Average Of Last 4 Cells That Match Current Cell
Jan 6, 2009
I am trying to do something with some data and I am not sure if it is possible. Even if it is, I have no idea how to do it. I was wondering if you could help.
I am trying to get an average of cells that are in the same row as the last 4 cells to match a certain criteria (which happens to be a cell).
Please see attached spreadsheet for example as it is very hard to explain.
D2 = the average of the next 4 figures in column E that are in the same row as the next 4 team names from column B to match B2
For example D2 would be equal to:
AVERAGE(E29+E48+E72+E86)
For example D86 would be equal to:
AVERAGE(E105+E122+E152+E177)
If this doesnt make sense, please ask and I will endeavour to make it clearer.
Example spreadsheet:
Spreadsheet attatched in post 4.
View 9 Replies
ADVERTISEMENT
Aug 4, 2012
I would like to generate an average of Row 1 to Current Row in a column. The Average column is the column that I would like to know how to generate.
Date
Value
Average
08/04/2012
5
5
08/04/2012
10
7.5
[code]....
I got close with =AVERAGE(OFFSET($D$1,COUNT($D$1:$D2),0,COUNT($D$1:$D2))), but after a couple rows of it being correct, the average starts to fall.
Using the above:
Value
Average
Should be
7.07
7.07
7.07
7.23
7.120
7.15
[code]....
View 2 Replies
View Related
Aug 21, 2012
I have the formula for calculating a 13 week rolling average, but I need to be able to set goals in the future and still have the average calculate from current and not from future.
I have my dates set up in row 3 (these dates are all mondays, not every day) and my data in row 4. I need the 13 week rolling average to calculate starting from the prior monday and going back 12 more mondays for the 13 weeks. IE: This monday I'm running reports that the info will be entered into the previous week's monday.
Here is the formula that I'm currently using: =AVERAGE(OFFSET(K4,,COUNT(K4:BV4)-13,,13))
The formula works but will calculate the average for 13 weeks prior based on the last cell with data in it. It's calculating the average of the last 13 weeks of next year.
how to make this work without having to remember my weekly goals every week??
View 6 Replies
View Related
Oct 31, 2006
I would like to select a range of cells relative to the current cell and move them to the right two cells. Basically, if I were in cell A1 I want to be able to have a macro select A1 - A8 and move them over by two cells leaving A1 and A2 blank.
Excel 2003
View 9 Replies
View Related
Mar 28, 2014
Is there any way to use an INDEX and MATCH formula based on the row that is currently selected? If not, is there any other function that can be used to accomplish the same?
I need the formula to use whatever is in column A of the current row selected as the criteria used to match the information to be returned.
View 3 Replies
View Related
May 23, 2013
is there any formula that i can use that will provide me with the most current termination date of a specific driver
i was thinking something along the lines of
=IFERROR(INDEX(I:I,MATCH(L2,MAX(H:H,0))),"-")
this obviously doesnt work, how to get where i need to be!?!
View 7 Replies
View Related
Mar 11, 2014
I needed a code that would input the current date and time in the cells in column N whenever changes were made to any cells in the row from columns A to M. For example, if I change a name in cell 6D, then cell 6N would automatically change to the current date and time.
I found a useful code on a forum (maybe here, don't know for certain) and modified it to suit my needs (see below). I am however now getting a debugging error suggesting that the second line that reads "Private Sub Worksheet_Calculate()" is causing an error.
View 11 Replies
View Related
Mar 4, 2012
I have a Macro 'Timenow' to give current time in a Cell of MS Excel, but then it changes all Cell values of sheet where the macro was used.
Sub Timenow()
'
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "h:mm"
Range("F5").Select
End Sub
Even assigning value to variable does not work:
Sub Timenow()
' Timenow Macro
' Keyboard Shortcut: Ctrl+b
Dim TN As String
TN = Format("=now()", "h:mm")
ActiveCell.Value = TN
End Sub
how to restrict the macro to change the value of current/active cell only without effecting other cell values?
View 4 Replies
View Related
Dec 8, 2012
I have a spreadsheet witht the following design:
Column A = Date
Column B = Value 1
Column C = Value 2
I have a folder with excel files named by date (e.g. 081212 = 8th December 12). Within each of those files is Value 1 and Value 2. They are always in the same cell (B6= Value 1, B16= Value 2).
How can i create a macro/script where the Values in Column B and Column C in my spreadsheet are automatically updated where there is a Date in Column A but no values in Column B or C?
In other words, i need the script to read the date in Column A and if Column B and Column C are blank, then it needs to find the corresponding date excel file and copy Value 1 and Value 2 into the cells in my spreadsheet.
View 3 Replies
View Related
Jun 14, 2013
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
View 14 Replies
View Related
Aug 15, 2014
I have a spread sheet with towns listed in Column G from row 3-81. I months going across row 2 as column labels (they are dates in Jan-14 format). They go from column H-AF.
