Blanking Cells Within Block Of Cells If Date Parameter Has Not Been Met?
May 30, 2014
Sample Chart.xlsx
I need to enter data every month for the following month (i.e. month end close, for previous month). For this example, let's say I just entered (in May) data for April. Current year is 2014. The attached above is what I have currently, and what I want to achieve. All of the cells have formulas, but I basically don't want data and variances shown for time periods not yet uploaded, so in my example, I should only see filled-in cells for January-April, and not May-December (keep in mind that 2013 data should remain, as these are time periods in the past). I've thought about many scenarios including: modifying the formula but not changing what it is currently doing (essentially gathering and adding data from a different worksheet), conditional formatting to "white out" all cells for months where 2014 data is not available using NOW or similar function. how to do it most efficiently without disrupting what's currently in place. T
This is a project plan with tasks and dates. Column A is the activity number. (Example 1, 2, 3" etc). Column B is the task (Ex. "Complete Report"). Column C is number of days required to complete the task. Column D is the dependency column. (Ex. Cell D2 =1 in other words Task 2 is dependent on task 1). Column E is the date.
I would like to have a seperate start date cell and a go live date cell.
The objective is to enter a start date, and have each column E date increase based on the number of days entered in Column C. If a task is dependent on another and I change the number of days in Column C I need the dependent task to change the same amount of days.
I want to count the nos of cells after selecting some specific parameter in autofilter. I thought this is a simple problem & searched here in various thread but nowhere I found good solution which works nicely. I have attached a excel file where I applied autofilter in the column C & I need to count the nos of cells when I select specific parameter in filter in Column C.
I need is for a block of cells (A1:I4) to be visible at all times. I've frozen the sheet so that the top four rows are always visible, but unfortunately the sheet is quite large, horizontally-speaking, so that when users scroll horizontally, important stuff scrolls off the screen.
task of inserting a block of cells into a worksheet.
I have saved 4 different blocks of cells and depending on an option chosen from a drop down menu i want to select one of more of these sets of data and paste them into a worksheet.
I have quarters of the year. I'm wanting to find a function wherein when I punch in for example year 2012, the cell would give me the sum of the 4Qs. If if change it to 2013, then it would give me the sum of 4Qs for 2013.
See attached sheet : sum from blocks of cells.xlsx
Thats the best I could describe that What I face today is the means to run a VBA Autofilter from an Activecell. The Activecell is a search result. I have a table that spans from A1 to E5000. The Activecell will always be in Column A. What I need to happen in when the Activecell is found an Autofilter is placed in the block of data from Column B to E. The rows will change after every search hence my dilemma. Each block of data has its own header as well
So if my Activecell is A2 then I need B1:E4 Autofiltered then Column E sorted Smallest value to Largest. The Activecell needs to remain static. The size of the blocks of data are exactly the same.
Here is a photo example of the desired result. Untitled.jpg
I have a workbook consisting of two sheets: a Monthly Class Schedule (Divided into five one-week blocks. Each block's vertical is Mon to Fri, the horizontal is 9 class slots. There are 45 class slots pw). Each class has one student and the cells are filled 'Student Number, First Initial, Surname' eg, '666 J Smith'. Students may be scheduled for several class slots per week and some class slots have no students scheduled. When the student attends a 'P'is added at the beginning of the cell eg,'P 666 J Smith'.
The Student Attendance Report has the students listed vertically on the left, arranged by Student Number, and then a column for each week.
At the moment I have to manually count the classes each student has attended for each week and enter the attendance figures in the appropriate week column. It's a PitA so I want to automate the process by using the S#s in the Attendance Sheet to search the week blocks in the Schedule Sheet for 'P S#' and auto-fill the week columns in the Attendance Sheet.
I have attached a small file with a very simple conditional formatting formula used to turn a block of cells green.
However, the formula does not seem to work properly as it only turns half of the cells green. Columns B1 to B18 are also supposed to turn green, but instead remain clear.
I though I could do this with a nested IF statement but it is too cunfusing for me. What I am trying to accomplish is this:
Experiment Is Steward EU ID Location Data Quality GE Entry Order
[Code] ........
I want to have a screen pop-up asking me what my limit < would be for column "ESTCNT" so if I put in 25 or any other number that it would highlight all the rows that are less than 25, then look at the row above and below and if it matches the same number (that is in the cell "Range" of the highlighted column) in column "Range" then copy that row to a new sheet. Meaning all tha rows that match the "Range" would be in the same new sheet.
The rows might be different lengths and that there will not always be a number in cell "ESTCNT". Column headers will always be the same but might not be in the same column each time. And if it is not to hard once it is completed to find column "SPPLOT" in the new sheet created and asking what I want to autofil the column with.
