Autofiltering Then Adding Value To Filtered Rows?
Jul 25, 2014
I am able to autofilter a sheet to show only rows with a date in Column U but no "x" in Column BC. Now I want to be able to put an "x" in BC in only the filtered rows. The purpose is if someone enters a date in Column U, the macro will show only those rows minus the rows that have already had an "x" added to BC.
For the most part I've gotten this to work using but it will also put an "x" in Column BC, row 3001 on down.
How can I get it to stop at the last row?
Cells.AutoFilter Field:=21, Criteria1:="<>"
Cells.AutoFilter Field:=55, Criteria1:="="
Columns(55).SpecialCells(xlCellTypeVisible).Value = "X"
View 5 Replies
ADVERTISEMENT
Sep 25, 2012
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies
View Related
Feb 26, 2006
How to speed up Autofiltering? Excel 2003 sp2 hangs up for 10 minutes after
I choose a record in the Autofilter.
View 13 Replies
View Related
Dec 11, 2006
I have a worksheet that is password protected. The userforms used to input all the data have an initialize event that unprotects the sheet to input the data and then before protect the sheet upon closing the userform. This works perfect so that input data cannot be changed once entered; however, the problem I have is that I need to allow autofiltering so users can sort through their input data. I have a command button that unprotects the sheet and places the autofilters in the correct locations, but once this is activated the worksheet then is open for modifications by the users. Is there a way that I can allow autofiltering while still keeping the data protected? If .
View 9 Replies
View Related
Jul 7, 2006
I am trying to make it so a user can input a variable such as a date and then press a button which will autofilter a lot of data by what the user entered. The problem is some of the data I want users to be able to filter by needs to be filtered using "begins with" or is "greater than" or "less than". I can only make it so I can filter by "equals" when I try to do for example "begins with" using "*" it doesn't work out. Here is an example of my code
Cells.Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:= Range("Sheet1!B4").value, Operator:=xlAnd"
This code will auto filter data by what ever is entered into B4 on sheet 1. I can't figure out how I can filter with the "begins with" function or "less than" function using a variable.
View 5 Replies
View Related
Apr 14, 2012
I have recorded a macro which deletes the visible rows after an auto filter is run - ( auto filter is for custom and blanks).
I thought this was working, but when i look at the code, it looks as if the rows to delete have been hard coded in, and not adapting to just delete the filtered ones.
View 8 Replies
View Related
Apr 8, 2013
I am working on solving a problem where I get every other row deleted instead of every row. The situation is that I am using Autofilter to find empty cells in a column that shouldn't have empty cells. Before I can delete them, I need to add them to an array for exceptions handling. This means I need to step through the filtered range and record each unique ID for followup, then delete them. If I delete as I go, the "For Each" doesn't work on the original rows, but works on an increment. This means a deleted row causes the range to shift up one, and I end up deleting every other row.
I know I can solve this by deleting separately from recording them, but am searching for a way to work with the "For Each" maybe using a "Step -1" or something similar.
View 9 Replies
View Related
Aug 19, 2013
So I have the following code:
'Remove UPC sales below $5000
Range("G38").Select
ActiveCell.FormulaR1C1 = "=SUMIF(C[-3],RC[-3],C[-2])"
[Code]....
View 2 Replies
View Related
Jan 6, 2010
I have a spreadsheet with approx 12000 rows.8 columns. it represent material in our inventory and each row is a specific records that contains a lot of info. I need to be able to have a field in a top pane (could be top row i guess. or a small form) where i can start typing text and as i am typing, the spreadsheet auto filter the rows to display only whatever fit my parameters i am typing. a few example of what i will type in are:
bearing*2217
valve*gate*3*150
asco*8344
as you may have guess, "*" is a wildcard. The spreadhseet are generated using crystal reports over night, so i am not sure how i can or should use macros or add in for this..
View 5 Replies
View Related
Dec 11, 2006
When I protect my sheet and have the option to allow the users to autofilter the sheet, how come it doesn't work? I want to allow people to autofilter the data in the worksheet but not modify the contents of the cell.
View 9 Replies
View Related
Oct 12, 2011
To count the genuine number of rows in a worksheet, I use...
count = Cells.Find(What:="*", SearchDirection:=xlPrevious,SearchOrder:=xlByRows).Row
When I add an auto-filter, the above still works fine.
