Adjustable Rows Via Separate Cells
Dec 10, 2013Need to adjust the length of a countif formula from a separate cell
something like this ?
=COUNTIF($BB$23:$BBH21),">0")
H21 being the cell i will change value to indicate rows
ADVERTISEMENT
Under Solver, The Changing Cells Box Only Alllow 200 Adjustable Cells
Apr 26, 2007Under Solver, the changing cells box only alllow 200 adjustable cells. I had problem that my adjustable cells is more than 200. Is there anyway I can increase it ? maybe using VB.
View 2 Replies View RelatedSplitting Multiline Cells Into Separate Rows
Feb 13, 2014I basically have a five column spreadsheet containing address information. While most cells only contain one piece of information, I have quite a few cells that have multiple lines of data in them because the individual has more than one address.
Here is an example. Note that Rows 1-2 contain single address info for each individual person. However, row 3 contains an individual with 3 pieces of address information in the four right hand columns:
Row 1: Unique ID | Name | Street Address | City | State | Zip Code
Row 2: Unique ID | Name | Street Address | City | State | Zip Code
Row 3: Unique ID | Name | Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
[carriage return in street address, city, state and zip cells]
--------------------------------- |Street Address | City | State | Zip Code
Row 4: Unique ID | Name | Street Address | City | State | Zip Code
Row 5: Unique ID | Name | Street Address | City | State | Zip Code
Please note that some individuals have 2-4 different addresses.
I would like to manipulate the 5 rows of example data above so that when I am done I have the following:
1. 7 rows of data (5 individuals with 7 total addresses)
2. Automatically copy and paste the unique id number and name into the two new rows that were created so that I have the following:
Row 1: Unique ID - 001 | Joe Chang | Street Address | City | State | Zip Code
Row 2: Unique ID - 002 | Joey Chung | Street Address | City | State | Zip Code
Row 3: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 4: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 5: Unique ID - 003 | John Smith | Street Address | City | State | Zip Code
Row 6: Unique ID - 004 | Jane Derry | Street Address | City | State | Zip Code
Row 7: Unique ID - 005 | Julie March | Street Address | City | State | Zip Code
Separate Comma Delimited Cells To New Rows
Mar 31, 2008I have a 5K rows of data, each including a cell (AD) of multiple number values, separated by comma. I would like to create a new row for each unique number in column AD such that there remains only one unique value for every AD cell.
If possible, I would prefer an in-cell formula rather than a macro.
Finding Macro That Will Combine / Consolidate Rows When Cells From 2 Separate Columns Match
Sep 26, 2013I need a macro that will combine/consolidate rows when cells from 2 separate columns match. example...
beginning:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 1064 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 80 unleaded 1101 100100
row 4 Seminole 30 dyed dsl 3421 100100
This is what I need the macro to do:
Column A column B column C column D column E
row 1 Seminole 80 unleaded 2165 100100
row 2 Seminole 36 clear dsl 825 100100
row 3 Seminole 30 dyed dsl 3421 100100
Shade A Cell Red If Two Separate Conditions Apply (in Separate Cells)
Dec 3, 2013I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedAdjustable Percentage Bar
Jun 23, 2006I'm trying to build this model on Excel which has a graph in it. The graph uses several variables. Is it possible to create an adjustable percentage bar using VBA which would change these variables? look at the attached picture to understand what I mean.
View 4 Replies View RelatedAdjustable Print Areas
Jun 12, 2007I have a table that lists staff according to where they are located, all adjusted using drop down lists, problem is that some locations have 5 staff and some up to 40, so when I set up a macro to print the area, those with 5 consultants look very small because the page area is so big. how can I adjust the print area dynamically so it only prints to 1 row below the last line with text?
View 9 Replies View RelatedUserForm - Create Adjustable (Resizer)
Mar 22, 2014i want to make my UserForm Adjustable ( Resizer )............i m posting here a sample of Adjustable ( Resizer) UserForm, and also pasting my own UserForm
make my Userform Adjustable ( Resizer )
my user form
My own UserForm.xlsm
example of Resizer Form
Resizer Form.xls
How To Separate Text From Numbers Into Two Separate Cells
Feb 13, 2014I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
1 Row Cell Covering 4 Rows But Next Column Divided In Separate Rows
Jun 5, 2014I am working with an excel spreadsheet. There is a column for "name", and then the next column is for medical condition.
