VB To Copy Last Column Of Table To The Next Cell To The Right
Jun 27, 2014
I'm trying to find the last column of my table that will change from week to week and copy the contents of that cell and the one beneath it and paste them into the two cells to the right of them.
Here's what I've tried:
Sheets("LY - TY Chart - Tot. Sell $").Select
Dim lastTableColLY As Long
Dim lastTableColTY As Long
Dim nextTableColLY As Long
Dim nextTableColTY As Long
I have two Tables, Table1 and Table2, in a single Excel spreadsheet. Table1 is our master log, and Table2 contains only Provider Names, Contact Names, Phone Numbers, and Email Addresses. I need to compare column K from Table1 with column AT from Table2. Whenever Excel finds a perfect match, I need Excel to copy AW:AY to AB:AD. For each value in column AT, there will be several identical matches in column K.
I have tried to implement vlookup() and index(match()), but cannot figure either one of them.
Table1 is almost 1500 rows long, while Table2 is not quite 80.
I am able to autofilter the table with a criteria on Column C, but I can't figure out how to mirror the visible cells on column C, on column B. Is that possible to do?
Example
Col A Col B Col C SN0001 1/31/2013 1/15/2013
[Code]...
I want to filter column C to show only February and March dates, and overwrite the corresponding rows in Col B with the same dates in Col C.
This is a simplified version of what I am trying to do. In reality The column B information overwritten periodically, then further updated with information collected from several different sources.
I have a list of items that I am preparing to upload to an access database. The list is quite lengthy and has required a lot of manual corrections to get it prepared for upload. It also has several columns that are not needed in the access database, but that I used to make sure that all of my data was ready. What I'd like to do is create a new table that will have the same structure as the table in my access database and upload the portion of data that I have ready now so that I can do some further development using actual data. In order to do this I need to extract the ID Numbers (column B values) of the records that are marked "True" in the "Ready" column (column G Values) and deposit them in the new table. I only want to copy over the ID Numbers as the additional fields will be populated with match / index lookups from a third table that I have on another worksheet.
i have three sheets in this workbook. i want to filter the the pupils with less than 20 marks in total at the end and copy it to the page named filter, from which i will go to the sheet1 which gives a remedial plan for ONLY those pupils who come in the filter page. this is all good but the problem is that when i update the Cont page, it wont update in the filter page.
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?
I have a workbook that has multiple tabs with data already entered. I have also built a series of tables/forumlas to display summaries of the data. My desire is to be able to copy this table with all formulas/formatting/cell sizes to the various existing tabs.
I have this code that I have been using fine until today when it just stop working for me... It's a simple copy and paste using VBA Code. The code finds the last row in Column A and copies the cell to L1. Below you will find the code I'm using and the line in yellow is where I'm getting the error.
This codes runs as soon as the worksheet opens and it has worked for over a year. I'm using MS Excel 2007. Please let me know what you guys think I have tried pretty much everything I can think of but i dont really know what i'm doing when it comes to VBA.
Im trying to write a formula that will check if a name that I have in column A also appears in column B and if it does I want it to return a value for example TRUE in column C.
I'm currently doing a survey and I have all employees in column A (600persons) and then column B I enter thos that have taken the survey. So If an employees name exist in column B he/she has done the survey and then they I get the value "TRUE" or "1" or something else. So in this way I can easily see who has and who hasn't done the survey. I've been trying with VLOOK and so on but I can not get it right? Maybe I need VBA?
search column "E" for a specific text value (let's say "it"). When found, copy the value in column "A" for the corresponding row where "it" was found to another cell "F2". When copying to cell "F2", if a value already exists in cell "F2", then no nothing else copy the value. If no "it" was found in the column, do nothing. I will continue to search, but since I am new to VBA it takes me a bit to find what I specifically need.
But this uses column A as the longest column... but sometimes it will be column I - how can the formula be adapted ? or can it be ? i've been looking at the Max function and trying to incorporate that but my limited brainpower has gone to mush.
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab 001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447 001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
I am really desperate about this. I have a column of which I only want every 9th cell value listed seperately one below the other in a seperate column.
I tried defining the first two cells of the new column (e.g. first cell input is =B1 and second one is =B10, third one would be =B19 and so on...) and using the usual pull down.
In short: I want to copy values from A1,A10,A19,A28...(always +9) into B1 (from A1), B2 (from
PS: I have access to the 2008 Mac OSX version as well as to the 2007 Windows version!!!
I have a table that i use for a customer database. and the end user adds new customers to this table, what i would like is for a message box to pop up whenever cell B2 matches an entry in a column in the customers table. the table starts on row 25, and the column i would like to check for duplicates is column B. I would like the message box to give the user the message "A customer by this name already exists, Would you like to load this customers file?" If the answer is yes, then the row that the match was found on would be copied and pasted onto row 1. if the answer is no, then nothing else happens. I hope this makes sense, i am posting this sheet of my workbook for reference.
I’m trying to write a macro to look down two different columns in my work sheet and if the is a value >0 then copy a set range of cells to another sheet,
I need to search column (k) and (x) range (“K2 : K147”) and (“X2 : X147”) in (sheet1) for values >0 if there is, then copy from (“f : m”) if it is found in the (k) column, or copy from (“s : z”) if it is found in the (X) column, and paste value only to the next empty cell in sheet2 . Sheet2 is empty so (A) on down is fine for paste range. There is a spin button in the copy range column (L) and I don’t want that picked up in the copy. Manually I (paste text) only but I think (values only) will do the same thing.
Is there way I can copy the BOTTOM cell amount in a specific column, to another specific cell in another workbook? I update a worksheet with a new row of data each day. I want to copy only the last (bottom) entry from one column over to a worksheet in another workbook. I'm hoping I can just put something in the cell I want to copy to, to reference the bottom cell with data I'm copying from.
I need some VBA code that will allow me to copy the prior columns cell value into the current row if the cell is blank. More specifically if there is a blank cell in column D, then copy the adjacent value in column C to the cell. Hope this makes sence. I've attached a sample spreadsheet that shows my desired output.
Looking to find a way to take the value of one cell and copy it to a column starting from IK5 to the end of column the amount of row will always be different. So if I type "need to call" in cell F1 and I would like to have a macro button to copy this to column IK cell 5 and on to the end of the data. Here is what I have so far.
Suppose I am receiving date in cell A1 form external source on each time I refresh, each time the data that comes in Cell A1 is different based on the source sending this data to me. I want to register whatever come in cell A1 in b1, b2, b3 so on.