When the auto-filter doesn't reduce the no. rows, the above returns a value of 1.
I've tried using...
count = Rows.SpecialCells(xlCellTypeVisible).Count
... with a result of 1 if no rows are filtered
So, what is the best way to count the populated number of rows on a worksheet where there is an auto-filter that may, or may not, reduce the number of rows ?
View 2 Replies
View Related
Feb 10, 2012
I have a database and a user form. Lets assume the database hosts a list of all cities in North America in column C, with that city's state/prov. in column B, and in column A, that state/prov.'s country.
In the user form, the user will select from the available list in the first combobox either Canada or United States. Based on the selection from combobox1, combobox2's rowlist will contain only the states, or provinces, based on the filtered data. The database will be filtered based on column A, column B now shows only the states or provinces it the US or Canada is chosen respectively.
Based then on the selection in combobox2, the user selects from combobox3, only those cities found in that state or province ... information gathered from a filter of column A (country), column B (state).
Basically, with each combobox selection, the database is being filtered.
View 1 Replies
View Related
Mar 1, 2012
I have discovered that my blue highlighted code posted below isn't deleting the visible rows of filtered data as expected.
Code:
With core_data
.Activate
.Range("D5").Select
Dim rngToDelete2 As Range
llastrow = 0
lmergedelete = 0
llastrow = .Range("a65536").End(xlUp).Row 'calculate the last row visible
'filter the visible rows to include only those rows in which dupphase3 = "DUP" (ie. duplicated rows)
[Code] ....
Additionally, and I'm not sure if it's related to this, but I am receiving an error with the red line .... "Application-defined or object defined error".
View 6 Replies
View Related
May 11, 2012
I can see that I'm not allowed to delete rows from a list when it's filtered. Do I have any options to avoid this restriction?
View 2 Replies
View Related
May 6, 2014
What is required to delete the visible rows post filtering?
ActiveSheet.ListObjects("Table24").Range.AutoFilter Field:=9, Criteria1:= _
"Other"
'insert code to delete visible rows
ActiveSheet.AutoFilter.Range.Offset(4).SpecialCells(xlCellTypeVisible).Cells(1, 2).Select
ActiveSheet.AutoFilter.Range.Offset(4).SpecialCells(xlCellTypeVisible).Select
ActiveSheet.AutoFilterMode = False
Selection.Delete Shift:=xlUp 'this is where the error is occuring.
End Sub
View 3 Replies
View Related
Jun 28, 2006
How do I know how many rows are selected by rngToFilter? I need to add in a conditional statement if its 0.
For Each rngCell In rngUnique
sheetName = rngCell.Value
ThisWorkbook.Worksheets(sheetName).Delete
rngToFilter. AutoFilter Field:=4, Criteria1:=rngCell.Value
rngToFilter.AutoFilter Field:=28, Criteria1:="="
Set rngFiltered = rngToFilter.SpecialCells(xlCellTypeVisible)
Worksheets.Add
rngFiltered.Copy ActiveSheet. Range("A1")
View 6 Replies
View Related
Apr 11, 2008
I have filtered data on Sheet1, which I need just columns A, B & C combined and placed on Sheet2. The below code works, but its defined to copy all rows. I'm unsure of what syntax to use for the loop to copy just the filtered data. Also is there a way to "cycle" through the filters? Example Autofilter "1984" copy ABC to Sheet 2, then AutoFilter "1985" copy to sheet 2 and so on?
For Each Cell In Sheets("sheet1").Range("A:A")
If Cell.Value <> Empty Then
i = i + 1
b = Cell.Offset(0, 0).Value & ", " & Cell.Offset(0, 1).Value & " " & Cell.Offset(0, 2).Value
Sheets("sheet2").Range("A1").Offset(i - 1, 0) = b
End If
Next Cell
View 9 Replies
View Related
May 14, 2009
I have a large spreadsheet which has a column of dates (dd-mmm-yyyy) in it. I would like to be able to filter by month regardless of dd and yyyy. I would like to see all quotes in Jun.
View 2 Replies
View Related
Mar 2, 2012
I need to delete entire row of the result of autofiltering i.e. the visible rows only
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
Is there a way around this with VBA?
I've Seen Copy paste in this forum but in my case i need to delete the entire row.