If the same patient has multiple (say, 4) conditions, the rows for "name" are combined into a single cell(let's say, a cell going from row 2 to row 5, witha a single name in the combined cell) , with the next column having four different cells adjacent to the single cell (cell 2 has "bleeding", cell 3 has "fever", cell 4 has "diarrhea", and cell 5 has "rash"). Some patients have only single conditions, single cells.
Will this mess up COUNTS and COUNTIF?
Is there a way to split the combined cell2-5 for ''name" into four cells all containing the same name?
Macro To Separate Lots Of Rows With Certain Amount Of Blank Rows
Feb 15, 2014I have been using this macro to separate lots of rows with a certain amount of blank rows.
Example:
Code:
Sub test()
Dim j As Long, r As Range
j = InputBox("type the number of rows to be insered")
Set r = Range("A2")
[Code] .......
I trying to change it so that, instead of inserting how ever many blank rows, it just copys the row above.
Example (Row A to C)
I have been messing around with macro recorder and i could select each row and paste it into the blank rows, but from researching on the internet selecting and pasting data seems to be a waste of resources (ram?) and i will be running this on a couple hundred rows (lots of data). Also, i would like to keep the functionality so that i can still choose how many times it copys/inserts each individual row from a input box.
I eventually want the data to end up like it is shown in the table but i am takin it one step at time because i want to understand what the code is doing.
Convert Rows With Repeating Data To Separate Rows
Aug 5, 2009See the attached xls. There are two worksheets contained therein, one with the original data, and the other showing how I'd like it organized.
I have rows of product data consisting of a product id followed by repeating attributes of quantity and associated price. I need to convert each product row to multiple rows of each quantity/price pair while preserving the id for each pair.
Linking Cells Globally To Allow Users Ability To Change Cells On Separate Sheet / Cells?
Feb 18, 2014I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
Separate Header Rows To Their Own Row
Jul 29, 2009I imported data into Excel. The first row is a header row in A1 it is fine until the next header row in A12, A23, A34 all the way down to many rows. The problem is the header rows are overlap with other data by seperating with couple of spaces. I need a VBA to move a whole header characters to it own row just right after couple spaces. See the attached for more detail.....
View 2 Replies View RelatedSeparate Whole Words Into Two Rows
Dec 29, 2005I want to separate the following words into two rows. As the length of each word is different, so i could not use 'text to coumns' function.
for example:
Word1 : the board of directors of abc company limited (len = 45) in cell u13
Word2 : the board of directors of abcdefgh company limited (len =50) in cell u14
I use the formula to separate word 1 into two rows: return #VALUE
1st row : =IF(LEN(U13)<40,U13,LEFT(U13,FIND(" ",U13,40))) in cell u15
2nd row : =IF(LEN(U15)<40," ",TRIM(MID(U13,LEN(U15),99))) in cell u16
But i use same formula to separate word2 into two rows : successful
1st row : =IF(LEN(U14)<40,U15,LEFT(U14,FIND(" ",U14,40))) in cell u17
2nd row : ==IF(LEN(U14)<40," ",TRIM(MID(U14,LEN(U17),99))) in cell u18
Answer : 1st row : the board of directors of abcdefgh company
2nd row : limited
Separating ODD And Even Rows Into Separate Column?
May 13, 2013I have one column of data, I would like to separate the ODD and Even row values into two separate column, such that the data will appear staggered.
ie. this is my data in column 1
1
2
3
4
5
6
7
8
would like to separate it into columns 2 and 3 as follows
1
.....2
3
.....4
5
.....6
7
.....8
I believe I need to use the ISODD, ISEVEN function somehow but can not figure it out.
