on the right. There are multiple team members in each group, and each are on a separate line in the pivot table, like this:
Group #Team1chrisdawnsally2cassiechrisdawnkathysally3jimjoejohntomGrand Total
I need to find where "sally" is on the team (easy to do"), BUT I need to display the rest of the team members in the group with her, like this:
Group #Team1Sally, Chris, Dawn2Cassie, Kathy, Sally, Dawn, ChrisGrand Total
Using the concatanate function to put them all into one cell and then filtering for "contains" was all I could come up with, but there are 14,000 groups
I've got two long columns of dates and names. The dates and names can repeat. Eg:
01/01/14
Fred
01/01/14
Joe
01/01/14
Tom
[Code] ........
I want to input a date and create a list of names with only the names from the date I enter and earlier, and excluding names that appear again with a later date.
E.g. if I enter 01/01/14 I'd get:
Joe
Tom
But not Fred, as although he appears on 01/01/14 he also appears with a later date too.
I need to filter a list without the use of the Auto Filter or arrays. I'm importing the list into Xcelsius which doesn't support these functions. I will need to do the filtering with functions.
I have a list of cells i want to select my information from and in addtion i want to select the list all except one value in a box:
eg......
Value in Box: C
List of Values:
A
B
C
D
E
F
G
Therfore i want in a validation list all the values (A - G) except the value represented in the box, hence (C).
I have a combo-box in a Multipage control. Now I want to get the combo-box populated with list in 2 columns from 2 different consecutive columns from the same worksheet (Product List). Now, Once the list gets populated, user will be selecting his choice from the list, which is then needs to get copied to another worksheet (Order Placed). Both worksheets exist in the same or one spreadsheet.
I am trying to make it work with the following code. I am able to see 2 columns but with no data getting populated. I am working in MS Excel 2007.
[Code] .....