View 1 Replies
View Related
Aug 9, 2007
I am trying to figure out how to save a worksheet's autofiltering settings and be able to re-create those settings.
I would start off with a spreadsheet with a few Autofilters on. I would like to make a macro that will record the initial Autofilter settings, then the macro would do a bunch of stuff that would need to 'Show All'. After these actions take place, I would like to be able to return to the initial Autofilter settings. I'm not even sure which VBA command should be used for this sort of thing.
View 9 Replies
View Related
Jan 30, 2013
how to delete only visible rows in a filtered list?
View 9 Replies
View Related
Jul 16, 2014
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
View 2 Replies
View Related
Feb 12, 2014
I want to filter my dataset, select column B & C to copy, but exclude the header row. I am having a hard time offsetting the selected range. I get a compile error on what I try.Here is my code (yes, I know, its a little juvenile and I will clean it up, but I need to see things clearer at first):
Sub GetBarrelQualifiers()
'
' GetBarrelQualifiers
[code]....
View 5 Replies
View Related
Feb 15, 2014
My code below is supposed to move filtered rows in 2 sheets ("BANK ENTRIES" and "GL ENTRIES")with "Y"/"y" character on column J which is manually encoded by user. The rule is, before they can move, the total amount in column I in both sheets should match. That is the reason why rows in both sheets should be moved at the same time. I was able to figure out this rule with the use of an If Statement and a message box.
My problem is, if I run the code where there is only 1 row remaining in both sheets, "BANK ENTRIES" would insert a blank row in the third line despite my if statement
[Code] .....
The second problem is, If I run the code on "BANK ENTRIES", my first header on the "GL ENTRIES" will be deleted. If I run also the code on "GL ENTRIES", my first header on "BANK ENTRIES" sheet will be deleted. There must be something wrong on my code. I am attaching my working file for you to have a clear visibility on my problem.
Attached File : xx_xxxx_xxx_Template2_2013-11-30v3.xlsm
View 1 Replies
View Related
Nov 13, 2011
I want to filter and then hide the filtered output in a range of data. But after I hiding, when I remove the filter, everything is there again. I don't know how to hide it even filter is removed.
View 7 Replies
View Related
May 3, 2012
Filtering Date Column "A" 1st qtr 2012
Column "C" has numbers where we figure the average of the entire column
Formula: =AVERAGE(C36:C300)
When I filter or not the Date column "A", the Average is still the same.
How can I force it to only average out the rows displayed by the filter
View 4 Replies
View Related
Apr 1, 2009
I have a large *.tab file with around 450,000 records. I opened the file in excel and then filtered two columns where there are values equal to 0.
I then highlight all the rows and try to delete them, but I receive the following error popup box:
"Microsoft Excel cannot create or use the data range reference because it is too complex."
How can I delete all these filtered = 0 rows without getting this error??
View 9 Replies
View Related
Jun 7, 2007
I have some checkboxes that filter rows and a text box that should display the number of filtered rows:
If checkbox1 Then
Range("F2").AutoFilter Field:=6, Criteria:="<>0", Operator:=And
TextBox1.Text = "No of Records: " & Selection.SpecialCells(xlCellTypeVisible).Count
The text box is showing 1669380 record when there is only about 250.
View 9 Replies
View Related
Aug 28, 2007
what i need to do is store the number of rows visible on the data sheet (after a data filter is applied) into a variable so i can do a calculation with said data. Is there such a command?
for example....
data:
row header a | row header b
line 1
line 2
line 3
after auto filter:
row header a | row header b
line 2
code stores number of rows visible into a variable....
vVariable = rows visible... in this case 2 (NOT 4... which is the total rows including hidden)
View 5 Replies
View Related
Oct 4, 2005
I have a spreadsheet which I distribute weekly to certain people.
It is basically a top level view of incidents, which shows the following.
Sheet Number 1 is :
Person - Count
Joe Bloggs - 42
Fred Bloggs - 12
And so on.
This shows me a summary of how many incidents per person have been logged.
Sheet Number 2 is the actual raw data for that count, so it shows every line.
So in the above example, there would be 42 lines for Joe and 12 for Fred.
What I'd like is to put a hyperlink on sheet 1, whereby if you click onto Fred's name, it will take you to sheet 2 and autofilter to only show Fred's records (i.e 12 of them)
View 9 Replies
View Related