VBA To Add Textbox Data To Separate Rows
Jul 16, 2014I have a long textBox with multiLine = true and enterKeyBehavior = true. I need for each new line in the textBox to go to a separate row in the worksheet. Right now the data is copied to the next row in the worksheet, but all of the data in the textBox is entered into one cell. Is there a way for the lines to go into separate cells?
Example of what i am trying to accomplish:
TextBox:
|------------------|
|blabla in line 1 |
|blabla in line 2 |
|blabla in line 3 |
|etc................ |
|etc................ |
|_____________|
then the VBA code would separate the lines into separate rows:
Worksheet:
Row 1: blabla in line 1
_______________________
Row 2: blabla in line 2
_______________________
Row 3: blabla in line 3
_______________________
Row 4: etc..
_______________________
Row 5: etc..
How To Separate Rows Of Data Automatically
Jun 22, 2013Let's say I have a document with 10 different sections in it. I download it from another piece of software so there is a header/etc on each page. Each page has the name of a company on it in the A column and the name of a section on it in the cell directly below the company name. (Lets call the sections candy, toys, medicine, etc.) I want to separate the information by creating a new sheet for every section and name it toys_sheet, candy_sheet, medicine_sheet automatically. How could I do this?
View 4 Replies View RelatedFreezing Separate Rows When Using Filter
Aug 6, 2008I'm using a fairly large spreadsheet to put all the cost and benefits of a large area development phased over different years and then calculate the NPV of the total project. The costs/benefits are on separate sheets and are divided into categories with headers. Every category has a summation row as last row.
Because the project is divided into subprojects I created a column which has a dropdown box (using the Validate function) in which I can attribute that cost/benefit to a certain subproject. Using IF functions and another dropdownbox on my Overview page I can get a insight in the total cost and benefits of the subproject I select in the dropdown box.
So far so good of course, but what I really want is not only to be able to get the Overview page per subproject, but also the Cost and Benefits pages. I was thinking about putting a filter on the column which has the dropdown boxes with the subproject number in them, but when I select a number I want all the headers and "summation rows" of all the categories to freeze/stay in sight, because otherwise the output of the filter is useless (for printing and evaluating) ...
Excel 2010 :: Separate Two Rows To Two Columns?
Feb 26, 2014I am trying to separate two rows to two columns. How can I do this for +200 data. For example,
1
Apple
2
Ball
3
Candy
....
I need this to be:
1 Apple
2 Ball
3 Candy
and so on.
show me how I can do this for Excel 2010.
Getting Rows From Separate Sheet That Matches A Condition?
Mar 10, 2014If I have these on Sheet 1
Name Age Cutoff
PersonOne 27 21
PersonTwo 21 20
PersonThree 19 19
PersonFour 17 20
generate/list/display on the next sheet (Sheet 2) of all the rows that has AGE less or equal to Cutoff, so on Sheet 2 based on the Sheet 1 data, I should get the following rows listed:
Name Age Cutoff
PersonThree 19 19
PersonFour 17 20
Separate Comma-delimited Values To Rows
Oct 22, 2009I have an excel sheet I create with lots of inventory items distributed amongst several locations. The first column is a location field where several 1-2 digit location codes are seperated by commas. I would love to get the macro to copy each row, once for each location code, onto a new tab as a new longer list. Because the amount of data per row varies, I need the entire row to be copied to the new tab....
View 10 Replies View RelatedCode To Separate Data Into Individual Rows
Oct 15, 2013i have a large table, columns A:F, would like a code which would look at the text in column F and create a new row for each bit of text separated by comma
probably easier to show what i mean, here is a section of the table, in this example store 13121 needs multiple rows.
start with this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th { background-color: #104E8B;
[code] ......
and turn it into this:
HTML Code:
table.tableizer-table { border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif font-size: 12px;} .tableizer-table td { padding: 4px; margin: 3px; border: 1px solid #ccc;}.tableizer-table th {
[Code] .....
Select Multiple Rows As Separate Selections
Jul 27, 2006Is there a way (with a macro?) to select all rows within a certain range (e.g. from row 3 to the end of the sheet) SEPARATELY, just as selecting them manually with ctrl+select?