What I want to happen is to have a formula (not in VBA) which will compare the month in row 2 versus the current month. If it is more than 5 months ago I would like it to return the town in column G for the corresponding row. The only thing I am using to "mark" the last time the town was worked is an X so that is all it needs to look for.
View 9 Replies
View Related
Dec 12, 2012
i want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies
View Related
Mar 15, 2013
I need to calculate the average based on SKU patterns.
For example, if the SKU begins with "CZD", then take the average SKU that meets that pattern.
SKU
Items Sold
CZD80
45
[Code] ......
View 8 Replies
View Related
Aug 14, 2014
What I want to do is the following, I have two sheets, one where the data needs to be filled and the second where the date needs to be looked up. In Sheet1 I need to find a date for each of the NR2 and NR1 combination. But in the second sheet there are multiple NR1 occurences and also single occurences. So if there is only one, I need that date, if there are several I need the average of all the occurences for NR1, not taking into account the N/A ones.
(some examples from the file)
NR2 NR DATE
100707987121951
100702347121960
100707750121960
100707721121960
100702422121960
[code]....
So for example, NR1 121965 has two dates, 03/09/2002 and 27/01/2004, so here it should calculate the average of these two and put that average in the first sheet.
I was thinking of something like IF(MATCH(?) gives one result,put that with vlookup, else AVERAGE of all MATCH that are not N/A)
View 3 Replies
View Related
Jan 3, 2008
The attached workbook has two tabs:
1. Burn Rate - this is where I need my formula to calculate
2. prorder - this is where the table will be
What I need:
1) from 'Burn Rate', get the 'PO ID' we will look up in the table.
2) go to 'prorder' - when the 'PO ID' there matches that same 'PO ID' from the other worksheet - take the value in column F - this is the number that will be averaged.
In other words - in 'Burn Rate', for a given 'PO ID' (column A), I want to average all of the values that are found in column F in 'prorder', and return that average to 'Burn Rate' (column B).
View 4 Replies
View Related
Jan 29, 2009
I have a condundrum that having trouble solving hoping someone may be able to help...
I am trying to return the contents of all cells that match a value based on another cell.. I have managed to achieve with the forumla below but it only returns the first value matched.
what I wish to do is return all values in ROW E where the value in ROW B equals Deliver and combine into one cell [F1].
ie.
B E F
DELIVER VALUEW VALUEW VALUEY
COLLECT VALUEX
DELIVER VALUEY
The formula I have currently uses index but only returns the first value found. I need to find all values and place in one cell. C5 holds value 'deliver'
=IF(ISERROR(INDEX( 'Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0))),"",INDEX('Salis Today'!$E:$E,MATCH(C5,'Salis Today'!$B:$B,0)))
View 10 Replies
View Related
Apr 4, 2014
I am trying to count unique values of the column tienda with the unique values of the column promo. Output expected below table.
promotienda
pablo a
pablo a
pablo b
juan c
juan c
juan c
jesus d
jesus r
Output:
Pablo: 2
Juan: 1
Jesus: 2
View 1 Replies
View Related
Aug 14, 2009
I have a row D2:ND2 where each cell contains a date from October 1st through to September 20th). I also have a column NI3:NI13 that contains various dates such as Easter or bank holidays. Would it be possible to use conditional formatting (or something else) to highlight all rows below D2:ND2 if the dates specified in each cell in D2:ND2 match any of the dates in column NI3:NI13?
View 4 Replies
View Related
Sep 5, 2013
My Goal: If the value of G8 (which is the result of a count formula) matches the value of G10, then apply formatting to G10 through H11.
View 3 Replies
View Related
Jun 21, 2006
I have 2 TextBoxes (TB1 & TB2) in which a store name and a date are entered. The sheet has many store names and many more dates(shop at the same store on different days). I am trying to get the total of columns L, M & N if TB1 = Column A AND TB2 = Column B. I know where to place the code (in the exit event of TB12(L), TB13(M) & TB14(N)). I have added sample data and updated my sample to make it easier to see what I am trying to do. Can anyone show me how to match up these TextBoxes and cell values or give me a hint as to how to proceed?
View 6 Replies
View Related
Jan 29, 2013
So we had a month long, company paid (woohoo!) "weight watchers" challenge. On 1 worksheet ("Stats"), I have the Name of every Employee (A Column), then their Start Weight (B Column), End Weight (C Column), Department (D Column) and finally Location (E Column).
I know how sensative some people can be about their weight, so I locked the page and created another worksheet named "UI", which will display the "Average End Weight" for each department. So Human Resources would be the department in cell A2 on the UI sheet, with City 1 being the Column Header in cell B1. There are 8 cities (offices) and 23 departments.
