I would like to average a column based upon another column value. Namely, if one column is a duplicate, I would like to take the column to its right value and average all the duplicates. For example
comp 1409 99.7
comp 1409 99.5
comp 1409 100
comp 1308 65.7
comp 1509 99.5
I would like that to become
comp 1409 99.73
comp 1308 65.7
comp 1509 99.5
I am trying to include numbers in an average if two separate columns prove true. For example, I want to include all numbers in column "C" in the average if the cell in column "A" matches a name and the cell in column "B" is equal to the number 1.
View 2 Replies View RelatedIf my spreadsheet has columns A-H.
A is Date
B is Room Number
C is Location
D,E,F all have numbers results in them.
G is the average of D,E,F for each person
H is group average.
If I want to define a group average in column H where it calculates the average of a group that attended the same location, date and room, for each group that attended would that be possible?
So For Example (Columns DEF left out for clarity)
Date
Rm
Location
G Inidivual Average
[Code]....
So because room number changed it calculated as a different group. Is this possible?
I have three columns of data, one containing numerical values. I want to average the numbers based on the other two columns of data. Attached is an example file with the desired output I'd like. What is a formula that will do this?
AverageExample.xlsx
I have two columns:
A B
1 10
2 9
3 8
4 7
5 6
6 5
7 4
8 3
9 2
10 1
I need a formula that takes the difference of the two columns (1-10, 2-9, etc.) and then finds the average for all of the differences. I don't want to have a third column with the differences and then take the average of those.
I'm trying to figure out if there is a formula I could use that will calculate the average of a group cells in one column based on the condition of another column. It's hard to explain, so I will show an example. All the data is on a one worksheet and I'm trying to show totals and averages on another worksheet. Location, Days
17, 4
17, 3
17, 5
26, 4
26, 8
26, 10
26, 7
On a different worksheet I would want to know what the average days are for each location. So is there a formula that I could use that will look at column A for a specified location number and then average all the days in column B for that location? I'm using Excel 2003 and have tried using the Average(if) but with no success.
I have a pivot that includes customer data and I need to create an average for each row based on the first populated column for each customer. After one month of units appears for the customer, I need to calculate the average going forward, and if there are blanks after that they should be treated as 0 in the average. Below is an example of my description of the pivot.
Jan Feb Mar Apr
Customer #1 1 1 3
Customer #2 1 3
Customer #3 2 2
So, the average for customer #1 would be calculated from Column B to Column E, and factor column D as a 0 in that calculation. Customer 2's average would start in Column C and go to Column E, and factor column E as a 0 in that calculation. Customer 3's average would start in column D to column E.
I am trying to get an average from one column based upon criteria from an adjacent column. The number of days to close a case for race columns Black and White are listed in B5:C16 and E5:F16 and H5:I16. I need a formula to calculate the average days taken to close cases for Males and then the same for Females. Sample below: ...
View 12 Replies View RelatedIt's probably best if you open up the attached example spreadsheet that contains sheets "Before" and "After" otherwise it might be pretty difficult to understand what I'm talking about.
So I have this spreadsheet where I have part numbers in column B, status of the orders in Column I and lead times in Column M. What I want to achieve is to get of Mode (col N), Median (col O) and Average (Col P) values of each part number and each of its status using the lead times in Column M. If possible I would only like this on the top lines of each of these. I have done the formulas manually on sheet After so if you click on the formula you can see the range's it covers.
I did create a concatenation in column K (conc of column B and I) as helper column because in theory this might make things a little bit easier.
Now going into second part. I would also like to do something very similar but only using the part number and status "Finished" and get the values in columns T,U, and V on the top row of each part number. I made some blue boxes and arrows to kind of point out the idea.
The solution can be either formula based or macro, it really doesn't matter, however I will intent to use it within macro either way.
I have a list of 186 random numbers sorted by descending order in column A. In column B I have another statistic of corresponding values to the number in column A. I am hoping to calculate the average of values in column B based on the percentiles of column A. (i.e. for the top 10th percentile values of column A the average B value is X, for the top 20th percentile of values in column A, the average B value is Y).
View 2 Replies View RelatedI am trying to get the average of two columns
column A and Column B
Column A has text (survey type) i.e. Move In, Mid Year, Year End
Column B has the scores given on that survey type i.e. 70
I am trying to get the average of of all the Move In cells from column A
for each survey type so that I get average of all the scores in column B.
I have 2 columns of data in Excel which I have brought a small section of it below. As can be seen the values in the left column have a large spike (difference of more than 10) at certain points (in this case at 34). I wan to find the average of the numbers in the right column but only till the point where the large spike happens (in this case the average of the first 5 numbers). I've tried AVERAGEIF but it's not what I want. I want this to repeat for the entire column and give me the averages of each of these groups.
10
32.4
11
38.6
12.5
23
[Code] .........