Like in my example sheet;
I would use the AutoFilter on row 2 to show only the items with prices equal to 30. Now I want to select the entire rows (name, amount & price) of these two items, so that when I turn of the AutoFilter the two rows would still remain selected.
Identifying Matching Rows Between 2 Separate Spreadsheets
Aug 11, 2006I have 2 separate spreadsheets. Spreadsheet #2 is a full list of items. The item names are in Column A. In Column B is an associated primary number. In Column C is an associated secondary number. Spreadsheet #1 is a partial list of items. The item names are in Column A. The primary number is in Column B. There is no secondary number given in Spreadsheet #1.
My objective is to find out what items in Spreadsheet #1 have a secondary number in Spreadsheet #2, and to group them all together so they can be easily identified. I am attaching a couple of example spreadsheets to give an idea of what I'm working with. The example's are small so it would be easy to just eyeball them and see what ones match up however the real spreadsheets I am working from are thousands of lines long so obviously eyeballing them is not the ideal way of doing it. Is there a formula I can use to reach my objective?
Loop Through Rows And Copy To Separate Sheets
Apr 3, 2007I have a table of data 100's rows 10 cols. In col A is a name like USA - these refer to sheet names in the workbook. The other cols are numbers.
I need to write a macro to start at row A and go down the rows 1 at a time and copy and paste that row to the bottom of the sheet named in Col A.
Actually needs to insert at the bottom of a table in the USA col rather than just paste as there is other data further down.
Create Copies Of Items And Their Attributes Into Separate Rows?
Oct 2, 2013I am trying to take items with multiple market attributes and columnized them so that they can be sorted or filtered.
For example,
Item 110 is suitable for Preteen, Teen, Young Adult, Adult and Senior
Item 121 is suitable for Teen and Young Adult
Item 250 is suitable for Senior
Item 300 is suitable for Young Adult, Adult and Senior
I want to be able to arrange the attributes vertically so that the attributes can be filtered. I'm thinking the easiest way to do it is to duplicate each row as many time as there are attributes and copy each attributes to a single Market column.
Excel 2010 :: Total Data That Is On Separate Rows
Oct 22, 2013I have a large amount of data that is from an events file. When I enter it into excel, it almost maxes out the row count (excel 2010) The data basically lists Event, Date/Timestamp, Call ID, and a few other details. Im trying to get a total of specific events and if they were successful or not, so the other columns arent of concern. For instance, there is an event called searchbyphone, a later row in the data will include searchresult found or notfound. The only way to pair these up is by the ID number which is unique per call.
So in the example below, ID 123-45-789a was a search by phone and successful (found). The Date/Time field is down to milisecond. If this were just adding up all the various events and then totalling the searchresult found/notfound, it would be simpler. However, Im only interested in certain events and found/notfound is used for many other events.
Using the data below, what is the best way to pull out an event (say the total number of searchby phone) and then know how many of those were found and not found (when the information needed is on 2 seperate rows and only the ID would be the same?)
To through a wrench into it, there can be several events with the same ID becasue the ID is unique to a call - a caller can search by a few variables. There will be the same amount of found/notfounds though with that ID. (meaning as a caller, I can do a few searches and all of these will be in the event file with the same ID) In this case, the number of requests (events) will match the number of results (found/not found).
What Im trying to accomplish is to get a total of searchbyphone found and not found, So in this example I would have searchbyphone found = 1 and searchbyphone notfound = 0.
ID
Event
Date/Timestamp
123-45-789a
searchbyphone
10/7/2013 12:52:38
987-65-432b
searchbycity
10/7/2013 12:52:39
123-45-789a
searchresult.found
10/7/2013 12:52:41
874-35-123c
searchbyzip
10/7/2013 12:52:42
987-65-432b
searchresult.not found
10/7/2013 12:52:47
Excel 2003 :: Separate Data Out Of Column That Exists In Different Rows?
Oct 27, 2013I know how to separate data into different columns i.e. Marry Johnson into two separate columns; however, I have data in different rows that I need separated into different column. See screen cast [URL]
Using excel 2003 on windows 7 64 bit