So, for cell B2, I want to scan through the "Stats" worksheet and locate all of the cells in the department and location columns that read "Human Resources" and "City 1" respectively. Then grab the "End Weight" for every row that meets these 2 criteria, add them up, and divide by the number of "End Weights" that were grabbed.
My solution would be to make a separate column for each department (and then each city, so essentially 8 columns to represent all the cities for each department), use a nested (maybe 4) IF statements to then list only the end weight if that particular row meets the criteria, then at the bottom of each separate column, add all the shown numbers up and divide, then draw the information from THAT number into the "Average" cell on the UI worksheet. But it isn't very dynamic and if i want to use this sheet next year, there will be more employee info to be added and it would be a mess..further more, it would be...what...23 Departments x 8 Cities x 155 employees = ~28,500 added cells.
View 7 Replies
View Related
Nov 11, 2013
Attached is a sample file.
I can't figure out a formula that will match either 1,2,or0 in column K and offset to corrosponding value in column B. Then average of all values that came up.
how to accomplish this. VBA is acceptable, but formula is prefered.
0.644
0.627
0.641
[Code]....
View 5 Replies
View Related
Nov 17, 2009
I have 2 columns of data and want to be able to merge as follows
COL A COL B
4123567 123.45
4125467 900.56
4356456 456.32
need to get result of
COL a
4123567
123.45
4125467
900.56
4356456
456.32
View 4 Replies
View Related
Oct 19, 2012
I am trying to compare two cells and if they match then I want to fill in a list on sheet one from sheet two.
I have the absolute working when I compare one cell to one cell, but I can't get it to compare one cell to a range of cells (two weeks of days)
Here is the absolute one I have working:
=IF(C1='Data Sorted'!A1,'Data Sorted'!A2,"")
Here is what I tried that doesn't work:
=IF(C1='Data Sorted'!A1:N1,'Data Sorted'!A2,"")
View 6 Replies
View Related
Jan 3, 2014
Setup: I have 2 worksheets with between 8 and 9,000 rows on each
Column A in both worksheets Sheet1 and Sheet2 have an email address in them.
Not all addresses in sheet1 will be on sheet2 and visa versa
Column J on Sheet 2 contains a date
What I need: Column M on Sheet1 is empty
I need a formula to place into Column M on Sheet1 that will
Look at Sheet1:A
Locate the corresponding value on Sheet2:A
Pull the date from Sheet2:J same row into Sheet1:M
View 2 Replies
View Related
Sep 13, 2009
We use a program at work to check items out to individual people but sometimes an item is missed and it takes forever to manually look for who it is. In the attached example, (keep in mind there might be more than 100 people on this list...this is just two people), the first 2 items are a pair (radio and radio case) and the second 2 items are a pair (laptop and laptop case).
Id like a way (condition formatting) to flag a person who has one item from the pair checked out and not the other. (Ive manually highlighted one person who only has one of the paired items...id like this to happen automatically)
EDIT:: If the first person were missing the radio in this example, his name would be highlighted on the line with the matching pair...cell D1 (radio case)
Other information:
Radios will always be RFAMRC***
Radio cases will always be RFAMF****
Laptops will always be RFAMTD***
Laptop cases will always be RFAMTE***
View 3 Replies
View Related
Mar 26, 2009
I have 2 sheets recording feedback and summarising the overall percentages for each trainer.
My boss wants me to do this by month!?!?!
I have created a third sheet but I am not sure how to do the following:
Look up the trainer name
Look up the month
identify the percentages for each category
create an overall average of these percentages
So for example if Jon smith trained twice in JAN getting 100% and 50% in cat1, it would display 75% in the cat 1 cell and so on.
View 7 Replies
View Related
Jul 13, 2009
I need a macro that can search a sheet for a match and then copy all 7 cells to the right of the match. I have attached an example of the sheet that will serve as the database to search, and a userform example that will be similar to the userfrom that will display the copied cells when a match is found. I plan to copy and paste the 7 cells to a different sheet so that the userform can display the results with the control source property. I do not need a way to add to this database. I know very little about searching a database so.
View 6 Replies
View Related
Jul 10, 2013
I am trying to identify matches for company names I have in columns A and H.
I originally used =IF( $A3<>$H3,"No Match","Match")
The issue is that not all of the company names in column A contain "INC","LLC", "CORP", etc. So, I am not capturing all of the matches.
Example:
Column A: American Eagle Outfitters
Column H: American Eagle Outfitters INC
Is it possible to write a formula with the logic that IF A3 and H3 both contain "American Eagle Outfitter" then "Match" or "No Match"?
View 1 Replies
View Related
Dec 7, 2006
Attached is a spreadsheet of 2 tables from B:1 to V:5
I need to shift either rows down if cells from column B do not match column M and vice versa.
How would it be possible to acheive results as shown in B:10 to V:15 through VBA.
View 8 Replies
View Related