I have a sheet where each month, dependent on results I rank the players, 1,2,3. For months not yet reached I want the cell to be blank, until the data is input, and then rank. I thought the following formula would work but the cells are showing all the players with a ranking of 1 until I input data.
I have a workbook that is pulling data for every hour of the day from an internal website. The macro is built to pull data 24 times (each hour)
ex.(http://url/[""2014/04/01""]/starthour0/endhour1/) (http://url/[""2014/04/01""]/starthour1/endhour2/) (http://url/[""2014/04/01""]/starthour2/endhour3/) and so on.
What I am trying to do is set up a parameter that will reference a certain cell (Master!K5) which will contain the date I need to pull. I want to be able to have that cell referenced automatically and input the date for each URL in the macro.
I am attempting to use MSQuery to extract records from an Oracle transaction table by passing user defined Date/Time field parameters.
So if the date range for the query is for Fiscal Period 10 of this year, my parameters would be: [StartDate] = #2002/10/1# [EndDate] = #2002/11/1#
Daily transaction activity is in the early morning hours ending at 6:00AM so my Criteria is: Between [StartDate] + .25 and [EndDate] + .25 Note: The +.25 represents 1/4day = 6hrs (6:00AM)
If I use the hardcoded Start/End Dates, my query works fine, but if I try and pass the dates as parameters I get "ORA-00932 inconsistent datatypes" error. And I can't seem to pass the Date/Time combination successfully....
If anyone has encountered a solution for how to pass a Date/Time Paremeter into MSQuery I would love to hear how you did it. I'm starting to pull my few remaining hairs out!
[ This Message was edited by: Tuner on 2002-11-07 12:23 ]
[ This Message was edited by: Tuner on 2002-11-07 12:28 ]
[ This Message was edited by: Tuner on 2002-11-12 12:51 ]
I have attached the sample. I need the cells without the employee or without a boss to highlight a color and i also need the date of certification to highlight if it is more than one year old.
I have two sets of data to compare. One is real world data, the other is forecasted data. I have real daily data for every day over about 3 months. The predictions though, there may be 4-6 predictions for ever one real daily value.
What I'd like to do is have a function that looks at Column A's date (real daily value) and Column C's date (predicted data) and if Column C equals Column A, then divide corresponding data in Column B by value in Column D.
name | doc date | doc value a | 2009/01/01 | IN111 b | 2009/02/04 | IN222 c | 2009/02/05 | IN333 a | 2009/01/05 | CN111 d | 2009/03/01 | IN444 b | 2009/03/01 | CN222 a | 2009/04/01 | IN555
Firstly, I need to find the LAST DOCUMENT DATE for "a" where #doc_value starts with IN*** (invoice). Manually, I can see that it would be "2009/04/01", but my spreadsheet runs 6000+ entries. I need a function to do this.
Secondly, I need to find the corresponding #doc_value for that date (in this case, IN555).
DONNAS [Single cell, 1st row] 09/08/2003 15:34 [Single cell ( date and time combined) 2nd row]. Do you know of any way that I can move the name, date and time from the above cells to three separate columns on the same row?
I have only one column (A) with thousands of cell entries. Each Cell contains a date and time. (x/xx/xxxx 12:34:56)
For example, Cell A1 = 1/24/13 18:45:22
I want the new cells to only have the time, but have the seconds removed (and not simply hide the seconds). This is because I'll need to run Conditional Formatting to find every cell with a similar time - but I only need similar times within the same minute...it doesn't matter if the seconds are off.
The new cell should just be A1 = 18:45
The real reason I need this is because I need to find every entry that has the same time (with hour and minutes), which I figure I'd use conditional formatting for. My problem is that many entries have the same time but the seconds are off.
In this example, I'd want Conditional Formatting to highlight cell A2 and A3 because they have the same time of 18:45 (not including the seconds). I figured the best way to go about this would be to remove the date and remove the seconds, and run the search that way. However, any way to accomplish goal without deleting the date and seconds would be just as useful.
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I have a spreadsheet which I use to track when a work request is recieved, when we confirm the request and when we action the request. I have been trying to write some code to count the amount of requests, receipts and actions we have processed in the last month.
My first column shows who the request is from The second shows date recieved The third shows date we send receipt The fourth shows the date actioned.
I have two cells. Cell A1 contains ‘The date is ’ cell B1 is formatted in the date format, 2007-01-24. I need to concatenate these two cells so that on cell C1 I have ‘The date is 2007-01-24’ but whatever I try excel keeps on changing the date to a text value and hence I am left with: ‘The date is ‘This is the date'39141 or this is the date 39141. how to get to the result that I am after?
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU() ' ' CopyICUCAPU Macro ' Dim i As Integer
