Block Anything From Being Entered In Cell
May 12, 2006
I have a log that information gets enter into by rows. When one rows info is entered a "Start" button is to be clicked and a macro runs and does different calculations. I want a way to not let the next rows information to be entered until the "Start" button is clicked on or Is there a way to have the code run automatically when the user has entered the info in the last cell of the row and goes back to the first cell in the next row ?
View 3 Replies
ADVERTISEMENT
Oct 31, 2008
I need to merge the contents of an Excel 2007 workbook into a text document, creating a series of paragraphs that look like this: Text text text [contents of cell A1] text text text [contents of cell A1] text. Text text text [contents of cell A2] text text text [contents of cell A2] text. Etc.
Apart from the cell contents, each paragraph will be identical. (I would do this by hand, but there are about 500 paragraphs.). Is there a way to merge the cell contents like that into a text document (Word or whatever)?
View 3 Replies
View Related
Jul 10, 2006
I have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
View 3 Replies
View Related
Apr 18, 2013
I have a Userform that allows the user to input a country from a combobox which after clicking a button writes that data into Cell AH11 in the excel spreadsheet, what I need is for Cell AI11 to read what has been entered into Cell AH11, look up whether or not that country is on a list I have and enter a yes or a no if it is or it isn't on that list.
View 2 Replies
View Related
Feb 21, 2014
I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
View 5 Replies
View Related
Apr 10, 2014
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
View 14 Replies
View Related
Aug 16, 2012
I need to achieve the situation below with a formula. I have tried simply doing, for example, = B3+1 but this throws an error, probably because the value being checked is alphanumeric.
Data
A001
Data
A002
Add next number (A003) when data entered in cell to left
View 2 Replies
View Related
Jan 5, 2013
Currently have a column of cells that after the data has been entered we would like the cell to lock to prevent changes. The sheet is currently protected with the cells in question unlocked (D173:D250). We would like to be able to change the data if we unprotect the sheet. We would also like to be able to add/delete cells (list) in the code as needed.
View 9 Replies
View Related
Jun 24, 2013
So I am having trouble figuring out how to do multiple text to equal multiple numbers. For instance right now I use =IF(E9="JOHN DOE","07", but I would like to have it where IF E9 = John Doe the cell shows 07, but IF the E9 = Sam Doe I want the cell to show 08, and the same IF E9 = Pat Doe the cell shows 09 and so on.
Meaning is there a way to have multiple functions go to a cell dependent on what is entered into E9 for example. I just want to have a number come out in one cell if a certain name is entered in a different cell. I loooked at this post [URL]....which got me started,
View 4 Replies
View Related
Jan 15, 2014
Fill the corresponding cell with last value entered?
View 9 Replies
View Related
Aug 27, 2012
i have an excel file with heading as
VENDOR Bill no Name Bill Date particular total
the problem is that in my co. there are 21 subdivision and the sheet which i get doesn't have any specific column for division
The division details are entered in particular column
so is it possible that when i update sheet every division get a specific colour for them
View 2 Replies
View Related
Sep 24, 2009
How can I check in cell C2 that only let a value to be entered if G2 is 10 and F2 is 20.
I can do the one but not both together
View 9 Replies
View Related
Dec 23, 2009
I need a formula that will basically just display a 1 or 0 in one cell based on the date in the cell next to it.
If the date is older than 180 days then a 0 will be displayed in the cell.
If the date is less than 180 days then a 1 will be displayed in the cell.
I have an attachement as an example.
View 4 Replies
View Related
Mar 20, 2014
I have a protected sheet. When someone enters a value in column A, I want a value to be inserted into the corresponding row in column G.
E.g. When I enter date in cell A45, I want the time this date was entered into cell G45
View 6 Replies
View Related
Jan 31, 2014
I'm putting together a workbook to keep track of income generated from Contractors (I work in recruitment). I have an existing system that displays margin, hours worked and income (margin * hours) but what I am looking for is a neater solution that would still have the margin column, but when hours are entered into a cell it is factored by the margin and displays income in the same cell.
So to be sure I am describing correctly, I am after a formula that will enable me to
1. Enter a value into a cell (for the hours worked - lets call this B1)
2. Multiplies this value by another cell (a fixed amount, the margin - lets call this A1)
3. Displays this result (B1 * A1) in cell B1, the same cell as the hours were entered in.
View 2 Replies
View Related
Oct 15, 2007
Is there any neat little way of preventing a character say '=' from been entered in a cell, kinda similar to the validation but for a 'dont allow' function.
View 14 Replies
View Related
Jan 11, 2010
Not sure if I can do this with a formula or not. looking to change the value of a cell when using a column. Im looking to have the cell to change each time after there is a new value entered in the column but only when a value is entered in new cell of the column.
View 5 Replies
View Related
Sep 28, 2011
I need to calculate the amount of time my daughter will be in daycare which varies each week. I have to give the same sheet that I have hidden calculations on to the center. I have to have the time she arrives at 7:15 AM (Cell A1) however they don't start to bill until 7:45 AM (Cell A2) and continues until 11:30 AM (Cell B1) and need C1 to be total hours between A2 and B1
I need a formula that will calculate the hours between 7:45 AM to 11:30 ONLY if cell A1 has a time entered in it. If A1 is blank then it should calculate 0 hours.