I was wondering if there is a way for excel to compare cells and identify when they are identical. My objective for this is as follows. Lets say i have some data entered in cells A1:A10. Suppose cells A1,A3,and A4 had the same value (112-343). Now suppose cells B1:B10 had values also, lets say B1=2, B3= 2.5 and B4=8. I need for excel to go through the A1:A10 range and realize when the A cells have identical values, after this is realized i want excel to take the values in the B cell that correspond to the identical A cells, average them and then store them in cell C. And if there are mutliple identical cells i would like the routine to be able to identify this also. lets say A1=A3=A4=(112-343) and A6=A8=A9=(154-456) ....
View 7 Replies View RelatedHow do I calculate the average based on multiple conditions? Is my syntax incorrect?
Here's what i'm looking for:
=average((IF(X1:X1000=A1)*(Y1:Y1000=B1),AA1:AA1000))
I am trying to calculate averages for a ratio I have calculated. Is there a way I can use VBA or Excel functions to average the G column depending on the value of the D column? In other words, find the average value of column G for all Industry Group = 103. Then, find the average value of column G for all Industry Group = 106. Then put industry group # in column H and avg. value in column I.
View 2 Replies View RelatedE11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
I am trying to calculate some averages. What I have is 3 columns of data in A, B, C, also the "tasks" in A are in named ranges ex: "Award Contract" is a named range - "Task_Award" and "Confirm Updates" is a named range - "Task_Updates". I've attached a sample excel sheet.
I'd like to be able to create a macro to evaluate column A, and for every row in range "Task_Award", give me the average of the corresponding cells in column C and put it in the same range of cells in column B , then, for every row in "Task_Confirm" then give me the average of the same range of cells in column C and place the result in the same range of cells in column B. This is my very first post so I hope I am doing this correctly. I have 77 of these task ranges to evaluate and it will take a long time to do it manually. I'm thinking of a loop function.
I'm not sure if this is the correct way to display my sample data, but here it is (how to change it. I looked in the guidelines, but I can't download anything onto this computer, so I can't get the HTML maker)
A
B
C
D
E
F
G
H
I
1
Descriptor
Group
Identifier
Inventory
Total Vaue
Invetory Type
Group
Total Incomplete Inventory Value
[Code] .......
Here is what I would like in:
The sum of the total value of half finished and unfinished inventory for each group.
So, for group one, it would be 145. For group two if would be 38, and group three would be 316. (displayed in column I)
I think an array formula would do this, but I'm not really sure how this would work.
I have successfully populated a website forms using Excel VBA. As a continuation of this task, i need to calculate the total of a column based on two other columns in the same worksheet.
Column A contains Date, column B contains 3 fixed alphabets (I, L and K) and column C contains time. I have attached a sample sheet here. sample.xls
How can i write a VBA code to find the sum of effort values of column C for each values in column B for a given date (value in column A).
15.png
Attached is the file & snap shot for the problem.
TABLE A
[table="width: 500, class: grid"]
[tr]
[td]Catagories state names devices
A4-100HP A ALT
[Code] .....
TABLE B
Catagoriesstate names devices
A4-100HP
A4-101MP
A4-102AP
[Code] ....
In above condition we want to have an automatic filling up of data in table B in column (name & device) but it should match first with state name with category codes of table B & then same with table A in order to avoid any wrong entry because in table A certain states are repeated but codes are unique so we want that filter should match two column of each table before filling data in table B.
with a simple code that could:
If column K2:k466 is blank or says "No" then columns L & M are hidden. If it says "Yes" it is not hidden.
Also,
If Column N2:N466 is blank or says "No" then Columns O,P,Q,R are hidden. If it says "Yes" they are not hidden.
Finally,
If Column V2:V466 has a zip code (or number) then columns T,U,W,X,Y,Z,AA,AB,AC are present. If there is no value in any of V2:V466 then they are hidden. .
I'm trying to hide columns based on information in another column. If that column contains "A" or "B", hide columns "U" through "W". If it contains "A", "B", "C", or "D", hide columns "V" through "W". Etc, etc., so on and so forth...
I've snipped the code I found earlier and modified it to (what I thought) was correct for my application, but it doesn't seem to do anything. (btw, should I get an error if it doesn't run correctly?)
Here is the code as modified:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "P:P" Then
If LCase(Target.Value) = "A" Or LCase(Target.Value) = "B" Then
Columns("U:W").EntireColumn.Hidden = True
ElseIf LCase(Target.Value) = "A" Or LCase(Target.Value) = "B" Or LCase(Target.Value) = "C" Or LCase(Target.Value) = "D" Then
I have three columns as follows:
ItemsWeekEnding Count
a14/7/2007 10
a34/7/2007 3
a14/14/2007 11
a14/7/2007 5
a44/7/2007 6
a14/21/20078
a44/14/20072
a34/21/20071
a24/7/2007 6
a14/28/20077
a24/21/20074
a94/28/20079
I want to Sum Count values (column 3) for matching WeekEnding (Column 2) and Items (Column 1), example:
a1 4/7/2007 15
as a1 for this weekend is occuring twice.
I need the formula to do it in excel.
In the sheet I'm currently working on I have a column (column C) that uses a validation so that users can select from a number of call types (data tracking in a call center). I allowed for an "Other" option, with a free-form column (column D) dedicated to the "other" reason in case the list doesn't cover the type, but I'm running into a problem where people use the other column to describe call types already listed. Is there anyway to lock the Other column (column D) unless Other is selected in the drop down in the Call Type column (column C)? The sheet I'm working with contains confidential data so I can't post it, but if this isn't clear enough I can draw up a mock sheet.
View 5 Replies View RelatedI have the following variables in these columns
Column 1: Ship (1064, 1065, 1066 as the field contents)
Column 12: Date (21-Feb-08 as format)
Column 13: Weld Length (1000 as format)
Column 15: Defect Length (1000 as format)
What I need doing is the following is in a single cell per month add up what the total weld length is as well as the defect length as I have Jan 08, Feb 08 etc on another sheet where these values will be returned.
There is a seperate sheet for each Ship so would like a formula that I could ammend 1064 to 1065 etc
i am trying to complete a spreadsheet which most of it is done but one column i have i have to average everyother square in each column which i did but when i total those columns at the end i get the dreaded #div/01 which means any value that i dont have in a particular column it will not add is there anyway to fix this. i am attaching a sample of the spreadsheet so you can see exactly what i am trying to do .
View 6 Replies View Related In the attached, sheet 2 has a formula that pulls the Item (column B) from Sheet 1 based on Instocks (column F) being less than the value in N2. Would it be possible to add a second criteria to the formula in sheet 2? In short, can I pull the item from column B of sheet 1 into sheet 2, where in sheet 1, column F values are less than N2 AND where column G values are greater than O2?
I'd love to just vlookup the fill rate value and then filter it down, I know at some point I will be asked to weed it down a bit via a formula instead.
I'm trying to create a macro that will look at the values in one column (column G) and whenever there is a new value, it will copy the data from 2 other columns (I and J) into a new sheet with the original column as the title. I can't think of a better way of explaining that so I've attached a sheet with 'Raw data' being the source sheet and 'Outcome' being the hoped for final product.
I have color coded the sheet to show where the data is coming from, but do not want the colors in the actual sheet.
I have 1 sheet called Setup which users enter their character name, their class, and their race, additionally the entire workbook manages data for up to 9 individual characters.
On another sheet called C|R|E, I have tasks listed that are based on each class type and each race type that are available. Currently there are nine classes and four races. Currently on this sheet each class and each race has its own individual data lists and such, and formulas are done in a way that user inputted data can be entered anywhere, but wont count unless the class and race match those selected on the Setup sheet. To keep the sheet short in appearance I used command buttons to hide/unhide classes or races not in use by the user.
What I was wondering is (and this could be hard to describe), can data in one column be changed to reflect data based on another column's focus? I will explain in more detail.
Column B contains the task information for each Class and Race. For example Cells B13-B51 for one class, Burglar. Columns D-L is where users enter data to show if the task is completed or not. In this example lets say the users first character listed on the Setup sheet is a Champion. What I want to do is check the Setup sheet Char 1. Then based on what Char 1 is selected as on the Setup Sheet, C|R|E B13-B51 data is changed to reflect it, IF Column D currently has focus. If Column E gets focus then B13-B51 changes based on the class selected on the setup sheet for character 2. and etc.
If this can be done I can remove the 13 different sections and have it down to 2 sections, one for class, one for race. For now I am using check boxes to hide classes and races they are not currently using, but would like to move all classes into one table and all races into one table to they dont have trouble with columns they have to skip over currently.
This is a sample of how I am currently working on the C|R|E sheet, the full code is much much longer since I am using so many command buttons.
Basically; there are three main columns in the first worksheet (lets call it "Main Data"): OrderNumber, TaskName, SignOffDate with data listed as follows. The actual spreadsheet has hundreds of order numbers but i'll keep it simple and lets go with two.
OrderNumber
TaskName
SignOffDate
1
OED
01/05/2012
[Code] ........
What I am trying to do; is sort this data in a second worksheet (lets lable it "Output") so that the sign off dates for each task; for each order; are listed within 1 single row. Ie:
OrderNumber
OED
CTN
FAD6
RFS
1
01/05/2012
17/05/2012
22/05/2012
02/06/2012
2
03/05/2012
19/05/2012
27/05/2012
02/06/2012
There are many orders in the main data; and I'm not sure what to do exactly to return the sign off dates for each task for each order without creating separate worksheets for each task name; then using vlookups to find each date.
An order may have a sign off for all task names, or none at all. In addition to this; they may not always be in the same order as listed above.
I'm using Excel 2010.