Example (WITH something entered in A1)
Arrive Time End Billable Time Total Billable Time
A1 - 7:15 am to B1 - 11:30 am C1 - 3.75 Hours
Start Billable Time
A2 7:45 am
Example (WITHOUT something entered in A1)
Arrive Time End Billable Time Total Billable Time
A1 - to B1 - 11:30 am C1 - 0.00 Hours
Start Billable Time
A2 7:45 am
If it has to be in 24 hour time is there a formula that I can enter in another cell to convert 12 hour time to 24 hour time again ONLY if A1 has something entered in it?
View 2 Replies
View Related
Jan 27, 2013
I have a command button [Start] that when clicked, will enter the time the process started. I then wish to have the cell locked so the time cannot be changed after it has been entered. I tried this code:
Private Sub CommandButton7_Click()
Range("I5").Select
ActiveCell.FormulaR1C1 = Now()
Cell.Locked = True
End Sub
But am getting an error for the "cell.locked = true"
Any proper code to lock the cell after the data has been entered?
View 4 Replies
View Related
Oct 2, 2013
How do I prevent or allow text to be entered into a Cell or not. Ie if cell A1 contains the word "Text" I want text to be able to be entered in A2, but if A1 contains "No Text" if want to prevent text being entered A2. Is this possible, if so how?
View 1 Replies
View Related
Feb 19, 2009
This seems like a very simple question but I can't find the answer that I'm looking for. I have a spreadsheet with a drop-down ( validation) list. Based on what the person selects, I then would like to have a message box to come that would direct them that certain cells then need to be filled in.
View 4 Replies
View Related
Apr 19, 2007
I found the code below to do almost exactly what i want. However, i would like to know if it can be modified to only affect a specific cell range. In my case, the cell range is B9:AF37.
Option Compare Text 'A=a, B=b, ... Z=z
Option Explicit
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cell As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error Goto 0
If Rng1 Is Nothing Then
Set Rng1 = Range(Target.Address)
Else
Set Rng1 = Union(Range(Target.Address), Rng1)
End If
For Each Cell In Rng1
View 9 Replies
View Related
May 4, 2007
I would like the cell to be red if the value is below 1.5. If the value is 1.5 or greater, I would like for that cell to turn green.
View 3 Replies
View Related
Jul 21, 2007
Is there a simple function to check if a time has been or is entered in a cell, just like the IsDate function.
View 8 Replies
View Related
Oct 23, 2007
I'm trying to create a macro that will check that an Swedish corporate identification number (CIN) is correct. Swedish CIN conist of 10 numbers and are always written 123456-7890. The last number is a control digit to see if the CIN is correct. I've managed to get the macro working but I am not able to get it to work automatically. that is I want the macro to start running immediately after you have entered a companys CIN. In my template you are supposed to enter the CIN in cell A1, and I want the macro to check that immedately when you have pressed "enter". I can not get it to work. the macro works when I do it manually, that is Tools>Macro>Macro..>Run. I've read all about it here but I guess I just don't get it
View 5 Replies
View Related
Jan 22, 2009
I'm working on a project and need some assistance. Using Excel 2007, how do I add up the total of the word "apples" to a cell.
Example: If Cell A1,A10,A25,A30 all have the word apple entered, how do I add them up in lets say cell B10.
Also, I need to do it where I can enter multiple words in 1 cell and have it organized according to how many times the word is used.
View 11 Replies
View Related
Feb 4, 2009
The database that I'm working on divides patient names into three separate columns: lastName, firstName, midInit. My department has several old spreadsheets that have data my boss suddenly wants included in my database. The trouble is, these old spreadsheets have the patient's last name, first name, and middle initial entered into the same column.
There are at least 200 hundred names in these spreadsheets. I absolutely do not want to go back and separate the names into separate columns by hand.
Is there any way to get Excel to take the names entered into one cell and split them into three cells?
I've attached a spreadsheet example that shows what I need to do.
View 6 Replies
View Related
Oct 18, 2009
I'm working in MS Office Excel 2003. I have a spreadsheet with numerous drop down boxes and references to named ranges. Here's my current quandary:
In cell I12, I have a drop down box with listed choices A, B, C and D. In cells I15, I18, I21 and I24, I also have drop downs.
What I'm trying to do is when choice D is picked from I12 it locks cells I15, I18, I21 and I24 so that the choices in the drop down cannot be picked. Also, a popup message is displayed.
I was able to receive help in getting this pretty much taken care of. But the problem I'm having with the code is that the popup message is also being displayed whenever I make a choice from other drop down boxes. So if I choose option D from I12, it locks the other 4 cells and displays the message just fine, but then if I choose anything else from say K12 or L21 then the message continues to come up. Here's what I have...
View 5 Replies
View Related
Jan 23, 2010
Is it possible to do a conditional formating based on a value being entered into the first cell of a row?
Basically when a date is entered into a cell in column A, I want the cells in that same row (A-J) to have a border, even if B-J do not have any value entered into them.
View 9 Replies
View Related
Apr 18, 2013
I have a Userform that allows the user to input a country from a combobox which after clicking a button writes that data into Cell AH11 in the excel spreadsheet, what I need is for Cell AI11 to read what has been entered into Cell AH11, look up whether or not that country is on a list I have and enter a yes or a no if it is or it isn't on that list.
View 3 Replies
View Related
